Powr-Flite 15in Soft Nylon Scrub Brush (Fits 17in Floor Machine) SN215M

The Powr-Flite 15in Soft Nylon Scrub Brush (part# SN215M) is a genuine Powr-Flite rotary brush with soft nylon bristles that clips onto a 17-inch low-speed floor machine. It is made to scrub and clean finished hard floors, reaching down into grout lines and surface crevices without scratching or dulling the finish.

Compatible Models for the 15in Soft Nylon Scrub Brush

• Powr-Flite Millennium Floor Machine 17″ 1.5 HP — NM171HD
• Fits 17-inch Powr-Flite low-speed floor machines that accept a rotary brush, including the NM171HD and Classic Metal C171HD. This brush is the current replacement for the legacy Powr-Flite models SF215, SF415, SF416, and SF514.

The soft nylon bristles flex into textured and grouted floors to lift dirt from low spots that a flat pad rides over, while staying gentle enough to use on sealed and finished surfaces. Use the SN215M for general scrubbing of tile, grouted floors, and other finished hard floors, or for shampooing where a non-abrasive brush is needed. Replace the brush when the bristles wear short or splay so they no longer reach into the floor texture. For aggressive scrubbing of bare concrete or light stripping, step up to the medium-grit brush (MG215M).

Twin City Vacuum has been selling and servicing Powr-Flite floor-care equipment since 1956. If you are not sure whether the SN215M brush is right for your machine, call us at 763-535-0770 or visit 5415 West Broadway, Crystal, MN 55428 and our staff will confirm the correct part.

Frequently Asked Questions

What does the 15in Soft Nylon Scrub Brush do on the Powr-Flite NM171HD?

On the Powr-Flite NM171HD 17-inch floor machine, the 15in Soft Nylon Scrub Brush (part# SN215M) clips on in place of the pad driver and spins at 175 RPM to scrub the floor. Its soft nylon bristles clean finished hard floors and reach into grout and crevices without scratching or dulling the surface.

How do I know when to replace the 15in Soft Nylon Scrub Brush?

Replace the SN215M brush when the bristles are worn short, splayed out, or no longer reach into the floor texture, or when the brush no longer scrubs effectively. A worn brush leaves the floor unevenly cleaned.

What machines is the 15in Soft Nylon Scrub Brush (part# SN215M) compatible with?

The SN215M is a 15-inch rotary brush that fits 17-inch Powr-Flite low-speed floor machines, including the Millennium NM171HD and Classic Metal C171HD. It is the current replacement for the legacy Powr-Flite models SF215, SF415, SF416, and SF514.

How do I order the 15in Soft Nylon Scrub Brush (part# SN215M) or get help?

You can add the 15in Soft Nylon Scrub Brush (part# SN215M) directly to your cart on this page, or call us at 763-535-0770. Our staff at 5415 West Broadway, Crystal, MN 55428 has been servicing Powr-Flite equipment since 1956 and can help confirm the right brush for your machine.

Questions? Call us at 763-535-0770 or visit us at 5415 West Broadway, Crystal, MN 55428.