Lock Washer M6 60506002
$1.99
Genuine OEM lock washer m6 (part# 60506002) used across a wide range of Tornado floor scrubbers, including the BDSO 20/21 central frame. Confirmed on 28 machines.
This lock washer m6 (part# 60506002) is a genuine OEM component used across a wide range of Tornado floor scrubbers, including the central frame of the BDSO 20/21 stand-on machine. The M6 split lock washer is the companion to the M6 nut and screw used throughout these machines, and the factory book lists it on twenty-eight of them.
Small fasteners and washers are the items most often reused past their useful life. They are disturbed at every service, they live in an area that gets wet with cleaning solution, and they carry vibration continuously. A lock washer that has lost its spring no longer does anything, and a screw whose drive has burred cannot be pulled to the right torque. Either way the joint is not clamped, and an unclamped joint wears the parts it was supposed to hold.
Order by part number rather than matching by eye – several similar sizes appear across this machine, and the wrong one either leaves too little thread engaged or sits proud and stops the joint pulling down. Because this item is confirmed on 28 Tornado machines in the factory book, it is worth keeping a few on the shelf if you run more than one of these.
Compatible Models
- Tornado BDSO 20/21 Stand-On Scrubber – TS120-S59-UC, UG and UE
- Tornado 99685 18" BR 18/11
- Tornado 99726 BD 26/26
- Tornado 99760 BD 26/30
- Tornado 99770 BD 26/27
- Tornado 99780 BD 33/30
- Tornado TS350-W20-U (99694)
- Tornado 99680 20" BD 20/11
- Tornado 99695 BR 22/14
- Tornado 99765 BR 28/30
- Tornado 99772 BD 26/27
The factory book lists this part on 28 machines in total; the models above are the ones we have confirmed directly. Call 763-535-0770 with your model and serial number. Twin City Vacuum, 5415 West Broadway, Crystal, MN 55428, since 1956.
Lock Washer M6 FAQ
Which machines does the lock washer m6 (part# 60506002) fit?
The factory parts book lists it on 28 Tornado machines, including the BDSO 20/21 stand-on scrubber and the BD and BR series models shown above.
When should the lock washer m6 (part# 60506002) be replaced?
Any time the joint it sits in is disturbed. A lock washer that has lost its spring or a screw with a burred drive or damaged thread should not be refitted.
Can I substitute a hardware-store equivalent?
We do not recommend it. These are OEM parts specified for the material and the wet environment they work in, and a mismatched grade or finish is the one that fails at the next service.
How do I order the lock washer m6 (part# 60506002) or get help?
You can add it directly to your cart on this page, or call us at 763-535-0770. Our staff at 5415 West Broadway, Crystal, MN 55428 has been servicing Tornado equipment since 1956 and can help confirm the right part for your machine.
{“@context”:”https://schema.org”,”@type”:”FAQPage”,”mainEntity”:[{“@type”:”Question”,”name”:”Which machines does the lock washer m6 (part# 60506002) fit?”,”acceptedAnswer”:{“@type”:”Answer”,”text”:”The factory parts book lists it on 28 Tornado machines, including the BDSO 20/21 stand-on scrubber and the BD and BR series models shown above.”}},{“@type”:”Question”,”name”:”When should the lock washer m6 (part# 60506002) be replaced?”,”acceptedAnswer”:{“@type”:”Answer”,”text”:”Any time the joint it sits in is disturbed. A lock washer that has lost its spring or a screw with a burred drive or damaged thread should not be refitted.”}},{“@type”:”Question”,”name”:”Can I substitute a hardware-store equivalent?”,”acceptedAnswer”:{“@type”:”Answer”,”text”:”We do not recommend it. These are OEM parts specified for the material and the wet environment they work in, and a mismatched grade or finish is the one that fails at the next service.”}},{“@type”:”Question”,”name”:”How do I order the lock washer m6 (part# 60506002) or get help?”,”acceptedAnswer”:{“@type”:”Answer”,”text”:”You can add it directly to your cart on this page, or call us at 763-535-0770. Our staff at 5415 West Broadway, Crystal, MN 55428 has been servicing Tornado equipment since 1956 and can help confirm the right part for your machine.”}}]}






Reviews
There are no reviews yet