Tornado BDSO 20/21 Terminal Board 49400031
$7.99
Genuine 2×4 terminal board (part# 49400031) for the Tornado BDSO 20/21 stand-on scrubber – the junction point where the central frame wiring is landed. Fits TS120-S59-UC, UG and UE.
The terminal board (part# 49400031) is the 2 x 4 junction block mounted in the central frame of the Tornado BDSO 20/21 stand-on scrubber, where wiring from the steering column, the control panel and the frame harness is landed and joined. It is the part that turns a loom into a serviceable circuit: without it every joint would be a splice, and tracing a fault would mean cutting into the harness.
Terminal boards fail from corrosion and from heat. On a machine that sprays solution all day, moisture finds its way to the terminals, and the first symptom is usually intermittent – a circuit that works until the machine is washed down, or a function that drops out over bumps as a corroded terminal loses contact. Heat damage is the other mode: a loose screw at a terminal creates resistance, resistance makes heat, and the board discolours or melts around that terminal. A board with browned or charred plastic at any position should be replaced rather than cleaned, and the wire landed there should be checked for the same damage.
When you fit a new board, land each wire on the same position it came from, tighten every terminal including the unused ones, and check for discoloured insulation on the wires themselves. If one terminal has overheated, the crimp on that wire has usually suffered too.
Compatible Models
- Tornado BDSO 20/21 Stand-On Scrubber – TS120-S59-UC (lead acid)
- Tornado BDSO 20/21 Stand-On Scrubber – TS120-S59-UG (AGM)
- Tornado BDSO 20/21 Stand-On Scrubber – TS120-S59-UE (TPPL)
Call 763-535-0770 with your serial number if you are chasing an intermittent electrical fault. Twin City Vacuum, 5415 West Broadway, Crystal, MN 55428, since 1956.
Tornado BDSO 20/21 Terminal Board FAQ
What does the terminal board do on the Tornado BDSO 20/21?
It is the junction block where wiring from the steering column, control panel and frame harness is landed and joined, so circuits can be traced and serviced without cutting into the loom.
How do I know if the terminal board (part# 49400031) needs replacing?
Intermittent faults that appear after a wash-down or over bumps point at corroded terminals. Browned or charred plastic at any position means a terminal has overheated – replace the board rather than cleaning it.
What models is the terminal board (part# 49400031) compatible with?
The Tornado BDSO 20/21 stand-on scrubber in all three battery configurations – TS120-S59-UC, TS120-S59-UG and TS120-S59-UE.
How do I order the terminal board (part# 49400031) or get help?
You can add the terminal board (part# 49400031) directly to your cart on this page, or call us at 763-535-0770. Our staff at 5415 West Broadway, Crystal, MN 55428 has been servicing Tornado equipment since 1956 and can help confirm the right part for your machine.
{“@context”:”https://schema.org”,”@type”:”FAQPage”,”mainEntity”:[{“@type”:”Question”,”name”:”What does the terminal board do on the Tornado BDSO 20/21?”,”acceptedAnswer”:{“@type”:”Answer”,”text”:”It is the junction block where wiring from the steering column, control panel and frame harness is landed and joined, so circuits can be traced and serviced without cutting into the loom.”}},{“@type”:”Question”,”name”:”How do I know if the terminal board (part# 49400031) needs replacing?”,”acceptedAnswer”:{“@type”:”Answer”,”text”:”Intermittent faults that appear after a wash-down or over bumps point at corroded terminals. Browned or charred plastic at any position means a terminal has overheated – replace the board rather than cleaning it.”}},{“@type”:”Question”,”name”:”What models is the terminal board (part# 49400031) compatible with?”,”acceptedAnswer”:{“@type”:”Answer”,”text”:”The Tornado BDSO 20/21 stand-on scrubber in all three battery configurations – TS120-S59-UC, TS120-S59-UG and TS120-S59-UE.”}},{“@type”:”Question”,”name”:”How do I order the terminal board (part# 49400031) or get help?”,”acceptedAnswer”:{“@type”:”Answer”,”text”:”You can add the terminal board (part# 49400031) directly to your cart on this page, or call us at 763-535-0770. Our staff at 5415 West Broadway, Crystal, MN 55428 has been servicing Tornado equipment since 1956 and can help confirm the right part for your machine.”}}]}






Reviews
There are no reviews yet