Find genuine Titan TC6000.2 main body back parts for the Titan TC6000.2 commercial upright vacuum. Can’t find your part? Call us at 763-535-0770.
Click a red dot on the Titan TC6000.2 main body back diagram to open that part. Parts we do not carry online show a call-us note, and their dots jump to that row in the numbered parts list below.
1. Handle Screw M5 x 45 – A232-01003. Hose Hanger – 54.1402. Screw 8-32 x 3/8 – A732-77052. Screw 8-32 x 3/8 – A732-77054. Bag Inlet Collar – 89.85510. Upper Wand Holder – 54.8575. Suction Inlet Gasket – Z192. Screw 8-32 x 3/8 – A732-77056. Upholstery Tool Retainer Clip – B626-1414B7. Crevice Tool Holder – B625-01139. Lower Cord Wrap and Wand Holder Assembly – CM011632. Screw 8-32 x 3/8 – A732-77058. Pressure Relief Valve Assembly – CM02102111. Dust Compartment Assembly with Valve – C625-010612. Clean Out Cuff – CMQD-COFind genuine Titan TC6000.2 main body back replacement parts for the Titan TC6000.2 commercial upright vacuum. The diagram shows the back of the body: the hose hanger and carry handle, the bag inlet and suction inlet gasket, the tool clips and holders, the upper and lower wand holders, the pressure relief valve, the dust compartment and the clean out cuff. Twin City Vacuum has been selling and servicing vacuums since 1956. Call 763-535-0770 or stop by 5415 West Broadway, Crystal, MN 55428.
Titan TC6000.2 Main Body Back Parts List
| # | Image | Part Description | Part Number | Price |
|---|---|---|---|---|
| 1 | ![]() | Handle Screw M5 x 45 | A232-0100 | $2.99 |
| 2 | ![]() | Screw 8-32 x 3/8 | A732-7705 | Call 763-535-0770 |
| 3 | ![]() | Hose Hanger | 54.140 | $8.99 |
| 4 | ![]() | Bag Inlet Collar | 89.855 | $2.99 |
| 5 | ![]() | Suction Inlet Gasket | Z19 | $2.99 |
| 6 | ![]() | Upholstery Tool Retainer Clip | B626-1414B | $2.99 |
| 7 | ![]() | Crevice Tool Holder | B625-0113 | $3.99 |
| 8 | ![]() | Pressure Relief Valve Assembly | CM021021 | $10.99 |
| 9 | ![]() | Lower Cord Wrap and Wand Holder Assembly | CM01163 | $21.99 |
| 10 | ![]() | Upper Wand Holder | 54.857 | $17.24 |
| 11 | ![]() | Dust Compartment Assembly with Valve | C625-0106 | $52.99 |
| 12 | ![]() | Clean Out Cuff | CMQD-CO | $17.99 |
Titan TC6000.2 Main Body Back Parts: What to Look For
The bag inlet and the suction inlet gasket seal the airflow into the bag. A cracked inlet or a flattened gasket lets dust leak into the dust compartment and costs suction, so check both whenever you find dust outside the bag.
The pressure relief valve opens when the airflow is blocked so the motor does not overheat; if the vacuum loses suction suddenly, check it for a clog. The wand holders and tool clips hold the Quick Draw wand and the tools on the back of the vacuum, and they break when the machine is tipped over.
The clean out cuff lets you clear a clog in the hose path without taking the vacuum apart.
Titan TC6000.2 Main Body Back Parts — Frequently Asked Questions
What does the pressure relief valve do on the TC6000.2?
It opens when the airflow is blocked so the motor gets cooling air and does not overheat.
Why is there dust outside the bag on my TC6000.2?
A cracked bag inlet, a worn suction inlet gasket or a bag not seated fully on the inlet are the usual causes.
Are the TC6000.2 wand holders sold separately?
Yes. The upper wand holder and the lower wand holder with cord hook are both sold on this page.
Shop the Titan TC6000.2 commercial upright vacuum, see all Titan TC6000.2 parts diagrams or browse all Titan vacuum parts. Questions? Call us at 763-535-0770 or visit us at 5415 West Broadway, Crystal, MN 55428.














