Motor Control Panel, Carpet Dryer X8875
$7.99
Genuine OEM motor control panel (part# X8875) — the moulded housing that carries the speed switch and knob on Tornado and Powr-Flite carpet dryers; see the full fitment list below.
Genuine OEM motor control panel (part# X8875) for Tornado and Powr-Flite carpet dryers and air movers. This is the moulded plastic housing at the top of the machine that carries the speed switch, the knob and the strain relief where the power cord enters. It is the part you grip when you carry the dryer and the part that takes the impact when the machine goes over.
The panel is a structural cover rather than an electrical component: the switch clips into its cut-out, the knob passes through it, and the cord is anchored at its collar. Because everything the operator touches is mounted to it, a cracked panel quickly becomes a loose switch and a cord that is no longer held properly.
When to replace it: replace the panel if it is cracked around the switch cut-out so the switch no longer sits tight; if the mounting bosses have stripped and the panel will not pull down flat; if the strain-relief collar is broken so the cord can be tugged directly on its terminals; or if a corner has broken away and left live parts closer to the outside than they should be. None of these are cosmetic — each one puts load on wiring that was never meant to carry it.
It is also the cheapest honest fix on the machine. Operators often assume a rattling control area means a failing switch or motor, buy the expensive part, and still have the rattle. Nine times out of ten the panel itself has cracked at a boss. At well under ten dollars it is worth replacing on sight rather than nursing along.
Fitting: unplug the machine first. Photograph the switch wiring before disturbing it, release the switch from its cut-out, free the cord at the strain relief, swap the panel and reassemble in reverse. Snug the screws into their plastic bosses — these are self-tapping into plastic and will strip if you lean on them.
Compatible Models
- Tornado Windshear SD3500 Model 98776 (and the 98777 230V export version)
- Powr-Flite PD350 and PD500 carpet dryers
- and other Tornado and Powr-Flite air-mover and dryer models — call 763-535-0770 to confirm
Frequently Asked Questions
What does the motor control panel (part# X8875) do?
It is the moulded housing at the top of the dryer that carries the speed switch, the knob and the cord strain relief. It is a structural cover: the switch clips into it and the power cord is anchored to it, so everything the operator touches is mounted on this part.
How do I know if my X8875 motor control panel needs replacing?
Replace it if it is cracked around the switch opening so the switch will not sit tight, if the screw bosses have stripped and it will not pull down flat, if the strain-relief collar is broken, or if a corner has broken away. A loose or rattling control area is far more often a cracked panel than a failing switch.
Is the motor control panel an electrical part?
No. Despite the name it is a moulded plastic cover, not a circuit board or a controller. The electrical parts it carries — the switch and the cord — are separate items. That is also why it is inexpensive.
What models is the motor control panel (part# X8875) compatible with?
It fits the Tornado Windshear SD3500 Model 98776 (and the 98777 230V export version) and the Powr-Flite PD350 and PD500 carpet dryers, plus other models in the same families. Call 763-535-0770 to confirm yours.
How do I order the motor control panel (part# X8875) or get help?
You can add the motor control panel (part# X8875) directly to your cart on this page, or call us at 763-535-0770.
You can add this part directly to your cart on this page, or call us at 763-535-0770.






Reviews
There are no reviews yet