Baseplate Screw B220-0414

The baseplate cover screw (part# B220-0414) is one of the small threaded fasteners that secures the baseplate cover to the underside of the Tornado Roam 97300 commercial upright vacuum, keeping the nozzle housing closed and the brushroll compartment sealed during operation.

On the Tornado Roam (Model 97300 / 97300C), the baseplate is the flat plate on the bottom of the cleaning head. Several of these screws hold it flush against the nozzle body so the vacuum keeps consistent suction across the full width of the brushroll and so the base does not rattle loose as the machine is pushed across carpet. Because they thread into the plastic nozzle housing and are backed out every time the brushroll or belt is serviced, part# B220-0414 is a common wear-and-loss item on high-use machines.

Compatible Models for the Baseplate Cover Screw

Part# B220-0414 is a genuine Tacony component shared across multiple brands. Per PartSmart Where Used, it is confirmed compatible with the following models:

• Tornado: Roam 97300, TV280, Roam 97300C
• Riccar: R10CV, R10D, R10P, R10S, R10SAND, R17, R50TAP
• Simplicity: S10CV, S10D, S10P, S10S, S10SAND, SC10CV
• CleanMax: Zoom ZM-500, Zoom ZM-700, Zoom ZM-800
• Powr-Flite: PRIMAP, WONDERP

Tacony’s PartSmart catalog lists part# B220-0414 as a shared fastener used across the broader Tacony commercial upright line in addition to the Tornado Roam. If you are matching this screw to a different machine, call us and we will confirm the fit before you order.

Replace the baseplate cover screw if it is stripped, cross-threaded, rusted, or missing — a situation that most often shows up after the baseplate has been removed for a belt or brushroll change. Tell-tale signs include a baseplate that no longer sits flush, a rattling or vibrating cleaning head, or a screw that spins freely without tightening. A missing or loose screw lets the baseplate flex under load, which can cause suction loss along one edge of the nozzle and premature wear on the belt.

Installation is straightforward: seat the baseplate evenly, start each screw by hand to avoid cross-threading the plastic boss, then snug them in a cross pattern so the plate seats flat. Twin City Vacuum has been selling and servicing Tornado equipment since 1956. Browse the full Tornado Roam 97300 / 97300C parts catalog for the matching baseplate, brushroll, and belt, or view the official machine details at tornadovac.com.

Frequently Asked Questions

What does the Baseplate Cover Screw do on the Tornado Roam 97300?

The Baseplate Cover Screw (part# B220-0414) fastens the baseplate cover to the nozzle housing on the Tornado Roam 97300 / 97300C, holding the plate flush so the cleaning head keeps full-width suction and stays rattle-free.

How do I know if my Baseplate Cover Screw needs replacing?

Replace it if the screw is stripped, rusted, cross-threaded, or missing, or if the baseplate no longer sits tight and the cleaning head rattles. Because it is removed for every belt or brushroll service, part# B220-0414 is worth replacing whenever the threads no longer bite.

What models is the Baseplate Cover Screw (part# B220-0414) compatible with?

Part# B220-0414 is a shared Tacony part confirmed by PartSmart to fit multiple models across Tornado, Riccar, Simplicity, CleanMax and Powr-Flite — including the Tornado Roam 97300 and 97300C. See the Compatible Models list above for the full breakdown, or call 763-535-0770 to confirm your exact machine.

How do I order the Baseplate Cover Screw (part# B220-0414) or get help?

You can add the Baseplate Cover Screw (part# B220-0414) directly to your cart on this page, or call us at 763-535-0770. Our staff at 5415 West Broadway, Crystal, MN 55428 has been servicing Tornado equipment since 1956 and can help confirm the right part for your machine.

Questions? Call us at 763-535-0770 or visit us at 5415 West Broadway, Crystal, MN 55428.