Vacuum Sensor 021340000

The Lindhaus vacuum sensor (part# 021340000) is a genuine Lindhaus replacement component used across several upright and commercial Lindhaus machines. This small electronic sensor sits inside the main body of the cleaner and reports the operating state of the brushroll and motor circuit to the machine, allowing the vacuum to respond correctly during normal use. When the original Lindhaus vacuum sensor stops working, the machine can behave erratically, so keeping a known-good replacement on hand keeps your cleaner running the way the factory intended.

Because the same sensor is shared by so many Lindhaus models, this is one of the more commonly requested body parts we stock. The Lindhaus vacuum sensor is an original equipment part, not a generic substitute, so it fits and functions exactly like the one you are removing.

What the Lindhaus vacuum sensor does

The Lindhaus vacuum sensor monitors the machine’s internal switching and feeds that signal back to the control circuit. A healthy sensor lets the vacuum start, run, and shut down predictably. A failing one is a frequent cause of a machine that will not power up correctly, cuts out during cleaning, or ignores its controls even though the cord, switch, and motor all test fine. Replacing the Lindhaus vacuum sensor is a straightforward way to rule the sensor out before condemning more expensive assemblies.

Signs your Lindhaus vacuum sensor needs replacing

Intermittent operation, a machine that stops and restarts on its own, or controls that no longer respond are the classic symptoms. If your Lindhaus has been checked for a good cord and switch and still misbehaves, the sensor is a smart, inexpensive next step. Twin City Vacuum has been selling and servicing Lindhaus equipment since 1956, and our technicians can help you confirm whether the sensor is the culprit. Browse the full Lindhaus vacuum parts catalog for related body components, or read more about the machines on the official Lindhaus site.

Compatible Models for the Lindhaus vacuum sensor

• Lindhaus CH Pro
• Lindhaus CH Pro Eco-Force
• Lindhaus HCP 12"
• Lindhaus HCP 14"
• Lindhaus RX Hepa
• Lindhaus Valzer

Frequently Asked Questions About the Lindhaus vacuum sensor

What does the Lindhaus vacuum sensor (part# 021340000) do?

It monitors the machine’s internal switching circuit and reports it back to the control board so the vacuum starts, runs, and stops correctly.

How do I know if my Lindhaus vacuum sensor needs replacing?

Erratic starting, cutting out mid-clean, or unresponsive controls on a machine with a good cord and switch usually point to a failing sensor (part# 021340000).

What models is the Lindhaus vacuum sensor (part# 021340000) compatible with?

It fits the Lindhaus CH Pro, CH Pro Eco-Force, HCP 12″, HCP 14″, RX Hepa, and Valzer.

How do I order the Lindhaus vacuum sensor (part# 021340000) or get help?

You can add the Lindhaus vacuum sensor (part# 021340000) directly to your cart on this page, or call us at 763-535-0770. Our staff at 5415 West Broadway, Crystal, MN 55428 has been servicing Lindhaus equipment since 1956 and can help confirm the right part for your machine.

Questions? Call us at 763-535-0770 or visit us at 5415 West Broadway, Crystal, MN 55428.