Maid Brigade Lindhaus Power Nozzle Cord (2-Prong)

The Maid Brigade Lindhaus power nozzle cord (2-prong) is the genuine 2-prong power cord used on the Lindhaus PB12, PB12e, PB14 and PB14e power nozzles built for Maid Brigade.

What the Maid Brigade Power Nozzle Cord Does

Maid Brigade uses Lindhaus PB12 and PB14 power nozzles that are mechanically the same as the standard Lindhaus nozzles, with one difference: this 2-prong power cord, which lets the nozzle plug into the vacuums Maid Brigade uses. Every other part on a Maid Brigade nozzle is the standard Lindhaus part.

The cord runs from the plug, through the swivel joint, to the brush motor inside the nozzle. It flexes every time the nozzle tilts, gets pinched under furniture and caught in doorways, and is pulled when the nozzle is dragged by the wand, so it is one of the most common parts to wear out on a franchise machine that is used every day.

The Maids machines use a different 3-prong cord, sold as the The Maids Lindhaus power nozzle cord. Maid Brigade nozzles also use their own joint: the Maid Brigade Lindhaus joint complete with cord comes with this cord already fitted. If the swivel joint itself is cracked as well as the cord, it can make sense to replace the joint and cord together.

Signs Your Maid Brigade Cord Needs Replacing

Replace the cord if the jacket is cut, cracked or kinked, a prong is bent or loose, the brush cuts out when the cord moves, or there are scorch marks at the plug or where the cord enters the joint. A damaged cord is a shock and fire risk, so stop using the nozzle until it is replaced. Check the plug against your vacuum before ordering: the Maid Brigade cord is 2-prong.

Twin City Vacuum has been selling and servicing Lindhaus equipment since 1956. See every Maid Brigade part on our Maid Brigade parts page, browse all Lindhaus vacuum parts, or visit lindhaus.com.

Ordering the Maid Brigade Cord

This cord is listed here by name rather than by a Lindhaus part number, because it is a franchise-specific cord rather than a standard Lindhaus catalog cord. It does not have its own callout on the Lindhaus PB drawings: on our Maid Brigade parts page it is shown at the cord callout in each section, in place of the standard Lindhaus cord. When you order, tell us the nozzle model (PB12, PB12e, PB14 or PB14e) and, if you have it, the serial number from the label under the nozzle, and we will confirm the cord before it ships. Fitting the cord means opening the swivel joint, routing the new cord through the strain relief and reconnecting it to the terminal block, so if you would rather not do that yourself, we can fit it for you in our Crystal, Minnesota shop.

Compatible Models

• Lindhaus PB12 power nozzle (Maid Brigade version)
• Lindhaus PB12e power nozzle (Maid Brigade version)
• Lindhaus PB14 power nozzle (Maid Brigade version)
• Lindhaus PB14e power nozzle (Maid Brigade version)

Maid Brigade Lindhaus Power Nozzle Cord — Frequently Asked Questions

What does the Maid Brigade Lindhaus power nozzle cord do?

It carries power from the Maid Brigade vacuum to the Lindhaus PB12 or PB14 power nozzle, in place of the standard Lindhaus power cord.

How do I know if my Maid Brigade power nozzle cord needs replacing?

Replace it if it is cut, cracked or kinked, a prong is bent or loose, or the brush cuts out when the cord moves.

What models does the Maid Brigade Lindhaus power nozzle cord fit?

It fits the Maid Brigade versions of the Lindhaus PB12, PB12e, PB14 and PB14e power nozzles.

How do I order the Maid Brigade Lindhaus power nozzle cord or get help?

You can add the Maid Brigade Lindhaus power nozzle cord (2-prong) directly to your cart on this page, or call us at 763-535-0770. Our staff at 5415 West Broadway, Crystal, MN 55428 has been servicing Lindhaus equipment since 1956 and can help confirm the right part for your machine.