Tornado BDSO 20/21 Drive Microswitch Support 21707050

$19.99

Genuine microswitch support bracket (part# 21707050) for the Tornado BDSO 20/21 stand-on scrubber – the bracket that holds the drive microswitch at its actuation point. Fits TS120-S59-UC, UG and UE.

The drive microswitch support (part# 21707050) is the small bracket that holds the traction microswitch in position beside the drive motor on the Tornado BDSO 20/21 stand-on scrubber. Its only job is to keep the switch at exactly the right height and angle relative to the drive control linkage, so the switch actuates at the correct point in the control travel and releases fully when the control returns.

That makes it a part whose failure looks like an electrical fault. A bent bracket moves the switch a few millimetres, and the machine either will not pick up drive at all – the linkage no longer reaches the switch – or picks up drive too early and feels twitchy. A cracked or loose bracket lets the switch move under vibration, giving intermittent travel that comes and goes over bumps. Before replacing a switch that tests good, check whether this bracket is straight, whether its fasteners are tight, and whether the switch is sitting where the linkage expects to find it.

Fit a new bracket with the switch loosely attached, set the actuation point against the control linkage, then tighten. Replace the microswitch (part# 63409012) at the same time if it has been operating against a misaligned bracket, since the plunger will have been taking side load it was never meant to carry.

Compatible Models

  • Tornado BDSO 20/21 Stand-On Scrubber – TS120-S59-UC (lead acid)
  • Tornado BDSO 20/21 Stand-On Scrubber – TS120-S59-UG (AGM)
  • Tornado BDSO 20/21 Stand-On Scrubber – TS120-S59-UE (TPPL)

Call 763-535-0770 with your serial number for help setting the switch position. Twin City Vacuum, 5415 West Broadway, Crystal, MN 55428, since 1956.

Tornado BDSO 20/21 Drive Microswitch Support FAQ

What does the drive microswitch support do on the Tornado BDSO 20/21?
It holds the traction microswitch at the exact height and angle the drive control linkage expects, so the switch actuates and releases at the right points in the control travel.

How do I know if the drive microswitch support (part# 21707050) needs replacing?
A machine that will not pick up drive or picks it up too early, intermittent travel over bumps, or a bracket that is visibly bent, cracked or loose on its fasteners.

What models is the drive microswitch support (part# 21707050) compatible with?
The Tornado BDSO 20/21 stand-on scrubber in all three battery configurations – TS120-S59-UC, TS120-S59-UG and TS120-S59-UE.

How do I order the drive microswitch support (part# 21707050) or get help?
You can add the drive microswitch support (part# 21707050) directly to your cart on this page, or call us at 763-535-0770. Our staff at 5415 West Broadway, Crystal, MN 55428 has been servicing Tornado equipment since 1956 and can help confirm the right part for your machine.

{“@context”:”https://schema.org”,”@type”:”FAQPage”,”mainEntity”:[{“@type”:”Question”,”name”:”What does the drive microswitch support do on the Tornado BDSO 20/21?”,”acceptedAnswer”:{“@type”:”Answer”,”text”:”It holds the traction microswitch at the exact height and angle the drive control linkage expects, so the switch actuates and releases at the right points in the control travel.”}},{“@type”:”Question”,”name”:”How do I know if the drive microswitch support (part# 21707050) needs replacing?”,”acceptedAnswer”:{“@type”:”Answer”,”text”:”A machine that will not pick up drive or picks it up too early, intermittent travel over bumps, or a bracket that is visibly bent, cracked or loose on its fasteners.”}},{“@type”:”Question”,”name”:”What models is the drive microswitch support (part# 21707050) compatible with?”,”acceptedAnswer”:{“@type”:”Answer”,”text”:”The Tornado BDSO 20/21 stand-on scrubber in all three battery configurations – TS120-S59-UC, TS120-S59-UG and TS120-S59-UE.”}},{“@type”:”Question”,”name”:”How do I order the drive microswitch support (part# 21707050) or get help?”,”acceptedAnswer”:{“@type”:”Answer”,”text”:”You can add the drive microswitch support (part# 21707050) directly to your cart on this page, or call us at 763-535-0770. Our staff at 5415 West Broadway, Crystal, MN 55428 has been servicing Tornado equipment since 1956 and can help confirm the right part for your machine.”}}]}

Reviews

There are no reviews yet

Be the first to review “Tornado BDSO 20/21 Drive Microswitch Support 21707050”

Your email address will not be published. Required fields are marked *