Tornado Main Pulley Assembly X8096A
$165.99
Genuine OEM main pulley assembly (part# X8096A) for commercial high-speed burnishers — the complete pad-drive spindle: pulley, shaft weldment and bearing supplied together. Fits the Tornado Brute Force 2000 (98482B) and 2000 Dust Control (98486).
The X8096A is the complete main pulley assembly on the Brute Force 2000 glazers — shown on the 98482B drawing and on both 98486 drawings. The drawings break it out into its own sub-callouts, which tells you exactly what is in the box: the weldment shaft and plate (X8091), the main pulley itself (X8096) and the rubber ball bearing (X8098). Buying the assembly gets all three in matched condition; buying the pieces individually is the right move only when you have identified one failed component. It is a shared part used across Tornado machines — see the full list of models below.
This assembly is the pad drive. The V-belt from the motor turns the pulley, the pulley turns the shaft, the shaft carries the pad driver and therefore the pad. Everything the operator feels through the handle at speed comes through here, and every gram of imbalance in a worn pad or a bent driver is loaded into this one bearing.
Fit the complete assembly when more than one element has gone, when the shaft is bent, or when you want to put a high-hour machine back to a known state in one operation. The symptoms that point here are a rumble or growl that rises with pad speed, visible run-out at the pad driver, a pulley that wobbles in its groove, or a machine that throws belts no matter how many new belts you fit. On a machine with several thousand hours, replacing the assembly is usually cheaper than two separate teardowns a few months apart.
Inspect the V-belt (X8099-5) and the pad driver (X8862) when you fit a new assembly — a glazed belt or a bent driver will load a new bearing from day one. Note that the Brute Force 1600 (98458B) drawing lists the individual pulley, shaft and bearing but not this complete assembly, so work from your own machine’s drawing. Call 763-535-0770 with your model and serial number if you want help deciding between the assembly and the individual parts.
Compatible Models
- Tornado models:
- P Series 2000 Glazer (115V) — 98482
- Brute Force 2000 High-Speed Glazer — 98482B
- Brute Force 2000 High-Speed Glazer with Dust Control — 98486
Frequently asked questions
What is included in the main pulley assembly (part# X8096A)?
The drawings show it as the weldment shaft and plate (X8091), the main pulley (X8096) and the rubber ball bearing (X8098), supplied together as one matched assembly.
How do I know if my X8096A pulley assembly needs replacing?
Listen and look: a rumble or growl that rises with pad speed, visible run-out at the pad driver, a pulley that wobbles in its groove, or repeated belt failures despite fitting new belts.
Should I buy the assembly or the individual parts?
Buy the individual part when you have identified exactly one failed component. Buy the assembly when more than one element is worn, the shaft is bent, or you want a high-hour machine back to a known state in a single teardown.
What models is the main pulley assembly (part# X8096A) compatible with?
The Tornado Brute Force 2000 High-Speed Glazer (98482B) and the Brute Force 2000 Dust Control (98486). The Brute Force 1600 (98458B) drawing lists the individual pulley, shaft and bearing instead.
How do I order the main pulley assembly (part# X8096A) or get help?
You can add the main pulley assembly (part# X8096A) directly to your cart on this page, or call us at 763-535-0770. Our staff at 5415 West Broadway, Crystal, MN 55428 can help you find the right part for your machine.






Reviews
There are no reviews yet