Riccar Vibrance Belt Protect Upright Vacuum & Replacement Parts
The Riccar Vibrance Belt Protect series includes the premium VIBPBP.2 and the VIBCBP.1. Buy a new Riccar Vibrance, or find genuine OEM replacement parts for the one you already own at Twin City Vacuum.
- HEPA bag filtration (RAH-6 HEPA bags)
- 12 amp motor assembly
- Belt Protect agitator: clutch agitator on the VIBPBP.2, non-clutch on the VIBCBP.1
- Replaceable brush strips and belt
- Nozzle headlight, foot pedal and on-board hose and tools
Riccar Vibrance Replacement Parts
The Riccar Vibrance Belt Protect parts diagram covers the VIBPBP.2 and VIBCBP.1. Cards marked VIBPBP.2 Only or VIBCBP.1 Only are specific to that model, so pick the one that matches your model number.
Main Body Front Parts
Dust cover, bags, filters, motor cover, switches and sensors. Covers the VIBPBP.2 and VIBCBP.1.
Parts included
- Dust cover assembly, latch, spring and side seal
- HEPA bag, HEPA & charcoal filter package (VIBPBP.2) and foam post filter (VIBCBP.1)
- Secondary filter, filter support screen and inner motor cover foam
- Motor cover, motor cover seals and motor cover assembly
- Dust compartment and motor compartment seals
- Thermal switch, thermal switch seal and thermal switch assembly
- Pressure switch, pressure switch mount and FBI assembly
- Hall sensor board kit and hall sensor wire harness
- Motor cord, electrical connector, switch cover and seal
- Rear wheels, rear wheel axle and axle clamp
Main Body Rear Parts
Hose, wand and on-board tools. Covers the VIBPBP.2 and VIBCBP.1.
Parts included
- Hose assembly and fast task stretch wire hose
- Hose cuff, hose connector and suction inlet complete
- Wand
- Crevice tool
- Upholstery tool and slide-on dust brush
- Tool shelf, tool clip and upholstery tool retainer clip
- Dust compartment kit with motor cover (upgrade)
- Spacer and mounting screws
Nozzle Assembly Parts
Nozzle housing, base plate, wheels, headlight, belt and foot pedal. Covers the VIBPBP.2 and VIBCBP.1.
Parts included
- Nozzle housing assembly (black replacement or red)
- Base plate assembly, base plate, clip and clip spring
- Front wheel assembly and base plate wheel pin
- Headlamp lens, reflector set, light bulb and lamp holder
- Hall sensor & pulley assembly and Riccar belt
- Foot pedal, pedal frame, pedal shaft and pedal spring
- Carpet/floor switch assembly and detent (VIBPBP.2)
- Belt guard (VIBCBP.1)
- Nozzle hose, nozzle inlet tube and furniture guard
Handle Assembly Parts – VIBPBP.2 Only
The handle, cord hooks and switch. For the VIBPBP.2 only.
Parts included
- Handle assembly complete, handle right and left halves
- Steel handle tube and handle harness
- Handle mount front (sparkle silver) and back
- Power cord assembly, 30 ft
- E-clip
- Upper cord hook assembly, hook mount, spring and screws
- Upper/lower cord hook, hose carrier and lower cord hook screw
- On/off switch, indicator light and handle bolt
- Upper cord hook with power cord (replacement)
Handle Assembly Parts – VIBCBP.1 Only
The handle, cord hooks and switch. For the VIBCBP.1 only.
Parts included
- Handle assembly complete, handle right and left halves
- Steel handle tube and commercial handle harness
- Handle mount front (super red) and back
- Power cord assembly, red and black
- Red 40′ extension cord
- Upper cord hook assembly, hook mount, spring and screws
- Upper/lower cord hook, hose carrier and lower cord hook screw
- On/off switch, indicator light and handle bolt
Agitator & Brushroll Parts – VIBPBP.2 Only
Everything inside the clutch brushroll. For the VIBPBP.2 only.
Parts included
- Clutch agitator assembly
- Brush strips: red and gold, white crimped or natural
- Agitator pulley clutch and clutch rubber pad assembly
- Agitator compression spring, inside metal cam and outside cam
- Agitator bearing, bearing holder assembly and bearing felt cover
- Metal end caps and rubber end cover
- Agitator shaft, spring pin and spring clip
- Washer adjustment kit
Agitator & Brushroll Parts – VIBCBP.1 Only
Everything inside the non-clutch brushroll. For the VIBCBP.1 only.
Parts included
- Non-clutch agitator assembly complete
- Agitator brush strip, red and gold
- Non-clutch pulley and non-clutch agitator shaft
- Agitator bearing, bearing holder assembly and bearing felt cover
- End caps and rubber end caps, left and right
- Spacing spring, spring clip and E-clip
Motor Assembly Parts – VIBPBP.2 Only
The 12 amp motor assembly, mounts, seals and sound suppressor. For the VIBPBP.2 only.
Parts included
- 12 amp motor assembly
- Front motor mount and back motor mount seal
- Clean air motor rear strip seal
- Metal pivot
- Motor sound suppressor
Motor Assembly Parts – VIBCBP.1 Only
The 12 amp motor assembly, mounts, seals and motor shroud. For the VIBCBP.1 only.
Parts included
- 12 amp motor assembly
- Front motor mount and back motor mount seal
- Clean air motor rear strip seal
- Metal pivot
- Motor shroud

About the Riccar Vibrance Belt Protect Upright Vacuum
The Riccar Vibrance Belt Protect series is built around HEPA bag filtration and a 12 amp motor. The VIBPBP.2 uses a clutch agitator, while the VIBCBP.1 uses a non-clutch agitator with a belt guard. The official parts diagram is organized into six sections: Main Body Front (dust cover and filters), Main Body Rear (hose and tools), Nozzle Assembly, Handle Assembly, Agitator and Motor Assembly, with a separate handle, agitator and motor diagram for each model. That makes it straightforward to source belts, bags, filters, brush strips, switches and hoses. Twin City Vacuum carries OEM replacement parts for the Riccar Vibrance.
Riccar Vibrance Parts: Frequently Asked Questions
What is the Riccar Vibrance Belt Protect vacuum?
The Riccar Vibrance Belt Protect is an upright vacuum with HEPA bag filtration, a 12 amp motor, an on-board hose and tools, and a nozzle with a headlight and foot pedal. This parts diagram covers the VIBPBP.2 and VIBCBP.1 models.
Which Riccar Vibrance models are covered?
These parts diagrams cover the VIBPBP.2 and the VIBCBP.1. A few parts differ between the two, such as the agitator, post filter, handle and cord, and those are marked in each parts list.
How are the Riccar Vibrance parts diagrams categorized?
The official Riccar Vibrance parts diagram is split into six sections: main body front (including the dust cover and filters), main body rear (hose and tools), nozzle assembly, handle assembly, agitator and motor assembly. The handle, agitator and motor each have a separate diagram for the VIBPBP.2 and VIBCBP.1, so they have their own pages.
Why are there separate handle, agitator and motor pages for each model?
The VIBPBP.2 and VIBCBP.1 use different handles, agitators and motor parts, and their diagrams use different position numbers. Pick the page for your model number so the part numbers match your vacuum.
Where do I find the Riccar Vibrance belt?
The belt and the hall sensor & pulley assembly are listed under Nozzle Assembly.
Where do I find Riccar Vibrance bags and filters?
HEPA bags, the HEPA & charcoal filter package, the foam post filter and the secondary filter are all listed under Main Body Front.
Where do I find Riccar Vibrance brush strips?
Brush strips, along with the agitator bearing and pulley, are listed under Agitator for your model.
Where do I find the Riccar Vibrance power cord and switches?
The power cord and on/off switch are listed under Handle Assembly for your model. The carpet/floor switch is under Nozzle Assembly, and the thermal switch and pressure switch are under Main Body Front.
What is the difference between the VIBPBP.2 and VIBCBP.1?
The VIBPBP.2 uses a clutch agitator and a HEPA & charcoal post filter. The VIBCBP.1 uses a non-clutch agitator, a foam post filter and a belt guard, and has a red housing. Check your model number and use the parts marked for it.
Can Twin City Vacuum service my Riccar Vibrance?
Yes. Twin City Vacuum is an authorized repair center stocking genuine OEM parts for the Riccar Vibrance. Call 763-535-0770 to ask about parts or schedule service.
