Titan TC6000.2 Agitator Parts

Find genuine Titan TC6000.2 agitator parts for the Titan TC6000.2 commercial upright vacuum. Can’t find your part? Call us at 763-535-0770.

Click a red dot on the Titan TC6000.2 agitator diagram to open that part. Parts we do not carry online show a call-us note, and their dots jump to that row in the numbered parts list below.

Find genuine Titan TC6000.2 agitator replacement parts for the Titan TC6000.2 commercial upright vacuum. The agitator diagram shows the metal brushroll and everything on it: the red and gold brush strips, the left and right end caps and rubber end covers, the bearing holder and felt cover, the non-clutch pulley with its bearing, the spacing spring, the agitator shaft and its clips. Twin City Vacuum has been selling and servicing vacuums since 1956. Call 763-535-0770 or stop by 5415 West Broadway, Crystal, MN 55428.

Titan TC6000.2 Agitator Parts List

#ImagePart DescriptionPart NumberPrice
1Left Rubber End Cover B012-0214Left Rubber End CoverB012-0214$2.99
2Left End Cap B012-0700Left End CapB012-0700$2.99
3Agitator Bearing Felt Cover B012-0600Agitator Bearing Felt CoverB012-0600$2.99
4Agitator Bearing Holder Assembly C012-1500Agitator Bearing Holder AssemblyC012-1500$8.99
5Red and Gold Nylon Brush Strip B012-2400BRed and Gold Nylon Brush StripB012-2400B$4.99
6Non-Clutch Pulley with Bearing C012-0914Non-Clutch Pulley with BearingC012-0914$11.99
7Spacing Spring B624-0100Spacing SpringB624-0100$2.99
8Right End Cap B012-0800Right End CapB012-0800$2.99
9Right Rubber End Cover B012-0114Right Rubber End CoverB012-0114$2.99
10Agitator Shaft B012-1000Agitator ShaftB012-1000$3.99
11E-Clip A732-0200E-ClipA732-0200$2.99
12Agitator Spring Clip A732-0400Agitator Spring ClipA732-0400$2.99
13Agitator Assembly Non ClutchD012-0500DCall 763-535-0770

Titan TC6000.2 Agitator Parts: What to Look For

The brush strips wear first. When the bristles are worn short, the brushroll no longer reaches into the carpet and the vacuum leaves dirt behind even with a new belt. Replace both strips together.

Noise or a brushroll that turns stiffly usually points to the bearings. The bearing holder assembly and the non-clutch pulley with bearing carry the brushroll, and the left and right rubber end covers keep hair and carpet fiber out of them. Replacing worn end covers early protects the bearings.

The complete agitator assembly is not sold online; call us and we will check what is available for your TC6000.2.

Titan TC6000.2 Agitator Parts — Frequently Asked Questions

Which brush strips fit the Titan TC6000.2?

The TC6000.2 uses the red and gold nylon brush strip B012-2400B, the same strip as CleanMax Pro-Series uprights.

Why is my TC6000.2 brushroll noisy?

Worn bearings, a worn pulley bearing or hair wrapped into the end caps are the usual causes. Clean the ends and check the bearing holder and pulley.

Can I buy the complete TC6000.2 agitator?

The complete agitator assembly is not sold online. Call 763-535-0770 and we will check what is available.

Shop the Titan TC6000.2 commercial upright vacuum, see all Titan TC6000.2 parts diagrams or browse all Titan vacuum parts. Questions? Call us at 763-535-0770 or visit us at 5415 West Broadway, Crystal, MN 55428.