Find genuine Mytee HP120 vacuum motor parts and recovery tank parts for Model HP120 and HP120-SS. Can’t find your part? Call us at 763-535-0770.
Click on any numbered part in the diagram below to go directly to that part’s product page.
96. Starter Cuff Gasket – G22367. 2-Position Rocker Switch – E53668. 3-Hole Switch Plate – H33815. Flat Washer #8 – H61220. Plastite Screw #10 x 1/2 in, Stainless – H02984. Foam Filter – G02285. 1.9 in Screen Mesh Filter – G09790. PVC Pipe 1-1/2 in – PH633-1/486. 1-1/2 in PVC Slip Adapter – P50288. PVC Pipe 1-1/2 in – PH633-787. 1-1/2 in 45 Degree PVC Adapter – P50389. PVC Pipe 1-1/2 in – PH633-2.587. 1-1/2 in 45 Degree PVC Adapter – P50378. 45 Degree Drain Spout – H22677. 1-1/2 in Drain Valve – H22576. 2 in Inlet Elbow Assembly – A92682. 7 in Clear Vacuum Tank Lid – G09083. Screw #8 x 5/8 in Phillips Oval, Stainless – H30481. 7 in Vacuum Lid Gasket – G09170. Vacuum Motor Gasket – G00472. 3-Stage Low-Amp Vacuum Motor – C302LA14. 1/4 in Stainless Flat Washer – H21018. Lock Washer 1/4 in, Stainless – H21313. Bolt 1/4-20 x 4 in Hex, Zinc – H09673. Bolt 1/4-20 x 1/2 in Serrated Hex Flange – H77074. 2 x 2 in L-Bracket – H390A69. Vacuum Tank, HP120 – P74837. 12mm External C-Clip – H04279. Axle 7.94 in x 1/2 in – H50789. PVC Pipe 1-1/2 in – PH633-2.591. 1-1/2 in MPT PVC Adapter – P52092. Gasket 1-1/2 in PVC – G22293. 1-1/2 in Steel Lock Nut – H31475. 2 in Vinyl Cuff-Lynx Male Starter – H135V71. 3.25 in Vacuum Motor Spacer – H50380. Wheel 3 in – H358B94. Bulkhead Washer 1-1/2 in PVC – H30599. 1/4 in NPT Nut – B15645. 9/16 in ID Flat Washer – H212100. Buna Hand Tool Valve Gasket – G10545. 9/16 in ID Flat Washer – H21298. 1/4 in 45 Degree Brass Street Elbow – B13059. 1/4 in 90 Degree Brass Street Elbow – B10397. Vacuum Shut-Off Float Switch – E373104. Screw 10-32 x 1/2 in Socket Head – H389105. Flat Washer #8 – H6126. 10-32 Kep Nut – H2736. 10-32 Kep Nut – H273This page covers the recovery side of the HP120 Grand Prix: the vacuum tank, the clear 7-inch lid and lid gasket, the float shut-off switch, the inlet elbow and filters, the drain valve and 45-degree drain spout with their PVC fittings, the C302LA 3-stage vacuum motor with its gasket and spacers, the rocker switches and switch plate, and the small wheels and axle on the tank. Mytee does not sell the tank, PVC pipe or some of the hardware on its website; those rows say Call. Twin City Vacuum has been selling and servicing cleaning equipment since 1956. Call 763-535-0770 or stop by 5415 West Broadway, Crystal, MN 55428.
Mytee HP120 Recovery Tank & Vacuum Motor Parts List
Frequently Asked Questions
What Mytee HP120 vacuum motor parts are on this diagram?
The C302LA 3-stage vacuum motor, its G004 gasket, the three H503 spacers and H096 bolts, the G022 foam filter and the H135V Cuff-Lynx and G223 gasket at the inlet.
My HP120 has weak suction. What should I check?
The clear lid and G091 gasket, the drain valve, the screen filter and the Cuff-Lynx connections, before the motor. Most suction loss is an air leak.
Why does my HP120 vacuum shut off by itself?
The E373 float switch stops the vacuum when the recovery tank is full. If it stops with an empty tank, clean the float, then check the switch and its E632 relay.
Do these parts fit the HP120-SS?
Yes. The HP120 and HP120-SS share one Mytee parts book, so every part on this page fits both.
Need another area of the machine? Go back to the Mytee HP120 Grand Prix parts diagrams, browse parts for every Mytee machine, or see Mytee’s own HP120 Grand Prix page.




























