Tornado BDSO 20/21 Chain Tightener Adjuster 21707030
$29.99
Genuine chain tightener adjuster (part# 21707030) for the Tornado BDSO 20/21 stand-on scrubber – the threaded adjuster that sets traction chain tension. Fits TS120-S59-UC, UG and UE.
The chain tightener adjuster (part# 21707030) sets and holds the tension in the traction chain on the Tornado BDSO 20/21 stand-on scrubber. It positions the idler against the chain run and locks there, taking up the slack that develops as the chain beds in and stretches over its life. A correctly adjusted chain has a small amount of free movement at its tightest point; the adjuster is what lets you dial that in and keep it.
Adjusters fail in two ways. The thread strips or seizes, usually from corrosion where solution has found its way into the drive area, so the adjustment either will not move or will not hold. Or the locking arrangement loses its grip and the adjuster backs off under vibration, which shows up as chain tension that is correct after a service and slack again a week later. Either way the result is the same: a chain that climbs the sprockets, clicks under load, and chews teeth.
If you are winding this adjuster near the end of its travel to keep tension, the chain has stretched and needs replacing (part# 61510007) rather than more adjustment – an adjuster at full extension is a symptom, not a fix. Inspect the idler bushing (part# 21707020) while you are in there, since a worn bushing lets the idler wander and makes correct tension impossible to hold.
Compatible Models
- Tornado BDSO 20/21 Stand-On Scrubber – TS120-S59-UC (lead acid)
- Tornado BDSO 20/21 Stand-On Scrubber – TS120-S59-UG (AGM)
- Tornado BDSO 20/21 Stand-On Scrubber – TS120-S59-UE (TPPL)
Call 763-535-0770 with your serial number for help setting chain tension correctly. Twin City Vacuum, 5415 West Broadway, Crystal, MN 55428, since 1956.
Tornado BDSO 20/21 Chain Tightener Adjuster FAQ
What does the chain tightener adjuster do on the Tornado BDSO 20/21?
It positions the idler against the traction chain and locks there, setting and holding the chain tension as the chain beds in and stretches.
How do I know if the chain tightener adjuster (part# 21707030) needs replacing?
A thread that is seized or stripped so adjustment will not move or will not hold, or tension that is correct after a service and slack again a week later because the adjuster backs off under vibration.
What models is the chain tightener adjuster (part# 21707030) compatible with?
The Tornado BDSO 20/21 stand-on scrubber in all three battery configurations – TS120-S59-UC, TS120-S59-UG and TS120-S59-UE.
How do I order the chain tightener adjuster (part# 21707030) or get help?
You can add the chain tightener adjuster (part# 21707030) directly to your cart on this page, or call us at 763-535-0770. Our staff at 5415 West Broadway, Crystal, MN 55428 has been servicing Tornado equipment since 1956 and can help confirm the right part for your machine.
{“@context”:”https://schema.org”,”@type”:”FAQPage”,”mainEntity”:[{“@type”:”Question”,”name”:”What does the chain tightener adjuster do on the Tornado BDSO 20/21?”,”acceptedAnswer”:{“@type”:”Answer”,”text”:”It positions the idler against the traction chain and locks there, setting and holding the chain tension as the chain beds in and stretches.”}},{“@type”:”Question”,”name”:”How do I know if the chain tightener adjuster (part# 21707030) needs replacing?”,”acceptedAnswer”:{“@type”:”Answer”,”text”:”A thread that is seized or stripped so adjustment will not move or will not hold, or tension that is correct after a service and slack again a week later because the adjuster backs off under vibration.”}},{“@type”:”Question”,”name”:”What models is the chain tightener adjuster (part# 21707030) compatible with?”,”acceptedAnswer”:{“@type”:”Answer”,”text”:”The Tornado BDSO 20/21 stand-on scrubber in all three battery configurations – TS120-S59-UC, TS120-S59-UG and TS120-S59-UE.”}},{“@type”:”Question”,”name”:”How do I order the chain tightener adjuster (part# 21707030) or get help?”,”acceptedAnswer”:{“@type”:”Answer”,”text”:”You can add the chain tightener adjuster (part# 21707030) directly to your cart on this page, or call us at 763-535-0770. Our staff at 5415 West Broadway, Crystal, MN 55428 has been servicing Tornado equipment since 1956 and can help confirm the right part for your machine.”}}]}






Reviews
There are no reviews yet