Screw, 1/4-20 x 3/4 in, Pan Head Phillips, Stainless 7EW001
$2.99
Genuine OEM 1/4-20 x 3/4 in stainless steel pan head Phillips screw (part# 7EW001) — a shared fastener used across Tornado and Powr-Flite floor-care machines, including the Windshear 3000 Series D.
Genuine OEM screw, 1/4-20 x 3/4 in, pan head Phillips, stainless steel (part# 7EW001). This is one of the most widely shared structural fasteners in the Tornado and Powr-Flite range, used wherever a machine needs a corrosion-resistant 1/4-20 bolt of this length — motor mounts, handle brackets, frame fixings and tank hardware among them. On the Windshear 3000 Series D air mover it is used in the motor and housing assembly.
The stainless specification is the point. This is not a plated-steel screw that happens to look similar. Extractors, carpet dryers and floor machines all live around water, detergent and chemistry, and a zinc-plated fastener in a wet location will rust, swell in its hole and seize. Stainless costs a little more and comes out again in five years. Substituting a plated screw in a wet position is the single most common reason a later repair turns into a drilling job.
When to replace it: if the Phillips recess is chewed and a driver slips, if the threads are damaged or galled, if the head is deformed from over-torquing, or if the screw has been replaced at some point with a plated one that is now rusting. Any screw that needed heat, penetrating oil or vice grips to remove should be replaced rather than refitted — it will be worse next time.
A note on quantity: machines use these in groups. If you are pulling a motor mount or a handle bracket, count the fasteners before you order and allow a spare or two. They are inexpensive and having the right stainless screw on the bench is a great deal faster than improvising from the hardware drawer.
Because it is used so broadly, this is a sensible item to keep on the shelf if you maintain more than one machine. Call us with your model and serial number and we will confirm the count and position for your machine.
Compatible Models
- Tornado Windshear 3000 Series D, Models 98772 and 98773
- Tornado Marathon, Cascade, ProGlazer, PRO and ECO series machines
- Powr-Flite PE and PFX series extractors
- and many other Tornado and Powr-Flite floor-care models — call 763-535-0770 to confirm
Frequently Asked Questions
What does the 1/4-20 x 3/4 in stainless screw (part# 7EW001) do?
It is a general-purpose structural fastener used across a wide range of Tornado and Powr-Flite machines — motor mounts, handle brackets, frame fixings and tank hardware. On the Windshear 3000 Series D it is used in the motor and housing assembly.
Why does it have to be stainless?
These machines work around water, detergent and chemistry. A zinc-plated screw in a wet position rusts, swells in its hole and seizes, which turns the next repair into a drilling job. The stainless specification is what keeps it removable years later.
How do I know if my 7EW001 screw needs replacing?
Replace it if the Phillips recess is chewed so a driver slips, if the threads are damaged or galled, if the head is deformed from over-tightening, or if someone has previously fitted a plated screw that is now rusting. Any fastener that needed heat or vice grips to remove should not go back in.
What models is the screw (part# 7EW001) compatible with?
It is shared very widely — the Tornado Windshear 3000 Series D (Models 98772 and 98773), Tornado Marathon, Cascade, ProGlazer, PRO and ECO series machines, and Powr-Flite PE and PFX extractors, among others. Call 763-535-0770 with your model and serial number.
How do I order the screw (part# 7EW001) or get help?
You can add the screw, 1/4-20 x 3/4 in, pan head Phillips, stainless (part# 7EW001) directly to your cart on this page, or call us at 763-535-0770.
You can add this part directly to your cart on this page, or call us at 763-535-0770.






Reviews
There are no reviews yet