Mytee HP120 Grand Prix Parts — Models HP120 and HP120-SS

Find genuine Mytee HP120 parts for the HP120 Grand Prix heated automotive detailing extractor, Model HP120 and Model HP120-SS. Pick the area of the machine below, click your part on Mytee’s factory drawing, and order it. Can’t find your part? Call us at 763-535-0770.

Which HP120 Do I Have?

Mytee builds the Grand Prix as the HP120 and the HP120-SS. Mytee’s price list describes the HP120-SS as the same machine supplied with a stainless steel tool, and both models share one Mytee parts book, so every part on these pages fits both. Check the model label on the machine if you are not sure.

HP120 Grand Prix Parts Diagrams

Mytee HP120 Grand Prix base, pump and heater parts diagram

Base, Pump & Heater

Base, pump, heater and its plumbing, 10-inch wheels, 4-inch casters, axle and the pump fittings.

Mytee HP120 Grand Prix solution tank and plumbing parts diagram

Solution Tank & Plumbing

Solution tank and lid, faucet fill, handle, strainer, quick disconnect, vacuum hose and Cuff-Lynx starter.

Mytee HP120 Grand Prix recovery tank and vacuum motor parts diagram

Recovery Tank & Vacuum Motor

Recovery tank, clear lid and gasket, float shut-off, 3-stage vacuum motor, switches and plate, drain valve and spout.

Mytee HP120 Grand Prix A907 heater parts diagram

A907 Heater

The 1,200-watt A907 heater: castings, heating rods, thermostats and fittings.

Two items in the parts book are not drawn: the E999 electrical harness and the hose and tool supplied with the machine (below).

HP120 Grand Prix Accessories

Mytee supplies the HP120 with a 15-foot 1.25-inch vacuum and solution hose (8501), a 4-inch upholstery tool and a Heatguard hose wrap, and lists a 2-inch Cuff-Lynx reducer among its included items. The stainless steel 8400 tool is also available as an alternative.

About Mytee HP120 Parts

Mytee calls the Grand Prix the workhorse for car washes and detail bays. It carries a 10-gallon solution tank and a 10-gallon recovery tank, a 3-stage vacuum rated at 100 CFM and 130 inches of water lift, a 120 PSI diaphragm pump at 1.3 gallons per minute, and a 1,200-watt inline heater that brings solution up to 210 degrees. It rolls on 10-inch foam-filled rear wheels and 4-inch locking front casters, and runs everything from one 25-foot 12/3 cord.

Those specifications tell you where HP120 repairs usually start. Weak suction is almost always a sealing part: the clear lid and its gasket, the drain valve, a vacuum motor gasket or a Cuff-Lynx connection. Spray problems start at the solution strainer, the quick disconnects and the pump. Cold solution points to the A907 heater and its rods and thermostats. If the vacuum stops on its own, check the float switch (E373) and its relay (E632) before the motor.

Shop the Mytee HP120 Grand Prix machine, browse the full Mytee lineup, see parts for every Mytee machine, or read Mytee’s own HP120 Grand Prix page. Twin City Vacuum has been selling and servicing cleaning equipment since 1956.

Frequently Asked Questions

Which HP120 do I have, the HP120 or the HP120-SS?

Mytee builds the HP120 Grand Prix as the HP120 and the HP120-SS, which Mytee’s price list describes as the same machine with a stainless steel tool. Both use the same Mytee parts book, so every part on these pages fits both. The model number is on the machine label.

What are the most common HP120 replacement parts?

The parts that wear with use: the 7-inch vacuum lid gasket (G091), the screen and foam filters (G097 and G022), the vacuum motor gasket (G004), the solution strainer (B119A), the drain valve (H225), the quick disconnects and the casters and wheels. The heater rods (E571) and the vacuum motor (C302LA) are the larger repairs.

Which pump does the HP120 use?

Mytee’s HP120 parts list gives item 30 as part C306. Call us at 763-535-0770 before ordering a pump and we will confirm the right one for your machine.

What if my part says Call on the parts list?

Mytee does not sell every tank, lid, hose and fastener on its website. Call us at 763-535-0770 with the part number from the list and we will order it for you.

How do I order HP120 Grand Prix parts or get help?

Open the area of the machine from the cards above, click your part on the diagram or in the table, and add it to your cart. Our staff at 5415 West Broadway, Crystal, MN 55428 can confirm the part against your machine first: call 763-535-0770.

Looking for a specific part? Use the diagrams above to browse the complete parts list, or call 763-535-0770 and we will find it for you.