Screw, #6 x 1/2 in, Pan Head Phillips X8261

$2.99

Genuine OEM #6 x 1/2 in pan head Phillips screw (part# X8261) used across Tornado and Powr-Flite air movers, carpet dryers and extractors — see the full fitment list below.

Genuine OEM screw, #6 x 1/2 in, pan head Phillips (part# X8261), used as a general-purpose fastener across a wide range of Tornado and Powr-Flite floor-care machines. On the Windshear SD3500 air mover it is the small black screw that secures the moulded plastic panels and the control-panel cover to the housing; on the extractors in the same fitment list it does similar duty holding covers, brackets and trim in place.

This is a #6 diameter screw, 1/2 in long, with a pan head and a Phillips drive, finished black so it disappears into dark plastic housings. It threads directly into moulded bosses in the plastic rather than into a nut, which is exactly why it is the part people need: every time a panel comes off for service, the screw is at risk of being cross-threaded, over-torqued, dropped into the blower, or simply lost on the shop floor.

When to replace it: if the head is stripped and a Phillips bit no longer bites, if the threads are galled or the screw turns without ever tightening, if the black finish has worn and surface rust has started, or if a panel rattles in service because a screw is missing. A panel that is not held down squarely can vibrate against the housing, and on an air mover that vibration is audible at every speed. Replacing a chewed screw is a two-minute job that costs a couple of dollars; leaving it is how a plastic boss eventually splits and turns a cheap fix into a housing replacement.

A note on torque: because this screw threads into plastic, it wants to be snugged, not cranked. If you find yourself turning it hard and it still feels loose, the boss is stripped rather than the screw — call us and we will help you work out whether the panel or the housing is the part you actually need.

Because it is a shared fastener, it is worth ordering a few at once. They cost very little and having spares on the bench means a service call never stops for the want of one screw.

Compatible Models

  • Tornado Windshear SD3500 Model 98776 (and the 98777 230V export version)
  • Tornado 98778 and 98780
  • Powr-Flite PD350, PD500, PDH1 and PDH2 carpet dryers
  • and other Tornado and Powr-Flite air-mover, dryer and extractor models — call 763-535-0770 to confirm

Frequently Asked Questions

What does the screw #6 x 1/2 in pan head Phillips (part# X8261) do?

It is the general-purpose panel fastener on these machines. On the Windshear SD3500 air mover it holds the moulded plastic panels and the control-panel cover against the housing; on the extractors it secures covers, brackets and trim. It threads directly into a plastic boss rather than into a nut.

How do I know if my X8261 screw needs replacing?

Look at the head and the threads. If a Phillips bit slips because the head is stripped, if the screw spins without tightening, or if rust has broken through the black finish, replace it. A rattling or loose panel on an air mover is often nothing more than a missing or stripped X8261.

What models is the screw #6 x 1/2 in pan head Phillips (part# X8261) compatible with?

It fits the Tornado Windshear SD3500 Model 98776 (and the 98777 230V export version), Tornado 98778 and 98780, and the Powr-Flite PD350, PD500, PDH1 and PDH2 carpet dryers, along with a number of Tornado and Powr-Flite extractors. Call 763-535-0770 to confirm your machine.

How do I order the screw #6 x 1/2 in pan head Phillips (part# X8261) or get help?

You can add the screw #6 x 1/2 in pan head Phillips (part# X8261) directly to your cart on this page, or call us at 763-535-0770.

You can add this part directly to your cart on this page, or call us at 763-535-0770.

Reviews

There are no reviews yet

Be the first to review “Screw, #6 x 1/2 in, Pan Head Phillips X8261”

Your email address will not be published. Required fields are marked *