Tornado CVD 30 Front Part | Twin City Vacuum

Q: How often should I replace the HEPA filter on the Tornado CVD 30?

The sealed HEPA filter (K28892860) should typically be replaced every 6 to 12 months depending on use, or sooner if you notice reduced airflow or a drop in filtration performance.

Shop genuine Tornado CVD 30 front part replacement parts for Model 91430 below at Twin City Vacuum in Crystal, MN.

Click on any numbered part in the diagram below to go directly to that part’s product page.

#	Part Description	Part Number	Link
6	Pinion	K53520850	View Part
8	Terminal	K66435510	View Part
9	Screw M4 x 12	K73031060	View Part
10	Nyloc Nut	K73114310	View Part
18	Complete Vacuum Motor and Housing	K40715560	View Part
23	Electrical Covering	K40715430	View Part
—	Red Lever and Tube Assembly	K54813520	View Part
27	Filter Holder	K50428360	View Part
33	Motor Cover	K40532240	View Part
36	Back Housing	K50601163	View Part
38	Complete Front Cover	K40715440	View Part
44	Bearing Shell 2 Pack	K42500790	View Part
66	Spring	K53323390	View Part
78	Sealed HEPA Filter	K28892860	View Part
79	Intake Filter	K57316110	View Part
146	Screw M5 x 20	K73031080	View Part
332	HEPA Label	K53981400	View Part

About the Tornado CVD 30 Front Part Assembly

The parts listed above are from the Tornado CVD 30 12-inch commercial upright vacuum front assembly, Model 91430 — including the vacuum motor and housing, HEPA and intake filters, filter holder, front cover, and related hardware. All are genuine Tornado OEM components, and most are shared with the Tornado CVD 38. In stock at Twin City Vacuum in Crystal, MN. Call 763-535-0770 if you need help identifying your part.

Frequently Asked Questions

What parts are in the Tornado CVD 30 front assembly?

The front assembly of the Tornado CVD 30 includes the complete vacuum motor and housing (K40715560), the sealed HEPA filter (K28892860), the intake filter (K57316110), the filter holder (K50428360), the complete front cover (K40715440), the back housing (K50601163), and supporting hardware such as the pinion, terminal, springs, and screws. Each part is listed above with its part number and a link to order.

How often should I replace the HEPA filter on the Tornado CVD 30?

The sealed HEPA filter (K28892860) on the Tornado CVD 30 should typically be replaced every 6 to 12 months depending on use, or sooner if you notice reduced airflow or a drop in filtration performance. Pair it with a fresh intake filter (K57316110) for best results. Both are genuine Tornado parts in stock at Twin City Vacuum.

Are the Tornado CVD 30 and CVD 38 front parts the same?

Most front assembly parts are shared between the Tornado CVD 30 (Model 91430) and CVD 38 (Model 91438), including the motor and housing, filters, filter holder, and front cover. Always confirm compatibility by matching the part number before ordering — every product page lists the compatible models.

What does the complete vacuum motor and housing include?

The complete vacuum motor and housing (K40715560) is supplied as a single assembled unit for the Tornado CVD 30 and CVD 38, making motor replacement straightforward. If you are only replacing wear items, check the individual filters, bearing shell (K42500790), and springs listed in the diagram above first.

View the complete Tornado CVD 30 parts list, or call Twin City Vacuum at 763-535-0770 for help finding the right part.