Tornado Tempest Side Broom Parts

Tornado Tempest replacement parts for Model TV400-W26-U. Can’t find your part? Call us at 763-535-0770.

Click on any numbered part in the diagram below to go directly to that part’s product page.

Find genuine Tornado Tempest side broom parts for Model TV400-W26-U. The side broom is what lets a wide-area sweeper finish a room: the main brushroll cleans the 26-inch path under the machine, and this assembly reaches into the wall angles and under the fixtures it cannot. This sheet covers the side brush (part# K50322210), its motor (part# K64542210) and drive disc (part# K56250410), the arm and bracket that carry them outboard, the height adjustment that sets how hard the brush works, and the push-button control that lets an operator switch the broom off on open floor to save battery. Twin City Vacuum has been selling and servicing Tornado equipment since 1956. Call 763-535-0770 or stop by 5415 West Broadway, Crystal, MN 55428.

#ImagePart DescriptionPart NumberPrice
10Side Broom Bracket part number K50979590 — photo coming soonSide Broom BracketK50979590Call 763-535-0770
20Screw M5 x 20 K73031080Screw M5 x 20 (two fitted)K73031080$0.99
20Side Broom Cap part number K50342360 — photo coming soonSide Broom CapK50342360Call 763-535-0770
30Height Adjustment Plate Bolt M8 x 42 part number K53160240 — photo coming soonHeight Adjustment Plate Bolt M8 x 42K53160240$27.99
40Washer M8 part number K73120170 — photo coming soonWasher M8K73120170Call 763-535-0770
50Spring Clip part number K73430140 — photo coming soonSpring ClipK73430140Call 763-535-0770
60Side Broom Arm part number K50979600 — photo coming soonSide Broom ArmK50979600$75.99
70Side Broom Motor part number K64542210 — photo coming soonSide Broom MotorK64542210$343.99
80Drive Disc part number K56250410 — photo coming soonDrive DiscK56250410$41.99
90Deflector Plate part number K50645590 — photo coming soonDeflector PlateK50645590$40.99
100Screw M4 x 10 part number K73044830 — photo coming soonScrew M4 x 10K73044830$0.99
110Height Adjustment Bracket part number K50963980 — photo coming soonHeight Adjustment BracketK50963980$45.99
120Bolt M12 x 56 part number K53181070 — photo coming soonBolt M12 x 56K53181070$40.99
130Height Adjustment Washer part number K73120120 — photo coming soonHeight Adjustment WasherK73120120Call 763-535-0770
140Locking Ring part number K73430830 — photo coming soonLocking RingK73430830Call 763-535-0770
150Screw M6 x 20 (two fitted) part number K73060920 — photo coming soonScrew M6 x 20 (two fitted)K73060920$0.99
170Star Grip Knob part number K63213430 — photo coming soonStar Grip KnobK63213430$28.99
180Side Broom Washer part number K51150420 — photo coming soonSide Broom WasherK51150420$6.99
190Screw M3 x 8 part number K73062030 — photo coming soonScrew M3 x 8K73062030$0.99
200Push Button part number K50321890 — photo coming soonPush ButtonK50321890$53.99
210Bolt M5 x 35 (two fitted) part number K53160250 — photo coming soonBolt M5 x 35 (two fitted)K53160250$23.99
220Spring Clip (two fitted) part number K73430410 — photo coming soonSpring Clip (two fitted)K73430410Call 763-535-0770
230Side Broom Spring part number K53321890 — photo coming soonSide Broom SpringK53321890$8.99
240Side Brush part number K50322210 — photo coming soonSide BrushK50322210$33.99
270Cable Tie with Clip part number K66506050 — photo coming soonCable Tie with ClipK66506050Call 763-535-0770
280Cable Tie part number K66414640 — photo coming soonCable TieK66414640Call 763-535-0770
290Ferrite Sleeve part number K65743260 — photo coming soonFerrite SleeveK65743260Call 763-535-0770

A note on callout 20. The factory sheet gives the same number to two different parts — the M5 x 20 screw and the side broom cap — with a single marker on the drawing. Rather than guess which the marker refers to, we have listed both in the table and left that callout without a clickable dot. Call 763-535-0770 with your machine and we will identify the right one.

Frequently Asked Questions

My Tornado Tempest cleans the middle of the floor but leaves the edges — what is wrong?

That is the classic side broom fault. The main brushroll covers the centre path and is unaffected, so the machine looks like it is working. Check whether the side brush (part# K50322210) is turning at all — if not, look at the side broom motor (part# K64542210) after first confirming the brush spins freely by hand.

How often does the side brush need replacing?

It is the fastest-wearing part on the machine, because it is deliberately run against walls and skirting all day. Judge it by reach rather than appearance: set the machine against a wall and see whether the bristle tips still make contact beyond the machine body.

My side brushes keep wearing out unevenly — why?

Usually a bent side broom arm (part# K50979600) or a worn drive disc (part# K56250410). Either lets the brush run out of true, and a wobbling brush wears to a cone in days instead of months. Check both before fitting another brush.

How should the side brush height be set?

So the bristle tips just contact the carpet without visibly bending. Too high and the brush flicks debris rather than moving it; too low and it scrubs, which loads the motor, cuts battery runtime and wears the brush out quickly. The height adjustment bracket (part# K50963980) and star grip (part# K63213430) hold the setting.

Why do two different parts share callout 20 on this diagram?

The factory sheet numbers both the M5 x 20 screw (part# K73031080) and the side broom cap (part# K50342360) as callout 20, with only one marker on the drawing. Because we cannot tell which the marker points to, we have left that callout without a clickable dot and listed both parts in the table. Call 763-535-0770 and we will identify the one you need.

Browse the rest of the Tornado Tempest parts range, or see the Tornado Tempest TV400-W26-U machine. Manufacturer information is at tornadovac.com. Questions? Call us at 763-535-0770 or visit us at 5415 West Broadway, Crystal, MN 55428.