Powr-Flite Powr-Scrub 16 inch Cylindrical Brush Floor Scrubber CAS16

The Powr-Flite Powr-Scrub (part# CAS16) is a corded walk-behind automatic floor scrubber with a 16-inch cleaning path, built to replace mopping in small to medium hard-floor areas. A 750 RPM cylindrical brush scrubs while dual floating squeegees and a 1.5 HP vacuum recover the dirty water, so the floor is left clean and walkable in a single pass — forward or reverse. It is purpose-built for textured, grouted surfaces such as ceramic and quarry tile, restoring the floor right down into the grout. Powr-Flite positions it for food-service areas and kitchens, entrances and lobbies, schools, shops, and offices, and it needs little operator training.

Powr-Flite Powr-Scrub CAS16 specifications

The Powr-Scrub has a 16-inch cleaning width and a 20-inch squeegee width. Its solution tank and recovery tank each hold 4 gallons. Rated productivity is 12,500 square feet per hour. The cylindrical brush turns at 750 RPM driven by a 0.2 HP brush motor; the vacuum motor is 1.5 HP with 80 inches of water lift and a 1.5-inch vacuum hose. Pump pressure is 32 psi. It is corded with a 50-foot cord, weighs 92 lbs, and measures 36.5" x 23.5" x 45.5". Sound level is 70 dBA. Warranty is 1 year parts and labor with a 10-year housing warranty.

Shipping

Free shipping — ships to your location at no added freight cost. Questions on delivery or setup? Call 763-535-0770.

How the Powr-Scrub compares to the Powr-Flite walk-behind scrubber family

What is in the box

The Powr-Scrub ships as a complete, ready-to-run machine: the CAS16 scrubber with its cylindrical brush installed, dual floating squeegee assemblies, the 4-gallon solution and 4-gallon recovery tanks, a 50-foot power cord, and the operator manual. Replacement brushes, squeegee blades, and vacuum filters are stocked wear items — call us to add them to your order.

Frequently Asked Questions

What kind of floors is the Powr-Flite Powr-Scrub (CAS16) built for?

The Powr-Scrub is a 16-inch cylindrical-brush scrubber built for hard floors in small to medium areas — food-service areas and commercial kitchens, entrances and lobbies, schools, shops, and offices. The 750 RPM counter-rotating cylindrical brush and vacuum action are especially effective on textured and grouted surfaces like quarry and ceramic tile, scrubbing down into the grout lines and vacuuming the soil back up in the same pass.

Is the CAS16 corded or battery powered, and does it dry the floor?

It is corded — it runs on a 50-foot power cord, so there are no batteries to charge or replace and no run-time limit. It both scrubs and dries in one pass: dual floating squeegees recover the dirty solution in forward and reverse, and the 1.5 HP vacuum motor (80-inch water lift) pulls it into the 4-gallon recovery tank, leaving the floor walkable behind you.

How is the Powr-Scrub shipped and delivered?

The CAS16 weighs 92 lbs and ships free to your location. It is a commercial machine, so it ships free to your business — call Twin City Vacuum at 763-535-0770 with any questions about delivery or setup. We have sold and serviced Powr-Flite floor equipment since 1956 at 5415 West Broadway, Crystal, MN 55428.

What is the difference between the Powr-Scrub (CAS16) and the Multiwash scrubbers?

All are corded cylindrical-brush machines, but the Powr-Scrub is the heavy-duty tile-and-grout specialist: a wider 16-inch path, larger 4-gallon solution and 4-gallon recovery tanks, and the highest productivity of the group at 12,500 sq ft/hr. The Multiwash 14 and Multiwash XL 18 are lighter, 1-gallon-tank machines for quick daily washing of hard floors and low-pile carpet. See the comparison table below.

Twin City Vacuum has sold and serviced Powr-Flite commercial floor equipment since 1956. Questions about delivery or setup? Call 763-535-0770 or visit us at 5415 West Broadway, Crystal, MN 55428. Manufacturer page: Powr-Flite Powr-Scrub.