Screw M5 x 12 60110502
$1.99
Genuine OEM screw m5 x 12 (part# 60110502) used across a wide range of Tornado floor scrubbers, including the BDSO 20/21 central frame. Confirmed on 7 machines – the full list is shown below.
This screw m5 x 12 (part# 60110502) is a genuine OEM component used across a wide range of Tornado floor scrubbers, including the central frame of the BDSO 20/21 stand-on machine. A short M5 screw used where light panels and brackets are fixed to the central frame rather than where structural load is carried.
Small fasteners and washers are the items most often reused past their useful life. They are disturbed at every service, they live in an area that gets wet with cleaning solution, and they carry vibration continuously. A lock washer that has lost its spring no longer does anything, and a screw whose drive has burred cannot be pulled to the right torque. Either way the joint is not clamped, and an unclamped joint wears the parts it was supposed to hold.
Order by part number rather than matching by eye – several similar sizes appear across this machine, and the wrong one either leaves too little thread engaged or sits proud and stops the joint pulling down. Because this item is confirmed on 7 Tornado machines in the factory book, it is worth keeping a few on the shelf if you run more than one of these.
Compatible Models
- Tornado BDSO 20/21 Stand-On Scrubber – TS120-S59-UC, UG and UE
- Tornado 99685 18" BR 18/11
- Tornado 99760 BD 26/30
- Tornado 99780 BD 33/30
- Tornado 99680 20" BD 20/11
- Tornado 99695 BR 22/14
- Tornado 99695T BR 22/14T
That is the complete list from the factory book. Call 763-535-0770 with your model and serial number. Twin City Vacuum, 5415 West Broadway, Crystal, MN 55428, since 1956.
Screw M5 x 12 FAQ
Which machines does the screw m5 x 12 (part# 60110502) fit?
The factory parts book lists it on 7 Tornado machines, including the BDSO 20/21 stand-on scrubber and the BD and BR series models shown above.
When should the screw m5 x 12 (part# 60110502) be replaced?
Any time the joint it sits in is disturbed. A lock washer that has lost its spring or a screw with a burred drive or damaged thread should not be refitted.
Can I substitute a hardware-store equivalent?
We do not recommend it. These are OEM parts specified for the material and the wet environment they work in, and a mismatched grade or finish is the one that fails at the next service.
How do I order the screw m5 x 12 (part# 60110502) or get help?
You can add it directly to your cart on this page, or call us at 763-535-0770. Our staff at 5415 West Broadway, Crystal, MN 55428 has been servicing Tornado equipment since 1956 and can help confirm the right part for your machine.
{“@context”:”https://schema.org”,”@type”:”FAQPage”,”mainEntity”:[{“@type”:”Question”,”name”:”Which machines does the screw m5 x 12 (part# 60110502) fit?”,”acceptedAnswer”:{“@type”:”Answer”,”text”:”The factory parts book lists it on 7 Tornado machines, including the BDSO 20/21 stand-on scrubber and the BD and BR series models shown above.”}},{“@type”:”Question”,”name”:”When should the screw m5 x 12 (part# 60110502) be replaced?”,”acceptedAnswer”:{“@type”:”Answer”,”text”:”Any time the joint it sits in is disturbed. A lock washer that has lost its spring or a screw with a burred drive or damaged thread should not be refitted.”}},{“@type”:”Question”,”name”:”Can I substitute a hardware-store equivalent?”,”acceptedAnswer”:{“@type”:”Answer”,”text”:”We do not recommend it. These are OEM parts specified for the material and the wet environment they work in, and a mismatched grade or finish is the one that fails at the next service.”}},{“@type”:”Question”,”name”:”How do I order the screw m5 x 12 (part# 60110502) or get help?”,”acceptedAnswer”:{“@type”:”Answer”,”text”:”You can add it directly to your cart on this page, or call us at 763-535-0770. Our staff at 5415 West Broadway, Crystal, MN 55428 has been servicing Tornado equipment since 1956 and can help confirm the right part for your machine.”}}]}






Reviews
There are no reviews yet