Motor, Axial Fan, 115 VAC, 3 Blade X2520-115

$189.00

Genuine OEM 115V axial fan motor (part# X2520-115) for the three-blade F5 air mover platform — the drive motor that turns the fan assembly. Fits Tornado Windshear Sidedraft and Powr-Flite PDF5 and PDF5DX; full list below. In stock, ships from Crystal, MN. Call 763-535-0770.

The Motor, Axial Fan, 115 VAC, 3 Blade (part# X2520-115) is a genuine OEM replacement part used on axial-fan air movers from more than one brand. It is the 115V drive motor that turns the three-blade fan assembly, and it is the single most expensive component in the machine — worth diagnosing carefully before it is replaced.

Compatible Models for the Motor, Axial Fan, 115 VAC

The same motor is fitted to the 230V export version of the Windshear Sidedraft (98783), which is not sold in the US and which we do not stock.

Check the cheap things first. A machine that will not spin is far more often a slipping belt, a failed capacitor, a tired rocker switch or a tripped circuit breaker than a dead motor, and all four cost a fraction of what the motor does. If the shaft turns freely by hand, the belt is sound and the switch and breaker both pass, then the motor is the remaining candidate.

Match the blade count when ordering. This is the three-blade motor for the Sidedraft platform; the Windshear Downdraft uses a six-blade motor, X2520-115C, and the two are not interchangeable. Note also that the catalog lists this part under a name containing the word Downdraft, which does not match where the factory record actually places it — on Sidedraft and F5 machines only.

Browse the rest of the Tornado Windshear air mover parts or the Windshear 98782 Sidedraft main assembly, and see the manufacturer specifications at tornadovac.com.

Frequently Asked Questions

What does the axial fan motor do on a Windshear Sidedraft?

It is the machine’s drive motor. Running on 115V, it turns the three-blade fan assembly through the drive belt, and its speed and torque set what the machine can deliver at each switch position.

How do I know if my fan motor needs replacing?

Typical signs are a motor that hums but will not start, one that runs hot enough to smell, bearings that rumble or squeal, or a shaft with visible end play. Before condemning it, rule out the belt, the capacitor, the rocker switch and the circuit breaker — all four produce similar symptoms far more often.

What models is the Motor (part# X2520-115) compatible with?

The factory record confirms it on the Tornado Windshear Sidedraft 98782 and on the Powr-Flite PDF5 and PDF5DX F5 axial fan air movers, plus the 230V export Sidedraft we do not stock. It is a three-blade motor and it is not used on any Downdraft machine.

How do I order the Motor (part# X2520-115) or get help?

You can add the Motor, Axial Fan, 115 VAC (part# X2520-115) directly to your cart on this page, or call us at 763-535-0770. Our staff at 5415 West Broadway, Crystal, MN 55428 can help you find the right part for your machine.

Questions? Call us at 763-535-0770 or visit us at 5415 West Broadway, Crystal, MN 55428.

Reviews

There are no reviews yet

Be the first to review “Motor, Axial Fan, 115 VAC, 3 Blade X2520-115”

Your email address will not be published. Required fields are marked *