Tornado BDSO 20/21 Screw M5 x 20 Stainless 60130503

$1.99

Genuine M5 x 20 stainless (INOX) screw (part# 60130503) for the Tornado BDSO 20/21 stand-on scrubber drive wheel assembly. Fits TS120-S59-UC, UG and UE.

This M5 x 20 stainless screw (part# 60130503) is one of the smaller fasteners in the drive wheel assembly of the Tornado BDSO 20/21 stand-on scrubber. The INOX specification matters here: this is a wet machine, and a plated steel screw in the same position corrodes, seizes in its thread and then shears or rounds off when someone finally tries to remove it.

Small stainless fasteners have a particular failure mode worth knowing about. Stainless is softer than the plated steel most technicians are used to, so the drive recess burrs easily if the wrong size driver is used, and the thread will gall and seize if the screw is run in fast and dry against a stainless or aluminium mating thread. Once galled, the screw usually has to be drilled out. Replace any screw whose recess is rounded, whose thread shows galling marks, or that had to be forced in either direction.

Fit it with a correctly sized driver, start it by hand to be certain the thread has picked up square, and do not substitute a plated steel screw of the same size – it will be the part that fails next time the assembly comes apart. If you are working through the drive area, replace the small fasteners as a set rather than reusing them one by one.

Compatible Models

  • Tornado BDSO 20/21 Stand-On Scrubber – TS120-S59-UC (lead acid)
  • Tornado BDSO 20/21 Stand-On Scrubber – TS120-S59-UG (AGM)
  • Tornado BDSO 20/21 Stand-On Scrubber – TS120-S59-UE (TPPL)

Call 763-535-0770 if you want the small-fastener set for this assembly. Twin City Vacuum, 5415 West Broadway, Crystal, MN 55428, since 1956.

Tornado BDSO 20/21 Screw M5 x 20 Stainless FAQ

Why is the M5 x 20 screw stainless rather than plated steel?
Because this is a wet machine. A plated steel screw in the same position corrodes, seizes in its thread, and then shears or rounds off when it is removed. Do not substitute one.

When should the M5 x 20 stainless screw (part# 60130503) be replaced?
If the drive recess is rounded or burred, if the thread shows galling marks, or if it had to be forced in either direction. Galled stainless usually has to be drilled out, so replace early.

What models is the M5 x 20 stainless screw (part# 60130503) compatible with?
The Tornado BDSO 20/21 stand-on scrubber in all three battery configurations – TS120-S59-UC, TS120-S59-UG and TS120-S59-UE.

How do I order the M5 x 20 stainless screw (part# 60130503) or get help?
You can add the M5 x 20 stainless screw (part# 60130503) directly to your cart on this page, or call us at 763-535-0770. Our staff at 5415 West Broadway, Crystal, MN 55428 has been servicing Tornado equipment since 1956 and can help confirm the right part for your machine.

{“@context”:”https://schema.org”,”@type”:”FAQPage”,”mainEntity”:[{“@type”:”Question”,”name”:”Why is the M5 x 20 screw stainless rather than plated steel?”,”acceptedAnswer”:{“@type”:”Answer”,”text”:”Because this is a wet machine. A plated steel screw in the same position corrodes, seizes in its thread, and then shears or rounds off when it is removed. Do not substitute one.”}},{“@type”:”Question”,”name”:”When should the M5 x 20 stainless screw (part# 60130503) be replaced?”,”acceptedAnswer”:{“@type”:”Answer”,”text”:”If the drive recess is rounded or burred, if the thread shows galling marks, or if it had to be forced in either direction. Galled stainless usually has to be drilled out, so replace early.”}},{“@type”:”Question”,”name”:”What models is the M5 x 20 stainless screw (part# 60130503) compatible with?”,”acceptedAnswer”:{“@type”:”Answer”,”text”:”The Tornado BDSO 20/21 stand-on scrubber in all three battery configurations – TS120-S59-UC, TS120-S59-UG and TS120-S59-UE.”}},{“@type”:”Question”,”name”:”How do I order the M5 x 20 stainless screw (part# 60130503) or get help?”,”acceptedAnswer”:{“@type”:”Answer”,”text”:”You can add the M5 x 20 stainless screw (part# 60130503) directly to your cart on this page, or call us at 763-535-0770. Our staff at 5415 West Broadway, Crystal, MN 55428 has been servicing Tornado equipment since 1956 and can help confirm the right part for your machine.”}}]}

Reviews

There are no reviews yet

Be the first to review “Tornado BDSO 20/21 Screw M5 x 20 Stainless 60130503”

Your email address will not be published. Required fields are marked *