Mytee 2 in Vinyl Cuff-Lynx Male Starter H135V

$12.00

Mytee 2-inch vinyl Cuff-Lynx Male Starter (part# H135V): the threaded vacuum inlet the hose snaps onto. Fits the Mytee Lite 8070, Speedster, Breeze, HP90, HP120, Air Hog, Flood Hog and Escape models (see full list).

The Mytee Cuff-Lynx Male Starter H135V is the 2-inch vinyl vacuum inlet fitting that the hose connects to on a long list of Mytee spotters, extractors and vacuum boosters. On the Mytee Lite 8070 it threads into the front of the recovery tank with a bulkhead gasket, and the 2-inch female Cuff-Lynx on the end of the hose pushes onto it.

Compatible Models for the Mytee Cuff-Lynx Male Starter H135V

This fitting appears in the current Mytee parts drawing for every machine listed above.

What the Cuff-Lynx male starter Does

Cuff-Lynx is Mytee’s own hose-connector system. The male starter is the machine half: one end is a 2-inch male cuff that the hose snaps onto, the other is a 2-inch male pipe thread that screws into the tank. Mytee makes this version from vinyl rather than hard plastic and says the vinyl Cuff-Lynx resist cracking and splitting, sit low so they store well on a hose reel, and help reduce suction loss at the connection.

Signs It Needs Replacing

Replace the starter when the cuff is split or cracked, when the threads are damaged so it will not seal in the tank, or when the hose no longer seats firmly and pulls off while you work. A leaking connection at the tank inlet shows up as weak suction at the wand or upholstery tool and a whistling sound at the fitting.

Specifications

  • Part number: H135V
  • Type: 2-inch vinyl Cuff-Lynx male starter
  • Connections: 2-inch male cuff x 2-inch male pipe thread (Mytee parts drawing)
  • Material: vinyl
  • UPC: 811189033846

Fit a new bulkhead gasket when you replace the starter, and do not overtighten the thread into a plastic tank. On the Mytee Lite the matching hose-end reducer is the H122V. Browse every numbered part on the Mytee Lite 8070 parts diagrams, or see Mytee’s own listing for part H135V on mytee.com.

Find this part on the Mytee Lite 8070 parts diagrams, Mytee HP90 Stingray parts diagrams, Mytee HP120 Grand Prix parts diagrams, Mytee 1000DX-200 and 2005CS parts diagrams, Mytee 1001DX-200 and 2008CS parts diagrams, Mytee 1003DX Speedster parts diagrams, Mytee 1005LX Speedster parts diagrams, Mytee LTD5-LX Speedster parts diagrams, Mytee LTD12-LX Speedster parts diagrams, Mytee BZ-102LXH Breeze parts diagrams, Mytee 7303LX Breeze parts diagrams, Mytee 7000LX Breeze parts diagrams, and Mytee Escape ETM-LX-PLUS Breeze parts diagrams, where you can click it on Mytee’s factory drawing.

Frequently Asked Questions

What does the Cuff-Lynx male starter do on a Mytee extractor?

It is the 2-inch vacuum inlet on the machine. The hose’s female Cuff-Lynx pushes onto it, and the threaded end screws into the recovery tank.

How do I know if my H135V Cuff-Lynx starter needs replacing?

A cracked or split cuff, damaged threads, or a hose that will not stay connected are the signs. Each causes suction loss at the tool.

What models is the Cuff-Lynx Male Starter (part# H135V) compatible with?

It is in the parts drawing for the Mytee Lite 8070, HP90, HP120, 2008CS, 1000DX-200 (and 2005CS), 1001DX-200, 1003DX, 1005LX, LTD5-LX, LTD12-LX, BZ-102LXH, 7303LX Air Hog, 7000LX Flood Hog and Escape ETM-LX-PLUS.

How do I order the Cuff-Lynx Male Starter (part# H135V) or get help?

You can add the Cuff-Lynx Male Starter (part# H135V) to your cart on this page, or call us at 763-535-0770. Our staff at 5415 West Broadway, Crystal, MN 55428 has been servicing Mytee equipment and can help confirm the right part for your machine.

Questions about the Cuff-Lynx male starter (part# H135V)? Call us at 763-535-0770 or visit us at 5415 West Broadway, Crystal, MN 55428.

Reviews

There are no reviews yet

Be the first to review “Mytee 2 in Vinyl Cuff-Lynx Male Starter H135V”

Your email address will not be published. Required fields are marked *