Tornado Washer for 3/8 in. Hardware X8230
$2.99
Genuine OEM washer (part# X8230) for commercial high-speed burnishers — the washer listed with the 3/8-16 screw and nut on every Brute Force drawing. Fits all Tornado Brute Force burnishers (see full list below).
The X8230 is the washer listed as part of the heavy hardware group on the Brute Force burnisher drawings, immediately alongside the 3/8-16 screw (X8223) and the nut (X8231). It appears on all four drawings in the book, on the Brute Force 1600 (98458B), on the Brute Force 2000 (98482B), and on both Brute Force 2000 Dust Control (98486) drawings. It is a shared part used across Tornado machines — see the full list of models below.
Washers in a heavy joint do more than keep things tidy. Under a 3/8 inch fastener the clamping force is high enough to dent or dish a casting or a sheet-metal flange directly, and a dented seat loses preload as it settles. The washer spreads that force, protects the surface beneath, and gives the nut a smooth face to turn against so the torque wrench reading actually corresponds to clamping load rather than to friction.
Replace the X8230 if it is dished, cracked, scored, or corroded, and whenever you disturb the 3/8 inch hardware it belongs to. Look at both faces: a washer that has been spinning under a nut will be polished and burred on one side and that polish means the surface underneath has been scored too, which is worth checking while the joint is apart.
The practical advice with the heavy hardware group is to replace the washer and the lock hardware as a matter of course and re-use only the screw and nut if they are in good condition. The washer is shared across the Brute Force burnisher line and carries no model name. Call 763-535-0770 with your model and serial number if you want the hardware for a particular callout listed.
Compatible Models
- Tornado models:
- 20″ Marathon 1200 (12 Gallon 115V) – Series P — 98168
- P Series 1600 Glazer (115V) — 98458
- Brute Force 1600 — 98458B
- P Series 1600 Glazer (230V) — 98459
- P Series 2000 Glazer (115V) — 98482
- Brute Force 2000 High-Speed Glazer — 98482B
- Brute Force 2000 High-Speed Glazer with Dust Control — 98486
- P Series 2000 Glazer (230V) — 98487
Frequently asked questions
What does the washer (part# X8230) do on a burnisher?
It spreads the high clamping load from the 3/8 inch hardware over a wider area, protects the surface beneath from denting, and gives the nut a smooth face to turn against.
How do I know if my X8230 washer needs replacing?
Replace it if it is dished, cracked, scored or corroded, and whenever you take the 3/8 inch hardware apart. A polished, burred face means it has been spinning under the nut.
Which other parts go with the X8230?
It is listed with the 3/8-16 screw (X8223) and the nut (X8231) in the same group of callouts on every Brute Force drawing.
What models is the washer (part# X8230) compatible with?
All three Tornado Brute Force burnishers: the 1600 (98458B), the 2000 High-Speed Glazer (98482B) and the 2000 Dust Control (98486).
How do I order the washer (part# X8230) or get help?
You can add the washer (part# X8230) directly to your cart on this page, or call us at 763-535-0770. Our staff at 5415 West Broadway, Crystal, MN 55428 can help you find the right part for your machine.






Reviews
There are no reviews yet