Tornado BDSO 20/21 Brush Cover Mount Plate 21705010

$148.99

Genuine brush cover mount plate (part# 21705010) for the Tornado BDSO 20/21 stand-on scrubber – the 20-inch plate the brush cover and guards mount to. Fits TS120-S59-UC, UG and UE.

The brush cover mount plate (part# 21705010) is the structural plate that the moulded brush cover and its splash guards fasten to on the Tornado BDSO 20/21 stand-on scrubber. It spans the top of the 20-inch deck, carries the fixing points for the cover and guard hardware, and ties the cover assembly back to the brush base so that the whole shroud moves as one piece when the deck is raised and lowered.

Because it is the part that takes the load whenever the cover is struck, this plate shows damage in the fixings first. Elongated or pulled fastener holes are the classic sign: the cover starts to shift slightly under impact, then develops a rattle, and the splash guards stop holding an even line against the floor. On machines that have been run with a loose cover you will also see fretting marks around each boss and, in the worst cases, a cracked or distorted plate that will no longer pull the cover down flat. Anything that lets the cover move relative to the base eventually lets slurry out of the deck, so a rattling cover is a containment problem and not just a noise.

When you fit a new plate, start all fasteners loosely and tighten in a cross pattern so the cover seats evenly, then check the splash guard contact along the full width before the machine goes back to work. Inspect the cover (part# 21702020) and the guard blades while the assembly is apart – new hardware against a cracked cover is a short-lived repair.

Compatible Models

  • Tornado BDSO 20/21 Stand-On Scrubber – TS120-S59-UC (lead acid)
  • Tornado BDSO 20/21 Stand-On Scrubber – TS120-S59-UG (AGM)
  • Tornado BDSO 20/21 Stand-On Scrubber – TS120-S59-UE (TPPL)

Call 763-535-0770 with your serial number and we will confirm the plate and cover together. Twin City Vacuum, 5415 West Broadway, Crystal, MN 55428, since 1956.

Tornado BDSO 20/21 Brush Cover Mount Plate FAQ

What does the brush cover mount plate do on the Tornado BDSO 20/21?
It is the structural plate the brush cover and splash guards fasten to, tying the shroud back to the brush base so the whole cover assembly moves as one piece.

How do I know if the brush cover mount plate (part# 21705010) needs replacing?
Elongated or pulled fastener holes, a cover that rattles or shifts under impact, fretting marks around the bosses, or a distorted plate that will not pull the cover down flat.

What models is the brush cover mount plate (part# 21705010) compatible with?
The Tornado BDSO 20/21 stand-on scrubber in all three battery configurations – TS120-S59-UC, TS120-S59-UG and TS120-S59-UE.

How do I order the brush cover mount plate (part# 21705010) or get help?
You can add the brush cover mount plate (part# 21705010) directly to your cart on this page, or call us at 763-535-0770. Our staff at 5415 West Broadway, Crystal, MN 55428 has been servicing Tornado equipment since 1956 and can help confirm the right part for your machine.

{“@context”:”https://schema.org”,”@type”:”FAQPage”,”mainEntity”:[{“@type”:”Question”,”name”:”What does the brush cover mount plate do on the Tornado BDSO 20/21?”,”acceptedAnswer”:{“@type”:”Answer”,”text”:”It is the structural plate the brush cover and splash guards fasten to, tying the shroud back to the brush base so the whole cover assembly moves as one piece.”}},{“@type”:”Question”,”name”:”How do I know if the brush cover mount plate (part# 21705010) needs replacing?”,”acceptedAnswer”:{“@type”:”Answer”,”text”:”Elongated or pulled fastener holes, a cover that rattles or shifts under impact, fretting marks around the bosses, or a distorted plate that will not pull the cover down flat.”}},{“@type”:”Question”,”name”:”What models is the brush cover mount plate (part# 21705010) compatible with?”,”acceptedAnswer”:{“@type”:”Answer”,”text”:”The Tornado BDSO 20/21 stand-on scrubber in all three battery configurations – TS120-S59-UC, TS120-S59-UG and TS120-S59-UE.”}},{“@type”:”Question”,”name”:”How do I order the brush cover mount plate (part# 21705010) or get help?”,”acceptedAnswer”:{“@type”:”Answer”,”text”:”You can add the brush cover mount plate (part# 21705010) directly to your cart on this page, or call us at 763-535-0770. Our staff at 5415 West Broadway, Crystal, MN 55428 has been servicing Tornado equipment since 1956 and can help confirm the right part for your machine.”}}]}

Reviews

There are no reviews yet

Be the first to review “Tornado BDSO 20/21 Brush Cover Mount Plate 21705010”

Your email address will not be published. Required fields are marked *