Tornado BDSO 20/21 Screw M8 x 22 60110814
$1.99
Genuine M8 x 22 hex screw (part# 60110814) for the Tornado BDSO 20/21 stand-on scrubber drive wheel assembly. Fits TS120-S59-UC, UG and UE.
This M8 x 22 hex head screw (part# 60110814) is one of the structural fasteners in the drive wheel assembly of the Tornado BDSO 20/21 stand-on scrubber. M8 is the larger of the thread sizes used in this area, which places it where real load is carried rather than where a cover or a bracket is simply held in place.
Fasteners in a drive assembly do not get replaced often enough. They are repeatedly loosened and retightened during chain and sprocket work, they live in an area that gets wet with cleaning solution, and they carry vibration every hour the machine runs. A screw with a stretched shank, a rounded or burred head, corrosion in the threads, or any thread damage from cross-starting should be replaced rather than refitted – a fastener that will not pull to the correct torque is not holding the joint, whatever the wrench says.
Use the correct length: an M8 x 22 in a position designed for a longer screw leaves too few threads engaged, and one that is too long bottoms out before it clamps. Check the mating threads in the casting at the same time, and replace any screw you had to force out. Keeping a few of these on the shelf saves pulling a machine out of service for a fastener.
Compatible Models
- Tornado BDSO 20/21 Stand-On Scrubber – TS120-S59-UC (lead acid)
- Tornado BDSO 20/21 Stand-On Scrubber – TS120-S59-UG (AGM)
- Tornado BDSO 20/21 Stand-On Scrubber – TS120-S59-UE (TPPL)
Call 763-535-0770 with your serial number if you need the full fastener set for this assembly. Twin City Vacuum, 5415 West Broadway, Crystal, MN 55428, since 1956.
Tornado BDSO 20/21 Screw M8 x 22 FAQ
Where is the M8 x 22 screw used on the Tornado BDSO 20/21?
It is one of the structural fasteners in the drive wheel assembly, in a position that carries real load rather than simply retaining a cover or bracket.
When should the M8 x 22 screw (part# 60110814) be replaced?
Replace it if the shank has stretched, the head is rounded or burred, the threads are corroded or damaged, or it had to be forced out. A fastener that will not pull to correct torque is not holding the joint.
What models is the M8 x 22 screw (part# 60110814) compatible with?
The Tornado BDSO 20/21 stand-on scrubber in all three battery configurations – TS120-S59-UC, TS120-S59-UG and TS120-S59-UE.
How do I order the M8 x 22 screw (part# 60110814) or get help?
You can add the M8 x 22 screw (part# 60110814) directly to your cart on this page, or call us at 763-535-0770. Our staff at 5415 West Broadway, Crystal, MN 55428 has been servicing Tornado equipment since 1956 and can help confirm the right part for your machine.
{“@context”:”https://schema.org”,”@type”:”FAQPage”,”mainEntity”:[{“@type”:”Question”,”name”:”Where is the M8 x 22 screw used on the Tornado BDSO 20/21?”,”acceptedAnswer”:{“@type”:”Answer”,”text”:”It is one of the structural fasteners in the drive wheel assembly, in a position that carries real load rather than simply retaining a cover or bracket.”}},{“@type”:”Question”,”name”:”When should the M8 x 22 screw (part# 60110814) be replaced?”,”acceptedAnswer”:{“@type”:”Answer”,”text”:”Replace it if the shank has stretched, the head is rounded or burred, the threads are corroded or damaged, or it had to be forced out. A fastener that will not pull to correct torque is not holding the joint.”}},{“@type”:”Question”,”name”:”What models is the M8 x 22 screw (part# 60110814) compatible with?”,”acceptedAnswer”:{“@type”:”Answer”,”text”:”The Tornado BDSO 20/21 stand-on scrubber in all three battery configurations – TS120-S59-UC, TS120-S59-UG and TS120-S59-UE.”}},{“@type”:”Question”,”name”:”How do I order the M8 x 22 screw (part# 60110814) or get help?”,”acceptedAnswer”:{“@type”:”Answer”,”text”:”You can add the M8 x 22 screw (part# 60110814) directly to your cart on this page, or call us at 763-535-0770. Our staff at 5415 West Broadway, Crystal, MN 55428 has been servicing Tornado equipment since 1956 and can help confirm the right part for your machine.”}}]}






Reviews
There are no reviews yet