Powr-Flite Upholstery Tool with Double Chamber AA144DC

$349.99

Genuine OEM 1-1/2 in. stainless upholstery tool with double chamber, rated to 300 p.s.i. — separate solution and recovery paths in one head for a better rinse and a drier finish. Fits the Tornado 98166 Marathon 800, 98168 Marathon 1200 and 98190 Marathon 2000 extractors.

Genuine OEM upholstery tool with double chamber (part# AA144DC) — 1-1/2 in. stainless steel, rated to 300 p.s.i. The double chamber is the point of the design: solution is delivered and recovered through separate paths within one head, which keeps the spray from being pulled straight back out before it has done any work. On upholstery that means better rinse and a drier finish than a single-chamber tool of the same width.

What the pressure rating means for you

The 300 p.s.i. rating is a ceiling, not a target. Fitting this tool to a machine or wand that delivers more than 300 p.s.i. will make it leak at the head long before it wears out, and that is the most common way these tools are ruined. Check what your pump and wand actually deliver before ordering, and match the tool to the pressure rather than to the connector. The 1-1/2 in. cuff is the standard fitting across the extractors listed below.

When to replace it

Replace the tool when the glide face has worn enough to drag or mark fabric, when the jet will not produce an even fan after cleaning, or when it leaks at the head under working pressure. A stainless head takes a lot of abuse, so a tool that leaks after light use has usually been run above its pressure rating rather than worn out.

Fitment

The machine coverage below comes from the manufacturer’s own fitment record for this part number. Note that it is narrower than the tool’s 1-1/2 in. fitting would suggest — a connector that physically fits is not the same as a confirmed fitment, so if your machine is not on the list, call us before ordering and we will check it rather than guess.

Compatible Models

Not sure if this fits your machine? Call us at 763-535-0770 with your model and serial number and we will confirm compatibility before you order.

Twin City Vacuum has been selling and servicing commercial floor-care equipment since 1956. Browse the Tornado 98166 accessories and consumables, or see the manufacturer range at powr-flite.com.

Frequently Asked Questions

What does the double chamber on the upholstery tool (part# AA144DC) do?

It separates the solution and recovery paths within a single head, so the spray is not pulled straight back out before it has worked. On upholstery that gives a better rinse and a drier finish than a single-chamber tool of the same width.

Can I use the upholstery tool (part# AA144DC) on a high-pressure machine?

Only up to 300 p.s.i. That rating is a ceiling. Running it above 300 p.s.i. will make it leak at the head long before it wears out, which is the usual way these tools are ruined. Check what your pump and wand actually deliver rather than going by the connector.

What models is the upholstery tool (part# AA144DC) compatible with?

The manufacturer fitment record lists the Tornado 98166 20 inch Marathon 800 (8 gallon, 115V), the Tornado 98168 20 inch Marathon 1200 (12 gallon, 115V) and the Tornado 98190 22 inch Marathon 2000 (20 gallon). The 1-1/2 inch cuff fits more machines than that physically, so call us if yours is not listed.

How do I order the upholstery tool (part# AA144DC) or get help?

You can add the upholstery tool with double chamber (part# AA144DC) directly to your cart on this page, or call us at 763-535-0770. Our staff at 5415 West Broadway, Crystal, MN 55428 has been servicing commercial floor-care equipment since 1956 and can help confirm the right part for your machine.

Questions? Call us at 763-535-0770 or visit us at 5415 West Broadway, Crystal, MN 55428.