Tornado EB 30/1 Thrust Piece K41100130

The thrust piece (part# K41100130) is a small component with a disproportionate job on the Tornado EB 30/1 electric broom. It provides the bearing face that takes end load — axial thrust — in the brush drive area, keeping the rotating assembly located along its axis rather than allowing it to float sideways.

Why a worn thrust piece matters

When it wears, the rotating assembly gains end float. That shows up as a knocking or clicking that changes with direction of travel, a brush that shifts sideways slightly under load, and a toothed belt that creeps off its proper line because the pulley is no longer where it should be. The belt symptom is the one that usually gets noticed first, and it is routinely mistaken for a belt or pulley fault.

Because it is a sacrificial bearing surface, it is meant to wear — that is its purpose, protecting more expensive parts from taking the thrust directly. Replacing it on schedule is far cheaper than letting end float work its way into the transmission.

When to change it

Change it whenever the brush drive is apart for other work — a belt change or a bearing replacement — rather than refitting a worn one. At this price it is not worth reusing. Check it any time you are chasing a belt that will not stay in line, or a knock that appears only under load.

Compatible Models

• Tornado EB 30/1 Electric Broom — Model 93220
• Tornado EB 30/1 Electric Broom — Model 93222

Twin City Vacuum has been selling and servicing Tornado equipment since 1956. Call 763-535-0770 or stop by 5415 West Broadway, Crystal, MN 55428 and we will confirm the right part against your machine.

Frequently Asked Questions

What does the thrust piece do on the Tornado EB 30/1?

It provides the bearing face that takes end (axial) load in the brush drive, keeping the rotating assembly located along its axis instead of floating sideways.

How do I know if the thrust piece is worn?

End float is the sign: a knock or click that changes with direction of travel, the brush shifting sideways under load, or a toothed belt that keeps creeping off its line because the pulley has moved. The belt symptom is usually noticed first and often blamed on the belt.

When should I replace it?

Whenever the brush drive is apart for other work — a belt or bearing change — rather than refitting a worn one. It is a sacrificial bearing surface designed to wear so that more expensive parts do not, and at this price it is not worth reusing.

What models is the thrust piece (part# K41100130) compatible with?

The Tornado EB 30/1 Electric Broom, Models 93220 and 93222.

How do I order the Thrust Piece (part# K41100130) or get help?

You can add the Thrust Piece (part# K41100130) directly to your cart on this page, or call us at 763-535-0770. Our staff at 5415 West Broadway, Crystal, MN 55428 has been servicing Tornado equipment since 1956 and can help confirm the right part for your machine.