Powr-Flite Double Jet Extractor Wand 200 PSI 11002 Jet PFX-2HP

Genuine Powr-Flite OEM double-jet extractor wand, rated to 200 maximum p.s.i., fitted with an 11002 jet (part# PFX-2HP). Two jets instead of one is the whole design: the pair overlap across the head so solution is laid down evenly across the full width of the pass rather than in a single stripe down the middle, which is what lets an operator clean in fewer, straighter passes without leaving dry lines between them.

What the 11002 jet number tells you

The jet code describes the spray — the fan angle and the flow rate at a given pressure — and it is the part that actually determines how the wand behaves on carpet. Replacing an 11002 with a different jet code changes the flow and the pattern, which changes how wet the carpet gets and how much the vacuum has to recover. If you are ordering replacement jets rather than a whole wand, order by that code.

Pressure and fitment

Rated to 200 p.s.i. maximum. Check both the pump and the hose behind it: a 200 p.s.i. wand on a 100 p.s.i. hose assembly puts the weak link in the hose, which is where it will fail. The machines confirmed for this wand in the manufacturer’s where-used record are the Tornado Marathon extractors listed below. That is narrower than the Powr-Flite badge on the wand would suggest, so if you are fitting it to a machine that is not on this list, call us on 763-535-0770 and we will check it rather than guess.

When to replace it

Uneven spray that survives jet cleaning, a jet that will not seal, leaking at the valve or the jet body under working pressure, or a bent tube that stops the head sitting flat on the carpet. If only the spray pattern is wrong, clean or replace the jets before condemning the wand — that is usually the whole problem.

Compatible Models

• Tornado 98166 20″ Marathon 800 (8 Gallon, 115V)
• Tornado 98168 20″ Marathon 1200 (12 Gallon, 115V)
• Tornado 98190 22″ Marathon 2000 (20 Gallon)

Not sure if this fits your machine? Call us at 763-535-0770 with your model and serial number and we will confirm compatibility before you order.

Twin City Vacuum has been selling and servicing commercial floor-care equipment since 1956. Browse the rest of the Tornado 98166 accessories and consumables, or see the manufacturer range at powr-flite.com.

Frequently Asked Questions

Why does the extractor wand (part# PFX-2HP) have two jets?

So the spray overlaps across the full width of the head instead of laying a single stripe down the middle. That lets you clean in fewer, straighter passes without leaving dry lines between them.

What does the 11002 jet code mean?

It describes the spray — the fan angle and the flow rate at a given pressure — and it is what determines how the wand behaves on carpet. Fitting a different code changes how wet the carpet gets and how much the vacuum has to recover, so order replacement jets by that code.

Which machines is the wand (part# PFX-2HP) confirmed for?

The manufacturer where-used record lists the Tornado 98166 Marathon 800, 98168 Marathon 1200 and 98190 Marathon 2000. That is narrower than the Powr-Flite badge suggests, so call 763-535-0770 if your machine is not on the list rather than assuming it fits.

How do I order the double-jet extractor wand (part# PFX-2HP) or get help?

You can add the double-jet extractor wand (part# PFX-2HP) directly to your cart on this page, or call us at 763-535-0770. Our staff at 5415 West Broadway, Crystal, MN 55428 has been servicing floor-care equipment since 1956 and can help confirm the right part for your machine.

Questions? Call us at 763-535-0770 or visit us at 5415 West Broadway, Crystal, MN 55428.