Plastic Brush Bushing 47113010

$28.99

Genuine OEM plastic brush bushing (part# 47113010) for Tornado disc scrubbers – fits the BDSO 20/21 stand-on and the 99617 BD 17/6 automatic scrubber. The low-friction bushing that supports the brush shaft in the deck.

The plastic brush bushing (part# 47113010) is the low-friction sleeve that supports the rotating brush shaft where it passes through the deck on Tornado disc scrubbers. It takes the side load the shaft sees when a pad bites, keeps the shaft concentric so the disc runs flat, and does it without the maintenance a bearing would need. On the BDSO 20/21 it sits in the brush base; on the 99617 BD 17/6 it serves the same role in the squeegee control assembly side of the machine.

This is a wear part, and it wears quietly until it does not. The first sign is usually a change in how the machine sounds at speed – a low rumble or a cyclic knock that was not there before – followed by visible disc wobble and a pad that starts wearing more on one edge than the other. If you lift the deck and can rock the shaft in its bore by hand, the bushing is finished. Running past that point is expensive: a shaft turning in an ovalled bushing hammers the bore in the base or plate behind it, and what would have been an inexpensive bushing becomes a casting.

Replace the bushing whenever the brush shaft or the deck plate comes off, regardless of how it looks – it costs very little next to the parts it protects. Check the shaft for a polished or undersized band where it rides before fitting the new bushing, and confirm the disc turns freely and runs true by hand afterwards.

Compatible Models

  • Tornado BDSO 20/21 Stand-On Scrubber – TS120-S59-UC, TS120-S59-UG and TS120-S59-UE
  • Tornado 99617 BD 17/6 Automatic Scrubber

Call 763-535-0770 with your model and serial number if you want the bushing, shaft and washer confirmed as a set. Twin City Vacuum, 5415 West Broadway, Crystal, MN 55428, servicing commercial floor equipment since 1956.

Plastic Brush Bushing FAQ

What does the plastic brush bushing do?
It supports the rotating brush shaft where it passes through the deck, taking side load and keeping the shaft concentric so the disc runs flat against the floor.

How do I know if the plastic brush bushing (part# 47113010) needs replacing?
Listen for a low rumble or cyclic knock at speed, look for disc wobble and one-sided pad wear, and try rocking the shaft in its bore by hand – any perceptible play means replace it.

What models is the plastic brush bushing (part# 47113010) compatible with?
It fits the Tornado BDSO 20/21 stand-on scrubber (TS120-S59-UC, UG and UE) and the Tornado 99617 BD 17/6 automatic scrubber.

How do I order the plastic brush bushing (part# 47113010) or get help?
You can add the plastic brush bushing (part# 47113010) directly to your cart on this page, or call us at 763-535-0770. Our staff at 5415 West Broadway, Crystal, MN 55428 has been servicing Tornado equipment since 1956 and can help confirm the right part for your machine.

{“@context”:”https://schema.org”,”@type”:”FAQPage”,”mainEntity”:[{“@type”:”Question”,”name”:”What does the plastic brush bushing do?”,”acceptedAnswer”:{“@type”:”Answer”,”text”:”It supports the rotating brush shaft where it passes through the deck, taking side load and keeping the shaft concentric so the disc runs flat against the floor.”}},{“@type”:”Question”,”name”:”How do I know if the plastic brush bushing (part# 47113010) needs replacing?”,”acceptedAnswer”:{“@type”:”Answer”,”text”:”Listen for a low rumble or cyclic knock at speed, look for disc wobble and one-sided pad wear, and try rocking the shaft in its bore by hand – any perceptible play means replace it.”}},{“@type”:”Question”,”name”:”What models is the plastic brush bushing (part# 47113010) compatible with?”,”acceptedAnswer”:{“@type”:”Answer”,”text”:”It fits the Tornado BDSO 20/21 stand-on scrubber (TS120-S59-UC, UG and UE) and the Tornado 99617 BD 17/6 automatic scrubber.”}},{“@type”:”Question”,”name”:”How do I order the plastic brush bushing (part# 47113010) or get help?”,”acceptedAnswer”:{“@type”:”Answer”,”text”:”You can add the plastic brush bushing (part# 47113010) directly to your cart on this page, or call us at 763-535-0770. Our staff at 5415 West Broadway, Crystal, MN 55428 has been servicing Tornado equipment since 1956 and can help confirm the right part for your machine.”}}]}

Reviews

There are no reviews yet

Be the first to review “Plastic Brush Bushing 47113010”

Your email address will not be published. Required fields are marked *