100. Base Housing Cover QR – 181163681 Joint Complete With Cord 40.25″ – 088720380 151. Stopcord Bracket – 001080305152. Strain Relief – 011620307153. Screw 2.9×16 (Pk 20pcs.) (2.9×16) – 085610009157. Connection Block – 021000400101. Lens Set Red and Green New (Red/Green) – 083950081155. Wrapping of 20 Pcs Screw 2.9×9.5 (20pcs) – 087420009156. Cord Clamp – 001100305154. Power Cord 40.25″ – 023590320114. Switch Activator Pin – 000670036115. Spring – 010480009113. Support Left Joint – 080440381116. Microswitch – 020640000117. Screw 2.2×16 (Pk 20pcs.) (2.2×16) – 086950009Joint Pin Slide – 002280305110. Screw 2.9 X 16 PKG/20 – 085610009108. Spring Dowel Release – 010390009107. Plunger Handle Release – 000840036142. Brush Adjuster – 000990305105. Screw 3.9×13 (Pk 20pcs.) (3.9×13) – 085590009143. Adjusting Knob Dark Grey New (Dark Grey) – 003750104110.Screw 2.9×16 (Pk 20pcs.) (2.9×16) – 085610009110. Screw 2.9 X 16 PKG/20 – 085610009111. Slide – 000970305106. Support Right Joint – 080430381109. Bushing – 000650036119. Filter – 010720316144. Rear Axle – 011380009145. Big Wheel – 002270000 146. Wheel Retainer New – 012840009138. Shoe Plate M30 (12″) W/clips + New Front Wheels Shaft – 089700081139.Front Wheel Rubber – 002260000140. Spring – 010430009141. Spring Stop Plate – 000680036132. Roller Support – 080370011137. Bumper 12″ Dark Gray (12″) – 000600112120. Motor Filter – 010580016118. Circuit Board 12″ V.120 W.160 (12″) – 020610000133. Brush Shoe Plate 12″ New (12″) – 005860333134. Wrapping of 20 Pcs Roller Cover Clip (20pcs) – 087491381135. Screw 3.5×9.5 TG (Pk 20pcs.) (3.5×9.5) – 085540009131. Brush Roller 12″ – 081710381128. Pulley – 086160381127. Transmission Support w/Bearings – 080360011126. Timing Belt 7 mm (7mm) – 010790300121. Brush Motor 100/120V 380 (12″-14″) – 050030080122. Spacer Pinion – 002890029123. Pinion – 002880029124. Wrapping Of 20 Pcs Nut M4 — 180160009 130. Brush Shaft With Insert 12″ – 080880081125. Screw 3.9×16 (Pk 20pcs.) (3.9×16) – 085560009136. Body Main Brush Head 12″ Marble White w/ Clips (12″) – 087560281112. Foot Pedal Dark Gray (Dark Gray) – 001920105105. Screw 3.9 X 13 PKG/20 – 085590009150. Swivel Connector D.32 (D32) – 002790305147. Screw 3.5×19 (Pk 20pcs.) (3.5×19) – 086440009Image | Name | Description | Price | Quantity | Add to cart |
|---|---|---|---|---|---|
 | The Lindhaus belt (part# 010790300) is the genuine OEM 7mm drive belt that connects the brush motor pinion to the brush roll in the power nozzle. This Lindhaus belt loops over the motor pinion and the brush roll pulley, transmitting the motor’s rotation so the brush spins and agitates carpet fibers. It is a shared […] | $16.00 | |||
 | The Lindhaus big wheel (part# 002270000) is the genuine OEM large rear wheel that carries and rolls the power nozzle across the floor. This Lindhaus big wheel mounts on the head’s rear axle and lets the nozzle glide smoothly while keeping the brush roll at the correct height above the carpet. It is a shared […] | $7.80 | |||
 | The Lindhaus brush adjuster (part# 000990305) is a genuine OEM part that sets the brush-roll height on a wide range of Lindhaus power nozzles. The Lindhaus brush adjuster lets the agitator sit at the correct depth for each carpet pile or bare floor, so a broken or worn Lindhaus brush adjuster leaves the brush too […] | $7.40 | |||
 | The Lindhaus brush motor (part# 050030080) is the genuine OEM 100-120V motor, model 380, that drives the brush roll in the power nozzle. This Lindhaus brush motor is the dedicated agitator motor whose pinion turns the belt to spin the brush, providing the deep-cleaning agitation that lifts embedded dirt from carpet. It is a shared […] | $148.00 | |||
| The Lindhaus Brush Shaft 12″ (part# 080880081) is a genuine Lindhaus OEM replacement part. This lindhaus brush shaft is the 12 inch core that the brush roll is built around, carrying the bristle strips and end fittings as it spins inside the power head. A bent or worn lindhaus brush shaft makes the whole roll […] | $27.36 | |||
| The Lindhaus Brush Shoe Plate (part# 005860333) is a genuine Lindhaus OEM replacement part. This lindhaus brush shoe plate is the sole plate on the underside of the power head that slides across the floor and frames the brush-roll opening. A cracked or worn lindhaus brush shoe plate lets the head sit unevenly or drag, […] | $37.20 | |||
| The Bumper 14 Dark Grey (part# 000600112) is a genuine Lindhaus replacement trim piece shared across several Lindhaus power-nozzle models. It runs along the leading edge of the 14-inch brush head, taking the impact whenever the nozzle meets furniture legs, baseboards, and door casings so the housing and the surfaces around it stay unmarked. Every […] | $29.80 | |||
| The Bushing 000650036 (part# 000650036) is a genuine Lindhaus replacement bearing sleeve shared across many Lindhaus power nozzles. It lines the bore where a shaft or axle turns, providing a smooth, low-friction surface that lets the moving part rotate quietly and stay centered. Sitting between a rotating shaft and the housing, this sleeve absorbs the […] | $1.60 | |||
| The Lindhaus Circuit Board (part# 020610000) is a genuine Lindhaus OEM replacement part. This lindhaus circuit board is the electronic control board that manages power to the brush motor and runs the indicator lights on the head. When a lindhaus circuit board fails, the power brush may refuse to start, cut out at random, or […] | $62.00 | |||
| The connection block (part# 021000400) is the genuine Lindhaus electrical connection block that joins wiring between sections of the machine. It provides a secure, organized junction for the power and control conductors. Because it carries the machine’s wiring junctions, the block is central to reliable operation, and heat or vibration can loosen or damage it […] | $2.20 | |||
| The cord clamp (part# 001100305) is a genuine Lindhaus replacement clamp shared across the PB12, PB12e, PB14, and PB14e power nozzles. It secures the power cord against the housing so the cord stays neatly routed and is not tugged loose at its connection points during use. A working cord clamp takes the load off the […] | $1.00 | |||
 | The Lindhaus Filter (part# 010720316) is a genuine Lindhaus OEM replacement part. This lindhaus filter captures fine dust and debris inside the power-brush head so the air moving through the machine stays clean. A dirty or clogged filter chokes airflow and lets fine particles pass, so changing it on a regular schedule keeps pickup strong […] | $4.40 | |||
 | The Lindhaus Foot Pedal (part# 001920105) is a genuine Lindhaus OEM replacement part. This lindhaus foot pedal is the dark gray on/off actuator you press with your foot to switch the power brush on and off. When it cracks or stops latching, the whole head becomes awkward to operate, so keeping a spare foot pedal […] | $10.40 | |||
 | The Lindhaus front wheel rubber (part# 002260000) is a genuine OEM replacement tire for the front wheel on a wide range of Lindhaus uprights and power nozzles. This Lindhaus front wheel rubber presses onto the wheel hub and gives the nozzle a quiet, non-marking roll across hard floors and carpet, so a hardened or torn […] | $5.60 | |||
 | Genuine Lindhaus Joint Complete With Cord 42.25″ (part# 088720380), a factory replacement part for the Lindhaus models below. Compatible Lindhaus Models Lindhaus PB14e Lindhaus PB14 Lindhaus PB12e Lindhaus PB12 Not sure if this fits your machine? Call 763-535-0770 — Twin City Vacuum, since 1956, 5415 West Broadway, Crystal, MN 55428. | $82.28 | |||
| The Lindhaus Joint Pin Slide (part# 002280305) is a genuine Lindhaus replacement part used across a range of Lindhaus power brushes and uprights. The Lindhaus Joint Pin Slide is the pin that forms the pivoting joint between the handle and the nozzle, letting the handle recline and swing smoothly while holding the two sections positively […] | $2.80 | |||
| The Lindhaus Lens Set (part# 083950081) is a genuine Lindhaus OEM replacement part. This lindhaus lens set is the matched pair of red and green indicator lenses that snap over the status lights on the power-brush head. A clear lindhaus lens set lets you read the machine’s indicators at a glance, so a cracked or […] | $8.60 | |||
| The adjusting knob dark grey is the dark-grey control the operator turns to set the power nozzle for different floor types, matching the brush height to carpet pile or hard floors so the head glides and cleans at the right level. It is a genuine Lindhaus OEM part, part number 003750104, priced at $10.60. It […] | $10.60 | |||
| The brush roller is the 12-inch agitator that spins inside the Aria’s power nozzle, its bristles reaching into carpet pile to loosen and sweep up dirt, pet hair, and fibres so the suction can carry them away. It is a genuine Lindhaus OEM part, part number 081710381, priced at $33. As the only part of […] | $33.00 | |||
| This Lindhaus screw pack (part# 086440009) is a pack of 20 genuine OEM self-tapping fasteners measuring 3.5 by 19 mm. Each Lindhaus screw is a shared body-panel and internal-hardware fastener that fits the Lindhaus Aria, HCP 12″, HCP 14″, Valzer, PB12, PB12e, PB14, PB14e, and RX Hepa. Buying a pack of 20 keeps spares on […] | $7.00 | |||
 | The lindhaus main brush head (part# 087560281) is the genuine 12-inch marble white nozzle body, supplied complete with its clips, for the Lindhaus PB12 power nozzle. This lindhaus main brush head is the structural shell that carries the brush roll, the motor drive, and the shoe plate, giving the PB12 the rigid platform it needs […] | $84.26 | |||
| The lindhaus motor brush cover (part# 083960281) is a genuine Lindhaus replacement housing panel, finished in light grey, for the PB12 electric power nozzle. This lindhaus motor brush cover snaps over the motor and brush-roll drive area of the nozzle body, sealing the internal components against carpet fibers, grit, and everyday household dust so the […] | $50.00 | |||
| The lindhaus shoe plate m30 (part# 089700081) is the genuine 12-inch sole plate for the Lindhaus PB12 power nozzle, supplied with its retaining clips and a new front wheels shaft. This lindhaus shoe plate m30 forms the underside of the nozzle: the smooth face that glides across the floor and sets the working height of […] | $23.30 | |||
 | The Lindhaus microswitch (part# 020640000) is the genuine OEM electrical switch that controls power to the brush motor in the power nozzle. When the handle is lowered the activator pin presses this Lindhaus microswitch closed, energizing the brush motor; raise the handle and the microswitch opens, stopping the brush. Because it is a shared component, […] | $16.60 | |||
 | The Lindhaus motor filter (part# 010580016) is the genuine OEM foam filter that guards the motor from fine dust and debris. This Lindhaus motor filter sits in the airflow path ahead of the motor, catching particles that slip past the main bag or filter so they cannot reach the windings and bearings. It is a […] | $8.40 | |||
| The lindhaus nut (part# 180160009) is a genuine M4 fastener nut used on the Lindhaus PB12 and PB14 power nozzles. This lindhaus nut secures internal brackets and hardware inside the nozzle; replace it if the original is stripped, cross-threaded, corroded, or lost during a repair. Twin City Vacuum has been selling and servicing Lindhaus equipment […] | $25.40 | |||
 | This cord is made to fit the Maid Brigade powerheads. Will fit both PB12 and PB14. Part# 022260320 | $23.00 | |||
 | The Lindhaus pinion (part# 002880029) is the genuine OEM drive gear that presses onto the brush motor shaft and transfers power to the brush roll. This Lindhaus pinion is the small toothed gear that engages the drive belt or gear train, converting the motor’s rotation into the spinning action that agitates the carpet. It is […] | $4.99 | |||
| The Plunger 000840036 (part# 000840036) is a genuine Lindhaus replacement actuator shared across many Lindhaus power nozzles. It is the small pushing element in the head’s release mechanism, transferring motion from a pedal or lever to the latch or catch it operates. Each time you engage the mechanism, the plunger travels to trip the catch […] | $2.40 | |||
 | The Lindhaus pulley (part# 086160381) is a genuine OEM Lindhaus pulley used across a wide range of Lindhaus upright and power-nozzle vacuums. The Lindhaus pulley sits on the brush-roll drive line and transfers rotation from the toothed motor belt to the agitator, so a worn or cracked Lindhaus pulley is one of the most common […] | $9.40 | |||
 | The Rear Axle 011380009 (part# 011380009) is a genuine Lindhaus replacement shaft used across many Lindhaus power nozzles. It carries the rear wheels of the brush head, supporting the back of the nozzle and setting the trailing ride height as the machine is worked back and forth. At the back of the head the rear […] | $13.00 | |||
| The Lindhaus Roller Cover Clip (part# 087491381) is a genuine Lindhaus OEM replacement part, supplied as a pack of two. Each lindhaus roller cover clip secures the roller cover on the underside of the power head so it stays locked in place during cleaning yet releases when you need to reach the brush roll. A […] | $14.60 | |||
| The Roller Support 080370011 (part# 080370011) is a genuine Lindhaus replacement bracket used across several Lindhaus power brushes. It cradles the end of the brush roller inside the nozzle housing, holding the agitator on its axis so it spins true against the carpet. With the roller support in good condition the brush roll turns smoothly […] | $21.80 | |||
| The Lindhaus screw set (part# 086950009) is a genuine OEM package of 20 self-tapping 2.2 x 16 mm screws used to assemble Lindhaus power brush heads and body housings. Buying this Lindhaus screw pack of 20 means you always have the correct fasteners on hand when servicing a head, so you are not reusing stripped […] | $7.60 | |||
 | The Lindhaus screw 2.9×16 (part# 085610009) is a genuine 2.9 mm x 16 mm replacement fastener, sold here as a pack of 20. This Lindhaus screw 2.9×16 pack of 20 secures housing panels and components on your machine, giving you plenty of spares to replace stripped, lost, or corroded screws during service. Compatible Models for […] | $8.60 | |||
 | The Lindhaus Screw (part# 085540009) is a genuine Lindhaus OEM 3.5 by 9.5 mm TG replacement screw. This lindhaus screw fastens head and housing components on a wide range of Lindhaus power brushes and uprights. Stripped, rusted, or missing screws are worth replacing with the correct original hardware to keep the assembly tight and serviceable. […] | $8.00 | |||
| This lindhaus screw (part# 085560009) is a genuine Lindhaus 3.9mm x 16mm self-tapping replacement screw used throughout many Lindhaus vacuums to secure housings, covers, and internal brackets. If a screw has stripped, rusted, or gone missing during a repair, this is the correct factory fastener to put things back together properly. Twin City Vacuum has […] | $7.60 | |||
 | The lindhaus screw 3.9×13 (part# 085590009) is a genuine Lindhaus 3.9 mm x 13 mm self-tapping fastener used to secure housing panels and internal components during assembly. It is sold individually as a direct OEM replacement for a screw that has been stripped, lost, or corroded, so hardware matches the original thread, diameter, and length […] | $9.60 | |||
| The Slide 000970305 (part# 000970305) is a genuine Lindhaus replacement component shared across many Lindhaus power nozzles. It is the moving element that travels along a fixed track in the head’s mechanism, guiding a linked part smoothly between its positions. Because it rides a track, this part must stay clean-edged and true; a straight, unworn […] | $1.06 | |||
| The Lindhaus spacer (part# 002890029) is a genuine OEM spacer used in the power brush head to set correct positioning on the shaft or axle alongside the pinion and brush roll. This small Lindhaus spacer keeps the drivetrain components properly aligned so the pinion and belt run true, and replacing a lost or worn spacer […] | $2.40 | |||
| The Spring 010430009 (part# 010430009) is a genuine Lindhaus replacement tension component shared across many Lindhaus power nozzles. It stores and releases force within the head’s mechanism, returning the part it drives to its resting position after each use. A healthy spring holds its rated tension, so the mechanism it serves snaps back crisply and […] | $1.20 | |||
| The Lindhaus power brush spring (part# 010480009) is the genuine OEM return spring inside the power nozzle that works alongside the switch activator pin and microswitch. This Lindhaus power brush spring provides the light, consistent tension that pushes the actuating pin back to its rest position, so the head microswitch releases cleanly and the brush […] | $1.00 | |||
| The Spring Stop Plate 000680036 (part# 000680036) is a genuine Lindhaus replacement component shared across many Lindhaus power nozzles. It captures and locates the tension coil in the head’s mechanism, giving that coil a fixed surface to push against so it can store and release force reliably. By holding the coil in place, the spring […] | $0.50 | |||
| The detente spring (part# 010390009) is a genuine Lindhaus OEM replacement part fitted across a wide range of Lindhaus power nozzles and upright floor tools. This detente spring supplies the light, positive tension behind a detent mechanism, giving you the firm click you feel when a control locks into position. Because the same part is […] | $1.20 | |||
 | The stopcord bracket (part# 001080305) is a genuine Lindhaus replacement cord-anchor bracket shared across the PB12, PB12e, PB14, and PB14e power nozzles. It holds the power cord’s stop knot or clamp firmly at the housing so tugging on the cord cannot pull it free of the internal connections. A secure stopcord bracket protects the wiring […] | $4.00 | |||
| The strain relief (part# 011620307) is a genuine Lindhaus replacement cord bushing for the PB12 and PB14 power nozzles. It grips the power cord where it enters the housing, spreading out the bending load so the cord is not stressed, kinked, or chafed at the entry point. A sound strain relief is a small but […] | $2.20 | |||
| The Lindhaus Support Left Joint (part# 080440381) is a genuine Lindhaus OEM replacement part. This lindhaus support joint is the molded left-side bracket that helps hold the power-brush head together and forms the pivot on the left of the assembly. A cracked or worn lindhaus support joint lets the head flex, rattle, or sit crooked, […] | $15.80 | |||
| The Support Right Joint 080430381 (part# 080430381) is a genuine Lindhaus replacement bracket shared across many Lindhaus power nozzles. It forms the right-hand pivot connection between the brush head and the neck, letting the nozzle swivel while transmitting your steering input to the head. As the right-side hinge, this joint carries the steering and twisting […] | $15.80 | |||
| The Lindhaus switch activator pin (part# 000670036) is the small genuine OEM pin inside the power brush head that trips the head microswitch. As you tilt the handle back to vacuum, the mechanism pushes this Lindhaus switch activator pin against the microswitch, telling the brush motor to run; return the handle upright and the pin […] | $1.00 | |||
| The swivel connector (part# 002790305) is a genuine Lindhaus replacement rotating joint shared across the PB12, PB12e, PB14, and PB14e power nozzles. It links the wand to the nozzle and lets the head pivot and turn smoothly while keeping the connection sealed, so you can steer the nozzle around furniture without the coupling binding. A […] | $7.20 | |||
| The Lindhaus Transmission Left Support (part# 080360011) is a genuine Lindhaus OEM replacement part. This lindhaus transmission support is the left-side bracket that holds the brush-roll transmission in position so the belt and drive stay properly aligned. When a lindhaus transmission support cracks or wears, the brush roll can wobble and the belt can track […] | $23.80 | |||
| The wheel retainer (part# 012840009) is a genuine Lindhaus OEM replacement component shared across many Lindhaus power nozzles and upright floor tools. This small but essential part locks the rear transport wheel onto its axle so it cannot work loose during normal vacuuming. Because the same wheel retainer is used on so many models, this […] | $1.06 | |||
| The lindhaus screw (part# 087420009) is a genuine Lindhaus fastener sold as a pack of 20. Each lindhaus screw measures 2.9 by 9.5 mm and is the correct factory screw for the PB12, PB12e, PB14, and PB14e power nozzles. Keep a pack of 20 on hand for brush head and housing repairs. Browse more Lindhaus […] | $7.80 |