Lindhaus RX Hepa Base Housing 15″, 18″ Or 20″

The Lindhaus base housing is a genuine Lindhaus replacement part that forms the lower shell of the RX Hepa power nozzle. Offered to match the 15-inch, 18-inch, and 20-inch cleaning widths, this base housing carries the brush roll, road wheels, and drive components and channels airflow from the floor up into the vacuum.

The Lindhaus base housing endures constant abrasion and the occasional hard impact, so it can crack, warp, or wear through at the sole plate over years of use. A damaged base housing can leak air and lose suction, let the brush roll sit at the wrong height, or allow internal parts to rattle loose. When the shell is cracked or worn thin, replacing the base housing is the way to restore a proper seal and correct brush-to-floor contact.

Choose the width that matches your nozzle so the base housing accepts the correct brush roll and belt. This is a full lower-shell replacement, so the drive, wheels, and brush transfer into the new Lindhaus base housing during the swap. Twin City Vacuum has been selling and servicing Lindhaus equipment since 1956 and can help you match the right size. Browse more Lindhaus vacuum parts or view the RX Hepa range on the Lindhaus manufacturer site.

Compatible Models for the Lindhaus Base Housing

• Lindhaus RX Hepa

Lindhaus Base Housing Frequently Asked Questions

What does the Lindhaus base housing do on the RX Hepa nozzle?

The Lindhaus base housing is the lower shell of the power nozzle; it holds the brush roll, wheels, and drive and channels airflow from the floor into the vacuum.

How do I know if my Lindhaus base housing needs replacing?

Cracks, warping, or a worn-through sole plate, along with air leaks, lost suction, or a brush roll sitting at the wrong height, indicate the base housing should be replaced.

What size Lindhaus base housing do I need?

The Lindhaus base housing is available in 15-inch, 18-inch, and 20-inch widths to match the RX Hepa cleaning width. Match it to your nozzle, and we can confirm the size if you are unsure.

How do I order the Lindhaus base housing or get help?

You can select your size and add the Lindhaus base housing directly to your cart on this page, or call us at 763-535-0770. Our staff at 5415 West Broadway, Crystal, MN 55428 has been servicing Lindhaus equipment since 1956 and can help confirm the right size for your machine.

Questions? Call us at 763-535-0770 or visit us at 5415 West Broadway, Crystal, MN 55428.