Powr-Flite PF53 15-Gallon Stainless Steel Wet/Dry Recovery Vacuum

The Powr-Flite PF53 is a 15-gallon commercial wet/dry recovery vacuum built around an 18-gauge stainless steel tank — the corrosion-resistant, dent-shrugging alternative to the poly-bodied PF54 at the same 15-gallon capacity. A single 1,200-watt motor pulls 114 CFM with a 100-inch sealed water lift, enough to recover flooded spills, grinding slurry, and bulk dry debris in auto shops, machine shops, and facilities where the tank takes daily abuse.

Choose the PF53 over the poly PF54 when the vacuum lives in a wash bay, a fabrication shop, or any environment where solvents, road salt, or repeated impacts would eventually crack or stain a plastic drum. The stainless tank wipes clean, shrugs off rust, and is backed by a 5-year tank warranty. Two-stage filtration — a washable permanent cloth filter bag plus a super-performance pleated paper cartridge — keeps fine dust out of the exhaust air on dry pickup, then lifts out for wet recovery. When suction fades on a PF53, the cause is almost always a saturated cloth bag or a loaded paper cartridge rather than the motor, so check and clean the filters first. The 360-degree swivel hose cuff lets you drag the machine around benches and racks without twisting the 1.5-inch by 10-foot hose off the inlet.

Powr-Flite PF53 Specifications

Shipping

Free shipping — ships to your location at no added freight cost. Questions on delivery or setup? Call 763-535-0770.

Compare the Powr-Flite Wet/Dry Recovery Vacuums

All five PF-series recovery vacuums share the same two-stage filtration, 1.5″ x 10 ft swivel hose, and 14″ tool set. They differ in tank capacity, tank material, and motor configuration:

What’s in the Box

• Powr-Flite PF53 wet/dry recovery vacuum (15-gallon stainless steel tank on wheeled dolly base)
• 1.5″ x 10 ft hose with 360° swivel connector
• 14″ rug/floor tool, dust brush, crevice tool, and squeegee
• Washable cloth filter bag and pleated paper cartridge filter

Recommended Accessories & Consumables

The Powr-Flite PF53 15-Gallon Stainless Steel Wet/Dry Recovery Vacuum runs on genuine bags and filters. Keep spares on the shelf so the machine is always ready:

Powr-Flite Wet/Dry Vacuum Cloth Filter with Gasket WD3 — $39.99

Frequently Asked Questions

What is the difference between the Powr-Flite PF53 and PF54?

Both are 15-gallon single-motor wet/dry vacuums with the same 114 CFM and 100-inch water lift. The PF53 (part# PF53) has an 18-gauge stainless steel tank that resists rust, dents, and chemicals; the PF54 has a lighter, lower-cost polyethylene tank. Choose the PF53 for wash bays, shops, and harsh environments where a metal drum lasts longer.

Can the Powr-Flite PF53 pick up both wet and dry material?

Yes. The PF53 is a true wet/dry recovery vacuum. Run the pleated paper cartridge and cloth filter bag for dry dust and debris, then remove them for wet spills and slurry. The 15-gallon stainless tank drains and wipes clean between jobs.

How do I keep the PF53 at full suction?

Loss of suction on the PF53 (part# PF53) is nearly always a filter issue. Empty the tank before it overfills, rinse or replace the cloth filter bag, and tap out or replace the paper cartridge when it loads with fine dust. Also confirm the 1.5-inch hose and swivel cuff are seated and free of clogs.

How do I order the Powr-Flite PF53 (part# PF53) or get help?

You can add the PF53 directly to your cart on this page, or call us at 763-535-0770. Our staff at 5415 West Broadway, Crystal, MN 55428 has been servicing Powr-Flite equipment since 1956 and can confirm the right wet/dry vacuum for your facility.

Twin City Vacuum has been selling and servicing Powr-Flite commercial equipment since 1956. Order the PF53 above, or call 763-535-0770 — our team at 5415 West Broadway, Crystal, MN 55428 can confirm the right wet/dry vacuum for your facility.