Motor Assembly D200-0200

$164.14

Genuine replacement motor assembly (D200-0200) for the Titan T4000.2 and TC6000 and Carpet Pro CPU-series commercial uprights. Not sure it fits your model? Call us at 763-535-0770.

The Motor Assembly (part# D200-0200) is a genuine two-stage replacement motor for commercial uprights from Titan and Carpet Pro. It fits the Titan T4000.2 heavy-duty upright, the earlier Titan TC6000 and Carpet Pro CPU-series commercial uprights.

What the Motor Assembly Does

The motor assembly creates the suction and turns the belt that drives the agitator. Its fan draws air through the nozzle, hose and HEPA bag, and its shaft passes through the base of the motor to carry the flat drive belt. In the T4000.2 it sits in the lower body behind the motor cover, held by the rear motor mount and sound suppressor.

Compatible Models for the Motor Assembly

  • Carpet Pro: CPU-series commercial uprights
  • Titan: T4000.2, TC6000

This motor fits the Titan T4000.2, the Titan TC6000 and Carpet Pro CPU-series commercial uprights. Not sure which model you have? The model number is on the label on the vacuum body, or call us at 763-535-0770.

When to Replace the Motor Assembly

Replace the motor when it will not start with a known-good cord and switch, when it hums but does not turn, when it trips the thermal switch after a few minutes of use, or when the bearings scream or grind. Weak suction with a clean bag, filters and hose can also point to a worn motor. If you are not sure whether this part is the cause, our service department can check the vacuum for you.

Replacing the Motor Assembly

Unplug the vacuum, remove the motor cover and disconnect the motor leads. Lift the motor out with its mount, transfer the rear mount, pivot and sound suppressor to the new motor and reconnect the leads exactly as they were. Our service department can install and test it for you.

Buy Genuine Parts from Twin City Vacuum

Twin City Vacuum has sold and serviced vacuums since 1956 at 5415 West Broadway, Crystal, MN 55428. See where this part sits on the Titan T4000.2 motor diagram, browse all Titan parts, or visit titanvacs.com for Titan’s own product information.

Frequently Asked Questions

Does this motor fit the Titan TC6000.2?

No — the TC6000.2 uses motor C625-0103.

How do I know if my T4000.2 motor needs replacing?

It will not start with a good cord and switch, it hums without turning, it keeps tripping the thermal switch, or its bearings grind.

What models is the Motor Assembly (D200-0200) compatible with?

It fits the Titan T4000.2, the Titan TC6000 and Carpet Pro CPU-series commercial uprights.

How do I order the Motor Assembly (D200-0200) or get help?

You can add the Motor Assembly (part# D200-0200) directly to your cart on this page, or call us at 763-535-0770. Our staff at 5415 West Broadway, Crystal, MN 55428 has been servicing vacuums since 1956 and can help confirm the right part for your machine.

Reviews

There are no reviews yet

Be the first to review “Motor Assembly D200-0200”

Your email address will not be published. Required fields are marked *