Screw #10 x 3/4 inch A352-8100

The A352-8100 screw (Screw #10 x 3/4 inch) is a genuine Tacony OEM fastener used across the Tacony commercial backpack vacuum range. It is not model-specific — Tacony uses this same #10 x 3/4 inch screw in the housing and upper-assembly joints of thirteen different machines sold under the Tornado, CleanMax and Powr-Flite names.

Compatible Models

This genuine Tacony OEM fastener is shared across multiple brands and models. This part fits:

• Tornado: Pac-Vac 6 Aircomfort (93012 / 93012B), Pac-Vac 10 Aircomfort (93014 / 93014B), PV 6 ROAM (93016, 93016B-1, 93016C-1), PV 6 Back Vacuum 115V (93028), PV 6 Back Vacuum 230V (93029), PV 10 Back Vacuum (93034)
• CleanMax: CMBP-6CL, CMBP6.2
• Powr-Flite: PF600BP-PF1000BP

Not sure if this fits your machine? Call us at 763-535-0770 and we will confirm compatibility for you.

Where the A352-8100 Screw Is Used

On the Pac-Vac and PV backpack platforms this screw appears in the upper and main assemblies, holding moulded housing sections and mounting hardware to the frame. Because those joints are opened every time a motor, filter housing or harness frame is serviced, this is one of the fasteners most often lost or damaged during routine repair work.

When to Replace the A352-8100 Screw

Screws driven into plastic bosses have a limited number of cycles in them. Each removal shaves a little material from the boss and burnishes the thread, so a screw that has been in and out several times will eventually spin without pulling the housing tight. Fit a new one rather than reaching for a longer or wider screw — an oversize substitute splits the boss and turns a fastener repair into a housing replacement. Drive it by hand, not with a powered driver, and stop as soon as the panel pulls flush.

Twin City Vacuum has been selling and servicing Tornado equipment since 1956. Browse more parts on our Tornado vacuum parts pages, or see the manufacturer at tornadovac.com.

Frequently Asked Questions

What does the Screw #10 x 3/4 inch do?

It is a genuine Tacony OEM #10 x 3/4 inch screw used in the housing and upper-assembly joints of Tacony commercial backpack vacuums, securing moulded housing sections and mounting hardware to the frame.

How do I know if my Screw #10 x 3/4 inch needs replacing?

Replace it if the head is cammed out, the drive recess is rounded, the thread no longer bites, or the fastener spins without drawing the panel tight. A screw that will not hold torque has stripped either itself or its boss — fit a new one rather than over-tightening the old.

What models is the Screw #10 x 3/4 inch (part# A352-8100) compatible with?

Confirmed fitment covers Tornado Pac-Vac 6 and 10 Aircomfort, PV 6 ROAM, PV 6 and PV 10 Back Vacuum models, CleanMax CMBP-6CL and CMBP6.2, and the Powr-Flite PF600BP-PF1000BP backpack range. Call 763-535-0770 to confirm your machine.

How do I order the Screw #10 x 3/4 inch (part# A352-8100) or get help?

You can add the Screw #10 x 3/4 inch (part# A352-8100) directly to your cart on this page, or call us at 763-535-0770. Our staff at 5415 West Broadway, Crystal, MN 55428 has been servicing Tornado equipment since 1956 and can help confirm the right part for your machine.

Questions? Call us at 763-535-0770 or visit us at 5415 West Broadway, Crystal, MN 55428.