CleanMax CMPS-QDZ sections: Nozzle & Motor | Main Body Front | Main Body Back | Agitator | All CMPS-QDZ Parts
Find genuine CleanMax CMPS-QDZ agitator replacement parts for Model CMPS-QDZ. Can’t find your part? Call us at 763-535-0770.
Click on any numbered part in the diagram below to go directly to that part’s product page.
1. Agitator Assembly Complete2. Rubber End Cover, Left3. End Cap, Left4. Agitator Bearing Felt Cover6. Agitator Bearing Holder Assembly7. Agitator Brush Strip 10.3mm8. Non-Clutch Agitator Pulley w/Bearing5. Agitator Bearing9 Spacing Spring10. End Cap, Right11. Rubber End Cover, Right14. Cotter Pin12. Agitator Shaft13. E-Clip 4mmAbout the CleanMax CMPS-QDZ Agitator Assembly
Find genuine CleanMax CMPS-QDZ agitator replacement parts for Model CMPS-QDZ. The agitator, or brushroll, spins inside the cleaning head to loosen and sweep dirt, hair and grit into the airflow — its brush strips, bearings, end caps, drive pulley and shaft all work together to keep carpets groomed. Below you will find every numbered part from the agitator diagram, including the complete Agitator Assembly (D012-1700), individual bearings and brush strips, and the retaining hardware. Twin City Vacuum has been selling and servicing CleanMax equipment since 1956. All parts are sourced directly from Tacony. Call 763-535-0770 or stop by 5415 West Broadway, Crystal, MN 55428.
Frequently Asked Questions
What parts make up the CleanMax CMPS-QDZ agitator?
The agitator is built from the shaft, brush strips, bearings and bearing holder, end caps, rubber end covers, the drive pulley, a spacing spring and retaining clips. Each is listed and numbered in the diagram above, or you can order the complete Agitator Assembly (D012-1700).
Can I rebuild the CMPS-QDZ agitator or should I replace the whole assembly?
If only the bristles are worn, the brush strip (B012-2400B) may be all you need; if a bearing is noisy or an end cap is cracked, replace those parts. When several parts are worn at once, the complete Agitator Assembly (D012-1700) is the simplest fix.
Are the CMPS-QDZ agitator parts shared with other CleanMax machines?
Many of the components are shared across the CleanMax CMP-3 family and machines from Riccar, Powr-Flite and Tornado; each product page lists its full compatible-model set. The complete assembly (D012-1700) is specific to the CMPS-QDZ.
How do I order CMPS-QDZ agitator parts or get help?
Click any part in the table to open its product page and add it to your cart, or call us at 763-535-0770. Our staff at 5415 West Broadway, Crystal, MN 55428 has been servicing CleanMax equipment since 1956 and can confirm the right part for your machine.
Looking for parts from another section? Return to the CleanMax CMPS-QDZ parts overview to browse all assemblies, or call us at 763-535-0770.