Power Cord, Carpet Dryer, 20 ft., 18/3 SJTW X9719
$23.99
Genuine OEM 20 ft. 18/3 SJTW power cord for commercial carpet dryers, air movers and portable spotters — fits Tornado and Powr-Flite models (see the full list below). Twenty feet of three-conductor 18 AWG cable in a weather-resistant SJTW jacket.
Twenty feet and 18/3 SJTW are both specification. The length is what lets an operator place a dryer where the water is rather than where the outlet is, and it is the reason these machines can be daisy-chained around a room without an extension lead on every unit. The 18 AWG three-conductor construction carries the machine’s running current with its ground intact, and the SJTW jacket is rated for damp locations — which is exactly where a water-damage restoration machine spends its working life.
Compatible Models
- Tornado: 98774 Windshear 3200, 98786 Windshear 3200, 98778, 98834, 98636, TE010-G03-U Pro Spotter, TE011-G03-U Pro Spotter, TE012-G03-U Pro Spotter
- Powr-Flite: PDS1 Powr-Dryer, PDH1 Hybrid 3-Speed Carpet Dryer, PE010-G03-U Photon Portable Spotter
- and other Tornado and Powr-Flite air-mover and dryer models — call 763-535-0770 to confirm
Cords on restoration equipment take more abuse than almost any other part. They get driven over, pinched in doorways, dragged across broken tile and yanked out of outlets by the cable instead of the plug. The failures that matter are a nicked or split jacket that exposes conductors, a plug with a bent or missing ground pin, scorching or melting at the plug face, and a cord that has been pulled hard enough at the machine end that the strain relief no longer grips the jacket.
None of those are field repairs. Taping a split jacket on a machine that works in standing water is not an acceptable fix, and a missing ground pin on a metal-framed machine near water is a genuine hazard rather than an inconvenience. Replace the cord. While it is out, check the strain-relief entry in the right housing (part# X1371) — an elongated slot there means the next cord will take the same abuse and fail the same way.
Frequently Asked Questions
What does the power cord do on a commercial carpet dryer?
The power cord (part# X9719) is the 20 ft. 18/3 SJTW supply lead for the machine. Its three 18 AWG conductors carry running current and ground, the SJTW jacket is rated for damp locations, and the 20 ft. length lets an operator place the dryer where it is needed rather than next to the outlet.
How do I know if my power cord needs replacing?
Replace it if the jacket is nicked, split or shows exposed conductors, if the plug has a bent or missing ground pin, if there is scorching or melting at the plug face, or if the strain relief no longer grips the jacket at the machine end. None of these are field repairs — a damaged cord on equipment used around standing water is a shock hazard.
What models is the power Cord, Carpet Dryer, 20 ft., 18/3 SJTW (part# X9719) compatible with?
It fits Tornado 98774 Windshear 3200, 98786 Windshear 3200, 98778, 98834, 98636, TE010-G03-U Pro Spotter, TE011-G03-U Pro Spotter, TE012-G03-U Pro Spotter; Powr-Flite PDS1 Powr-Dryer, PDH1 Hybrid 3-Speed Carpet Dryer, PE010-G03-U Photon Portable Spotter, and other Tornado and Powr-Flite air-mover and dryer models — call 763-535-0770 to confirm. Compatibility is listed in full in the Compatible Models section on this page.
How do I order the power Cord, Carpet Dryer, 20 ft., 18/3 SJTW (part# X9719) or get help?
You can add the Power Cord, Carpet Dryer, 20 ft., 18/3 SJTW (part# X9719) directly to your cart on this page, or call us at 763-535-0770. Our staff at 5415 West Broadway, Crystal, MN 55428 can help you find the right part for your machine.
Need help identifying the right part? Call Twin City Vacuum at 763-535-0770.





Reviews
There are no reviews yet