Screw M6 x 8 Stainless 60110610

$1.99

Genuine OEM M6 x 8 screw (part# 60110610) used across a wide range of Tornado floor scrubbers, including the BDSO 20/21 stand-on drive wheel assembly. Confirmed on 20 machines in the factory parts book.

This M6 x 8 screw (part# 60110610) is a genuine OEM fastener used across a wide range of Tornado floor scrubbers, including the drive wheel assembly of the BDSO 20/21 stand-on machine. At only 8 mm long this is a short clamping screw, used where a part is held against a face rather than through a thick section – which also means there is very little thread engagement to spare if the wrong length is fitted.

Fasteners are the parts most often reused when they should not be. They are loosened and retightened every time an assembly is serviced, they spend their lives in an area that gets wet with cleaning solution, and they carry vibration continuously. Replace any screw with a stretched shank, a rounded or burred drive, corrosion in the threads, or damage from cross-starting. A fastener that will not pull up to the correct torque is not clamping its joint, no matter how tight it feels on the wrench, and a joint that is not clamped works loose and wears the parts it was meant to hold.

Order by part number rather than by eye. The same thread size appears in several lengths across these machines, and fitting a screw that is too short leaves too few threads engaged while one that is too long bottoms out before it clamps. Check the mating thread in the casting while the fastener is out, and replace any screw you had to force in either direction. Because it is confirmed on 20 Tornado machines in the parts book, this is a sensible item to stock if you run a mixed fleet.

Compatible Models

  • Tornado BDSO 20/21 Stand-On Scrubber – TS120-S59-UC, UG and UE
  • Tornado 99685 18" BR 18/11
  • Tornado 99690 BD 22/14
  • Tornado 99726 BD 26/26
  • Tornado 99760 BD 26/30
  • Tornado 99770 BD 26/27
  • Tornado 99780 BD 33/30
  • Tornado 99680 20" BD 20/11
  • Tornado 99695 BR 22/14
  • Tornado 99765 BR 28/30
  • Tornado 99785 BR 33/30

The factory book lists this screw on 20 machines in total; the models above are the ones we have confirmed directly. Call 763-535-0770 with your model and serial number and we will check yours against the book. Twin City Vacuum, 5415 West Broadway, Crystal, MN 55428, since 1956.

Screw M6 x 8 Stainless FAQ

Which machines does the M6 x 8 screw (part# 60110610) fit?
The factory parts book lists it on 20 Tornado machines. The confirmed list on this page includes the BDSO 20/21 stand-on scrubber and the BD and BR series models shown above.

Can I substitute a hardware-store screw of the same size?
We do not recommend it. These are OEM fasteners specified for the material and the environment they work in, and a mismatched grade or finish is the part that fails next time the assembly is serviced.

When should the M6 x 8 screw (part# 60110610) be replaced?
Replace it if the shank has stretched, the drive is rounded or burred, the threads are corroded or damaged, or it had to be forced in either direction.

How do I order the M6 x 8 screw (part# 60110610) or get help?
You can add the M6 x 8 screw (part# 60110610) directly to your cart on this page, or call us at 763-535-0770. Our staff at 5415 West Broadway, Crystal, MN 55428 has been servicing Tornado equipment since 1956 and can help confirm the right part for your machine.

{“@context”:”https://schema.org”,”@type”:”FAQPage”,”mainEntity”:[{“@type”:”Question”,”name”:”Which machines does the M6 x 8 screw (part# 60110610) fit?”,”acceptedAnswer”:{“@type”:”Answer”,”text”:”The factory parts book lists it on 20 Tornado machines. The confirmed list on this page includes the BDSO 20/21 stand-on scrubber and the BD and BR series models shown above.”}},{“@type”:”Question”,”name”:”Can I substitute a hardware-store screw of the same size?”,”acceptedAnswer”:{“@type”:”Answer”,”text”:”We do not recommend it. These are OEM fasteners specified for the material and the environment they work in, and a mismatched grade or finish is the part that fails next time the assembly is serviced.”}},{“@type”:”Question”,”name”:”When should the M6 x 8 screw (part# 60110610) be replaced?”,”acceptedAnswer”:{“@type”:”Answer”,”text”:”Replace it if the shank has stretched, the drive is rounded or burred, the threads are corroded or damaged, or it had to be forced in either direction.”}},{“@type”:”Question”,”name”:”How do I order the M6 x 8 screw (part# 60110610) or get help?”,”acceptedAnswer”:{“@type”:”Answer”,”text”:”You can add the M6 x 8 screw (part# 60110610) directly to your cart on this page, or call us at 763-535-0770. Our staff at 5415 West Broadway, Crystal, MN 55428 has been servicing Tornado equipment since 1956 and can help confirm the right part for your machine.”}}]}

Reviews

There are no reviews yet

Be the first to review “Screw M6 x 8 Stainless 60110610”

Your email address will not be published. Required fields are marked *