Tornado BDSO 20/21 Square Key 6 x 6 x 20 60906062

$1.99

Genuine square drive key, 6 x 6 x 20 mm (part# 60906062), for the Tornado BDSO 20/21 stand-on scrubber drive train – a short 6 mm key used at the sprocket hubs. Fits TS120-S59-UC, UG and UE.

This square key, 6 x 6 x 20 mm (part# 60906062), locks a hub to its shaft in the drive train of the Tornado BDSO 20/21 stand-on scrubber. It is a short 6 mm key used at the sprocket hubs. Sitting in matching keyways cut in the shaft and the hub, it is the component that actually transmits torque – without it the hub is a slip fit and turns freely on the shaft no matter how tight the retaining fastener is.

Keys fail by rounding rather than breaking, and they take the keyway with them if left alone. The first sign is a small clunk as drive is taken up, because the rounded key has to move before it bears. That movement hammers the keyway, which widens, which lets the key move further, and the cycle accelerates. Eventually the shaft turns while the hub stands still – a failure usually blamed on the motor or the sprocket rather than on a part worth a couple of dollars. Any key whose corners are no longer sharp should be replaced, and any key that has been run loose should prompt a careful look at both keyways.

Because the key is the cheapest part in the joint and the only one protecting the expensive ones, fit a new one every time a hub comes off the shaft. Seat it fully in the shaft keyway before sliding the hub on, and make sure it is not standing proud at either end – a key that stops the hub seating square puts the whole drive out of true.

Compatible Models

  • Tornado BDSO 20/21 Stand-On Scrubber – TS120-S59-UC (lead acid)
  • Tornado BDSO 20/21 Stand-On Scrubber – TS120-S59-UG (AGM)
  • Tornado BDSO 20/21 Stand-On Scrubber – TS120-S59-UE (TPPL)

Make sure you order the right length – this machine uses more than one size of key in the drive train. Call 763-535-0770 with your serial number if you are not certain. Twin City Vacuum, 5415 West Broadway, Crystal, MN 55428, since 1956.

Tornado BDSO 20/21 Square Key 6 x 6 x 20 FAQ

What does this square key do on the Tornado BDSO 20/21?
It locks a hub to its shaft so torque is transmitted. Without the key the hub simply turns on the shaft however tight the retaining fastener is.

How do I know if the square key (part# 60906062) needs replacing?
A clunk as drive is taken up is the classic sign. Pull the key and look at the corners – if they are rounded rather than sharp, replace it, and inspect both keyways for widening.

Which size is this key and will another size fit?
This is the 6 x 6 x 20 mm key. The BDSO 20/21 drive train uses more than one key size, so order by part number rather than by eye – a key of the wrong length will not support the hub correctly.

How do I order the square key (part# 60906062) or get help?
You can add the square key (part# 60906062) directly to your cart on this page, or call us at 763-535-0770. Our staff at 5415 West Broadway, Crystal, MN 55428 has been servicing Tornado equipment since 1956 and can help confirm the right part for your machine.

{“@context”:”https://schema.org”,”@type”:”FAQPage”,”mainEntity”:[{“@type”:”Question”,”name”:”What does this square key do on the Tornado BDSO 20/21?”,”acceptedAnswer”:{“@type”:”Answer”,”text”:”It locks a hub to its shaft so torque is transmitted. Without the key the hub simply turns on the shaft however tight the retaining fastener is.”}},{“@type”:”Question”,”name”:”How do I know if the square key (part# 60906062) needs replacing?”,”acceptedAnswer”:{“@type”:”Answer”,”text”:”A clunk as drive is taken up is the classic sign. Pull the key and look at the corners – if they are rounded rather than sharp, replace it, and inspect both keyways for widening.”}},{“@type”:”Question”,”name”:”Which size is this key and will another size fit?”,”acceptedAnswer”:{“@type”:”Answer”,”text”:”This is the 6 x 6 x 20 mm key. The BDSO 20/21 drive train uses more than one key size, so order by part number rather than by eye – a key of the wrong length will not support the hub correctly.”}},{“@type”:”Question”,”name”:”How do I order the square key (part# 60906062) or get help?”,”acceptedAnswer”:{“@type”:”Answer”,”text”:”You can add the square key (part# 60906062) directly to your cart on this page, or call us at 763-535-0770. Our staff at 5415 West Broadway, Crystal, MN 55428 has been servicing Tornado equipment since 1956 and can help confirm the right part for your machine.”}}]}

Reviews

There are no reviews yet

Be the first to review “Tornado BDSO 20/21 Square Key 6 x 6 x 20 60906062”

Your email address will not be published. Required fields are marked *