Find genuine Lindhaus LB3 M38 power brush replacement parts. Can’t find your part? Call us at 763-535-0770.
Click on any numbered part in the diagram below to go directly to that part’s product page.
100. Motor Brush Cover Grey – 181164681101. Lens Set LED Light Grey – 181174681102. Joint Complete – 080350381103. Joint Kit Black – 180750381104. Joint Pin Slide – 002280305105. Screw 3.9×13 (Pack of 20) – 085590009106. Support Right Joint – 080430381107. Plunger Handle Release – 000840036108. Spring Dowel Release – 010390009109. Bushing – 000650036110. Screw 2.9×16 (Pack of 20) – 085610009111. Slide – 000970305112. Foot Pedal Blue – 001923805113. Support Left Joint – 080440381114. Switch Activator Pin – 000670036115. Spring – 010480009116. Microswitch – 020640000117. Screw 2.2×16 (Pack of 20) – 086950009118. Circuit Board M30 12" 160 W – 020610000119. Filter – 010720316120. Motor Filter – 010580016121. Brush Motor 380 (12"-14") – 050030080125. Screw 3.9×16 (Pack of 20) – 085560009126. Timing Belt 7 mm – 010790300127. Transmission Support W/Bearings – 181570029128. Pulley – 060290081129. Side Light Cover – 009044146130. Drive Joint Base – 088620081131. LB3 Eco-Force and LB3 L-ion Digital Pro: Brush Roller 38 Black (Standard) – 009630301 / LB3 L-ion Digital Pro: LB3 L-ion Digital Pro Brush Roller M38 (14") Bristle 0.15 White + Insert – 184370301132. Roller Support M38 – 181580029133. Brush Shoe Plate M38 (14") – 005870333134. Roller Cover Clip (Pack of 20) – 087491381135. Screw 3.5×9.5 TG (Pack of 20) – 085540009136. Base Housing 14" Grey with Clips – 181664681137. Bumper 14" Blue – 000593812138. Front Axle – 011320029139. Front Wheel Nylon Silver Grey – 003090004140. Spring – 010430009141. Spring Stop Plate – 000680036142. Brush Adjuster – 000990305143. Adjusting Knob Blue – 003753804144. Rear Axle – 011380009145. Big Wheel – 002270000146. Wheel Retainer – 012840009149. Screw 3.5×19 (Pack of 20) – 086440009151. Felt Ring – 010980017152. Blocking Joint – 005930305153. Transmission Support Complete – 181590029158. Pinion + Nut – 182730081This is the M38, the 14-inch power nozzle for the Lindhaus LB3 Eco-Force and LB3 L-ion Digital Pro, numbered to match the current Lindhaus drawing above: the grey motor brush cover and LED lens set, the neck joint, joint kit and blocking joint, the brush motor, circuit board, timing belt and pulley, the 14-inch brush roller, the transmission support with bearings, the roller support, base housing, brush shoe plate and bumper, the wheels, rear axle, brush adjuster and blue adjusting knob, and the screws and pins that hold it together. Both LB3 models use the same M38 parts, with one exception: Lindhaus also lists a 14-inch bristle brush roller for the L-ion Digital Pro, shown as a labeled row under callout 131. The carbon brush for the brush motor is listed but not drawn, so it is shown at the end of the table. Twin City Vacuum has been selling and servicing Lindhaus equipment since 1956. Call 763-535-0770 or stop by 5415 West Broadway, Crystal, MN 55428.
Lindhaus LB3 AccessoriesBags, filters, charger and tools
New Lindhaus LB3Eco-Force and L-ion Digital Pro uprightsLindhaus LB3 M38 Power Brush Parts — Frequently Asked Questions
Does the M38 use the same parts on the LB3 Eco-Force and the LB3 L-ion Digital Pro?
Yes, with one exception. Lindhaus lists the same M38 parts for both LB3 models, and also lists a 14-inch bristle brush roller (part# 184370301) for the L-ion Digital Pro alongside the standard black roller (part# 009630301). Both rollers are in the table under callout 131.
How do I know whether I have the M38 or the M30 nozzle?
Turn the nozzle over and measure the brush roller opening. The M38 is the 14-inch nozzle; the M30 is the 12-inch nozzle and has its own drawing, linked below. The roller, belt housing and base parts are sized differently, so check before you order.
When should I replace the brush roller on the M38?
Replace it when the bristles are worn short or uneven, when the roller no longer picks up from carpet as it did, or when an end cap or bearing is damaged. Check the timing belt (callout 126) at the same time: a stretched or cracked belt makes a new roller slip.
How do I find the right part on the diagram?
Find the part on the drawing and click its red dot. A dot with one part opens it in a new tab; the brush roller dot jumps to the two labeled roller rows in the table. Every part page lists all the Lindhaus models it fits.
See the other LB3 drawings: M30 power brush, LB3 Eco-Force body and LB3 L-ion Digital Pro body, or go back to the Lindhaus LB3 parts hub. Manufacturer information is at lindhaus.com/us. Questions? Call us at 763-535-0770 or visit us at 5415 West Broadway, Crystal, MN 55428.



















































