Steering Column Shaft 21709030
$158.99
Genuine OEM steering column shaft (part# 21709030) for Tornado stand-on scrubbers – fits the BDSO 20/21 (TS120-S59-UC, UG and UE) and the TS560-W28-U. The shaft that carries steering input down to the drive wheel.
The steering column shaft (part# 21709030) is the shaft that runs down the centre of the steering column on Tornado stand-on scrubbers, carrying the operator’s input from the wheel at the top to the crown gear and drive wheel at the bottom. It turns in the column frame, takes the side load of a machine being steered under power, and holds the relationship between where the wheel is pointed and where the machine actually goes.
Shafts in this position fail from wear at the bearing surfaces and from impact. A worn shaft shows up as free play at the steering wheel that no amount of gear adjustment removes: the operator turns the wheel an inch or two before the machine responds, and the slack grows as the bearing surfaces polish undersize. A bent shaft – usually the result of the machine being dropped off a dock edge or the wheel being wrenched while the machine was wedged – gives a steering wheel that feels tight at one point in its rotation and loose at another, and in bad cases you can see the wheel orbit slightly as it turns.
Inspect the column frame (part# 46117200) and the crown gear at the same time, because a shaft that has been running with play has been loading both. Fit the new shaft, check that it turns freely through the full lock without tight spots, and confirm the steering has no detectable free play at the rim before returning the machine to service.
Compatible Models
- Tornado BDSO 20/21 Stand-On Scrubber – TS120-S59-UC, TS120-S59-UG and TS120-S59-UE
- Tornado TS560-W28-U
Call 763-535-0770 with your model and serial number and we will confirm the shaft against the factory book. Twin City Vacuum, 5415 West Broadway, Crystal, MN 55428, since 1956.
Steering Column Shaft FAQ
What does the steering column shaft do?
It carries steering input from the wheel at the top of the column down to the crown gear and drive wheel, turning in the column frame under the side load of a machine being steered under power.
How do I know if the steering column shaft (part# 21709030) needs replacing?
Free play at the wheel that gear adjustment will not remove, a wheel that feels tight at one point in its rotation and loose at another, or a visible orbit at the rim as it turns.
What models is the steering column shaft (part# 21709030) compatible with?
The Tornado BDSO 20/21 stand-on scrubber (TS120-S59-UC, UG and UE) and the Tornado TS560-W28-U.
How do I order the steering column shaft (part# 21709030) or get help?
You can add the steering column shaft (part# 21709030) directly to your cart on this page, or call us at 763-535-0770. Our staff at 5415 West Broadway, Crystal, MN 55428 has been servicing Tornado equipment since 1956 and can help confirm the right part for your machine.
{“@context”:”https://schema.org”,”@type”:”FAQPage”,”mainEntity”:[{“@type”:”Question”,”name”:”What does the steering column shaft do?”,”acceptedAnswer”:{“@type”:”Answer”,”text”:”It carries steering input from the wheel at the top of the column down to the crown gear and drive wheel, turning in the column frame under the side load of a machine being steered under power.”}},{“@type”:”Question”,”name”:”How do I know if the steering column shaft (part# 21709030) needs replacing?”,”acceptedAnswer”:{“@type”:”Answer”,”text”:”Free play at the wheel that gear adjustment will not remove, a wheel that feels tight at one point in its rotation and loose at another, or a visible orbit at the rim as it turns.”}},{“@type”:”Question”,”name”:”What models is the steering column shaft (part# 21709030) compatible with?”,”acceptedAnswer”:{“@type”:”Answer”,”text”:”The Tornado BDSO 20/21 stand-on scrubber (TS120-S59-UC, UG and UE) and the Tornado TS560-W28-U.”}},{“@type”:”Question”,”name”:”How do I order the steering column shaft (part# 21709030) or get help?”,”acceptedAnswer”:{“@type”:”Answer”,”text”:”You can add the steering column shaft (part# 21709030) directly to your cart on this page, or call us at 763-535-0770. Our staff at 5415 West Broadway, Crystal, MN 55428 has been servicing Tornado equipment since 1956 and can help confirm the right part for your machine.”}}]}






Reviews
There are no reviews yet