Nut M6 60210608
$1.99
Genuine OEM M6 nut m6 (part# 60210608) used across a wide range of Tornado floor scrubbers, including the BDSO 20/21 central frame. Confirmed on 25 machines in the factory parts book.
This M6 fastener (part# 60210608) is a genuine OEM part used across a wide range of Tornado floor scrubbers, including the central frame and steering column area of the BDSO 20/21 stand-on machine. This M6 nut is one of the most widely used fasteners in the Tornado floor-care range – the factory book lists it on twenty-five machines.
Fasteners in a structural assembly are the parts most often reused when they should not be. They are loosened and retightened at every service, they sit in an area that gets wet with cleaning solution, and they carry vibration every hour the machine runs. Replace any that show a stretched shank, a rounded or burred drive, corrosion in the threads, or damage from cross-starting. A fastener that will not pull up to the correct torque is not clamping its joint however tight it feels on the wrench, and an unclamped joint works loose and wears the parts it was meant to hold together.
Order by part number rather than by eye – the same thread size appears in several variants across these machines, and the wrong one leaves too few threads engaged or bottoms out before it clamps. Check the mating thread while the fastener is out, and because this item is confirmed on 25 Tornado machines it is a sensible one to stock if you run a mixed fleet.
Compatible Models
- Tornado BDSO 20/21 Stand-On Scrubber – TS120-S59-UC, UG and UE
- Tornado 99685 18" BR 18/11
- Tornado 99726 BD 26/26
- Tornado 99760 BD 26/30
- Tornado 99770 BD 26/27
- Tornado 99780 BD 33/30
- Tornado TS350-W20-U (99694)
- Tornado 99680 20" BD 20/11
- Tornado 99695 BR 22/14
- Tornado 99765 BR 28/30
- Tornado 99772 BD 26/27
The factory book lists this part on 25 machines in total; the models above are the ones we have confirmed directly. Call 763-535-0770 with your model and serial number. Twin City Vacuum, 5415 West Broadway, Crystal, MN 55428, since 1956.
Nut M6 FAQ
Which machines does the M6 fastener (part# 60210608) fit?
The factory parts book lists it on 25 Tornado machines, including the BDSO 20/21 stand-on scrubber and the BD and BR series models shown above.
Can I substitute a hardware-store equivalent?
We do not recommend it. These are OEM fasteners specified for the material and the wet environment they work in, and a mismatched grade or finish is the part that fails at the next service.
When should the M6 fastener (part# 60210608) be replaced?
If the shank has stretched, the drive is rounded or burred, the threads are corroded or damaged, or it had to be forced in either direction.
How do I order the M6 fastener (part# 60210608) or get help?
You can add it directly to your cart on this page, or call us at 763-535-0770. Our staff at 5415 West Broadway, Crystal, MN 55428 has been servicing Tornado equipment since 1956 and can help confirm the right part for your machine.
{“@context”:”https://schema.org”,”@type”:”FAQPage”,”mainEntity”:[{“@type”:”Question”,”name”:”Which machines does the M6 fastener (part# 60210608) fit?”,”acceptedAnswer”:{“@type”:”Answer”,”text”:”The factory parts book lists it on 25 Tornado machines, including the BDSO 20/21 stand-on scrubber and the BD and BR series models shown above.”}},{“@type”:”Question”,”name”:”Can I substitute a hardware-store equivalent?”,”acceptedAnswer”:{“@type”:”Answer”,”text”:”We do not recommend it. These are OEM fasteners specified for the material and the wet environment they work in, and a mismatched grade or finish is the part that fails at the next service.”}},{“@type”:”Question”,”name”:”When should the M6 fastener (part# 60210608) be replaced?”,”acceptedAnswer”:{“@type”:”Answer”,”text”:”If the shank has stretched, the drive is rounded or burred, the threads are corroded or damaged, or it had to be forced in either direction.”}},{“@type”:”Question”,”name”:”How do I order the M6 fastener (part# 60210608) or get help?”,”acceptedAnswer”:{“@type”:”Answer”,”text”:”You can add it directly to your cart on this page, or call us at 763-535-0770. Our staff at 5415 West Broadway, Crystal, MN 55428 has been servicing Tornado equipment since 1956 and can help confirm the right part for your machine.”}}]}






Reviews
There are no reviews yet