Lindhaus Joint Pin Slide 002280305
$2.80
Genuine Lindhaus Joint Pin Slide (part# 002280305). Fits Lindhaus HCP 14″, Valzer, PB12, PB12e, PB14, PB14e. In stock at Twin City Vacuum, Crystal MN — call 763-535-0770.
The Lindhaus Joint Pin Slide (part# 002280305) is a genuine Lindhaus replacement part used across a range of Lindhaus power brushes and uprights. The Lindhaus Joint Pin Slide is the pin that forms the pivoting joint between the handle and the nozzle, letting the handle recline and swing smoothly while holding the two sections positively together. Because it takes the load of every recline and turn, the pin wears over time and is a common cause of a loose or stiff handle joint.
What the lindhaus joint pin slide does
Seated in the handle-to-nozzle hinge, the Lindhaus Joint Pin Slide is the bearing surface the joint rotates on, so the operator can lower the handle to clean under furniture and stand it upright for storage. A snug, smooth pin gives the joint a controlled, quiet pivot. As the pin wears, the joint develops play, clicks, or binds, and the handle can feel sloppy or refuse to hold its angle.
Common signs that the Lindhaus Joint Pin Slide needs replacing include a handle joint that wobbles side to side, a pivot that is stiff, notchy, or squeaks, a handle that will not stay reclined, or visible wear and scoring on the pin. Replacing a worn pin is an inexpensive way to bring a tired handle joint back to a tight, smooth action instead of living with a loose or sticky pivot.
Installation is quick with basic hand tools: unplug the vacuum, release the retaining hardware at the joint, slide the old pin out, and fit the new part in its place. Twin City Vacuum has been selling and servicing Lindhaus equipment since 1956, so if you want us to confirm the correct pin for your machine we are glad to help. Browse more Lindhaus vacuum parts, or view the full range at the official Lindhaus site.
Compatible Models
- Lindhaus HCP 14″
- Lindhaus Valzer
- Lindhaus PB12
- Lindhaus PB12e
- Lindhaus PB14
- Lindhaus PB14e
Lindhaus Joint Pin Slide — Frequently Asked Questions
What does the Lindhaus Joint Pin Slide (part# 002280305) do?
It is the pin that forms the pivoting joint between the handle and the nozzle, letting the handle recline and swing smoothly while holding the sections together.
How do I know if my Lindhaus Joint Pin Slide needs replacing?
A wobbly, stiff, or squeaking handle joint, a handle that will not stay reclined, or a scored pin all mean the Lindhaus Joint Pin Slide should be replaced.
What models is the Lindhaus Joint Pin Slide (part# 002280305) compatible with?
It fits the Lindhaus HCP 14″, Valzer, PB12, PB12e, PB14, and PB14e.
How do I order the Lindhaus Joint Pin Slide (part# 002280305) or get help?
You can add the Lindhaus Joint Pin Slide (part# 002280305) directly to your cart on this page, or call us at 763-535-0770. Our staff at 5415 West Broadway, Crystal, MN 55428 has been servicing Lindhaus equipment since 1956 and can help confirm the right part for your machine.
Questions? Call us at 763-535-0770 or visit us at 5415 West Broadway, Crystal, MN 55428.
