Tornado BDSO 20/21 Drive Wheel Support 21709010
$689.99
Genuine drive wheel support (part# 21709010) for the Tornado BDSO 20/21 stand-on scrubber – the fabricated housing that carries the drive wheel, its bearings and the steering pivot. Fits TS120-S59-UC, UG and UE.
The drive wheel support (part# 21709010) is the fabricated housing that carries the drive wheel on the Tornado BDSO 20/21 stand-on scrubber. The wheel shaft runs in bearings mounted to it, the lower sprocket sits inboard of it, and the whole assembly pivots on it when the operator steers. It is the single structural part connecting the machine to the floor at the drive end, which is why it is also the part that takes every kerb, dock plate and pallet leg the machine ever meets.
Most supports are replaced after impact rather than wear. Look for a wheel that no longer sits square to the frame, a machine that pulls steadily to one side on a straight run, steering that binds at one point in its arc, or visible cracking around the bearing bores or the pivot. A support that has been run with failed bearings will show an ovalled bore and a polished witness mark – at that point the bearings will not stay seated and replacing them alone simply repeats the failure a few weeks later.
Fit the support with new bearing hardware and check the chain line before tightening everything down: the lower sprocket must run true with the upper one or the chain will climb and wear the teeth on both. Renew the bearing support (part# 61442001) and inspect the drive wheel pin (part# 21707010) while the assembly is apart, then turn the wheel through its full steering arc by hand to confirm nothing binds.
Compatible Models
- Tornado BDSO 20/21 Stand-On Scrubber – TS120-S59-UC (lead acid)
- Tornado BDSO 20/21 Stand-On Scrubber – TS120-S59-UG (AGM)
- Tornado BDSO 20/21 Stand-On Scrubber – TS120-S59-UE (TPPL)
This is a major structural part – call 763-535-0770 with your serial number and we will confirm it against the factory book before you order. Twin City Vacuum, 5415 West Broadway, Crystal, MN 55428, since 1956.
Tornado BDSO 20/21 Drive Wheel Support FAQ
What does the drive wheel support do on the Tornado BDSO 20/21?
It is the housing that carries the drive wheel and its bearings, holds the lower sprocket in line with the chain, and provides the pivot the machine steers on.
How do I know if the drive wheel support (part# 21709010) needs replacing?
A wheel that no longer sits square, a machine pulling steadily to one side, steering that binds at one point in its arc, cracks around the bearing bores or pivot, or an ovalled bore that will not hold bearings.
What models is the drive wheel support (part# 21709010) compatible with?
The Tornado BDSO 20/21 stand-on scrubber in all three battery configurations – TS120-S59-UC, TS120-S59-UG and TS120-S59-UE.
How do I order the drive wheel support (part# 21709010) or get help?
You can add the drive wheel support (part# 21709010) directly to your cart on this page, or call us at 763-535-0770. Our staff at 5415 West Broadway, Crystal, MN 55428 has been servicing Tornado equipment since 1956 and can help confirm the right part for your machine.
{“@context”:”https://schema.org”,”@type”:”FAQPage”,”mainEntity”:[{“@type”:”Question”,”name”:”What does the drive wheel support do on the Tornado BDSO 20/21?”,”acceptedAnswer”:{“@type”:”Answer”,”text”:”It is the housing that carries the drive wheel and its bearings, holds the lower sprocket in line with the chain, and provides the pivot the machine steers on.”}},{“@type”:”Question”,”name”:”How do I know if the drive wheel support (part# 21709010) needs replacing?”,”acceptedAnswer”:{“@type”:”Answer”,”text”:”A wheel that no longer sits square, a machine pulling steadily to one side, steering that binds at one point in its arc, cracks around the bearing bores or pivot, or an ovalled bore that will not hold bearings.”}},{“@type”:”Question”,”name”:”What models is the drive wheel support (part# 21709010) compatible with?”,”acceptedAnswer”:{“@type”:”Answer”,”text”:”The Tornado BDSO 20/21 stand-on scrubber in all three battery configurations – TS120-S59-UC, TS120-S59-UG and TS120-S59-UE.”}},{“@type”:”Question”,”name”:”How do I order the drive wheel support (part# 21709010) or get help?”,”acceptedAnswer”:{“@type”:”Answer”,”text”:”You can add the drive wheel support (part# 21709010) directly to your cart on this page, or call us at 763-535-0770. Our staff at 5415 West Broadway, Crystal, MN 55428 has been servicing Tornado equipment since 1956 and can help confirm the right part for your machine.”}}]}






Reviews
There are no reviews yet