Lindhaus Pinion + Nut 182730081
$8.72
Genuine Lindhaus Pinion + Nut (part# 182730081). Fits Lindhaus Diamante Eco-Force, Dynamic Eco-Force, PB12e, PB14e. In stock at Twin City Vacuum, Crystal MN — call 763-535-0770.
The Lindhaus Pinion and Nut (part# 182730081) is a genuine Lindhaus replacement drive component that transfers turning power from the power-nozzle motor to the brush roller. Sold as a matched pinion gear with its retaining nut, this drive set is the small but critical link that keeps the agitator spinning at full speed on the models it fits.
Inside a Lindhaus power brush, the pinion gear presses onto the motor shaft while the nut locks it in place so it cannot back off under load. As the motor turns, the Lindhaus Pinion and Nut engages the brush-roller drive and delivers consistent bristle rotation for deep carpet agitation. When the gear teeth wear, strip, or the retaining nut loosens, the roller slows, stutters, or stops turning entirely even though the motor still runs.
Typical symptoms that point to a worn Lindhaus Pinion and Nut include a brush roller that spins freely by hand but will not drive under power, a rattling or grinding noise from the nozzle head, or reduced pickup on carpet because the bristles are no longer agitating fibers. Replacing the Lindhaus Pinion and Nut restores the original power transfer and is far cheaper than replacing a whole nozzle. Installation is straightforward for anyone comfortable opening the brush housing: remove the roller, slide off the old gear, fit the new gear set, and torque the nut securely.
Twin City Vacuum has been selling and servicing Lindhaus equipment since 1956. Browse more Lindhaus vacuum parts or read the full specifications on the official Lindhaus USA site.
Compatible Models for the Lindhaus Pinion and Nut
- Lindhaus Diamante Eco-Force
- Lindhaus Dynamic Eco-Force
- Lindhaus PB12e
- Lindhaus PB14e
Frequently Asked Questions About the Lindhaus Pinion and Nut
What does the Lindhaus Pinion and Nut do?
The Lindhaus Pinion and Nut (part# 182730081) transfers motor power to the brush roller, driving the agitator so the bristles rotate at full speed for effective carpet cleaning.
How do I know if my Lindhaus Pinion and Nut needs replacing?
If the brush roller stops turning or slips while the motor runs, or you hear grinding from the nozzle, the pinion gear teeth are likely worn and the drive set should be replaced.
What models is the Lindhaus Pinion and Nut (part# 182730081) compatible with?
It fits Lindhaus Diamante Eco-Force, Dynamic Eco-Force, PB12e, PB14e. Call us at 763-535-0770 to confirm the right part for your machine.
How do I order the Lindhaus Pinion and Nut (part# 182730081) or get help?
You can add the Lindhaus Pinion and Nut (part# 182730081) directly to your cart on this page, or call us at 763-535-0770. Our staff at 5415 West Broadway, Crystal, MN 55428 has been servicing Lindhaus equipment since 1956 and can help confirm the right part for your machine.
Questions? Call us at 763-535-0770 or visit us at 5415 West Broadway, Crystal, MN 55428.
