Mytee HP90 Stingray Heated Automotive Detailing Extractor
Price range: $2,070.00 through $2,087.00
The Mytee HP90 Stingray is a heated automotive detailing extractor for mobile detailers. It pairs 5-gallon tanks with a 1,200-watt in-line heater, a 120 PSI pump and a 100 CFM 3-stage vacuum, protected by an automatic shut-off float and run from one 25-foot cord. Available with the standard or stainless steel upholstery tool.
The Mytee HP90 Stingray is a heated automotive detailing extractor built for mobile detailing and upholstery cleaning. Mytee describes it as full-size extraction performance in a compact, mobile-ready body, with a faucet-fill adapter, molded-in lift handles and a fresh water drain. Its 5-gallon tanks, 1,200-watt in-line heater and single power cord make it a step up in capacity from the Mytee Lite 8070 while still fitting in a van or truck.
Mytee HP90 Stingray Cleaning Performance
A revamped 1,200-watt in-line heater produces hot water quickly to loosen tough grime in seats, carpet and floor mats. The single 3-stage low-amp vacuum motor is rated at 100 CFM with 130 inches of water lift, and the diaphragm pump delivers 120 PSI at 1.3 GPM. An automatic shut-off float protects the vacuum motor from accidental overflows. Every component runs from one 25-foot 12/3 cord drawing 20 amps, so you only need a single outlet wherever the job is.
Built for Mobile Detailing
The roto-molded polyethylene body resists rust and denting and rides on 3-inch locking casters at all four corners. Molded-in carry handles make lifting it in and out of a vehicle easier, and the compact 28 × 16 × 32 inch footprint fits a van, truck or storage area. A faucet-fill adapter speeds up filling, and a high drain valve lets you empty the recovery tank straight into a standard bucket.
Standard or Stainless Steel Upholstery Tool
Choose the Upholstery tool option above before adding to cart. Standard is the HP90 (Mytee model HP90). Stainless steel is the HP90-SS — the same machine supplied with the stainless steel upholstery tool.
What’s Included with the Mytee HP90 Stingray
- 15 ft. 1.25″ vacuum and solution hose (Mytee part 8501)
- 4″ upholstery tool (Mytee part 8400P; HP90-SS: supplied with the stainless steel upholstery tool)
- Heatguard™ hose wrap, made of neoprene wetsuit material
HP90 Specifications
| Models | HP90 (standard upholstery tool); HP90-SS (stainless steel upholstery tool) |
|---|---|
| Solution tank | 5 gallon (19 L) |
| Recovery tank | 5 gallon (19 L) |
| Vacuum motor | One 3-stage motor, 100 CFM, 130″ water lift |
| Vacuum shut-off | Yes — automatic shut-off float |
| Pump | Diaphragm, 120 PSI, 1.3 GPM |
| Heater | 1,200-watt in-line |
| Power cord | Single 25′ (7.6 m) 12/3 cord |
| Amp draw | 20 amps (110–120V, 60Hz) |
| Body | Roto-molded polyethylene; 3″ locking casters all around |
| Net weight | 65 lb (29.5 kg) |
| Dimensions | 28″ × 16″ × 32″ |
| Shipping weight | 80 lb (36.3 kg) |
| Shipping dimensions | 29″ × 15.5″ × 33″ |
Manuals and Documents
Mytee publishes the HP90 user manual, the Air Lite™ upholstery tool instructions and the Stingray sell sheet. Full manufacturer documentation is on the HP90 Stingray page at mytee.com.
Buy the Mytee HP90 Stingray from Twin City Vacuum
Twin City Vacuum has been selling and servicing cleaning equipment since 1956 at 5415 West Broadway, Crystal, MN 55428. Need something smaller? The Mytee Lite 8070 has 4-gallon tanks. Browse the full Mytee equipment line or our other carpet extractors.
Compare Mytee Detailing Extractors
| Model | Mytee Lite 8070 Heated Carpet Extractor | Mytee HP90 Stingray Heated Automotive Detailing Extractor You are viewing this model | Mytee HP120 Grand Prix Heated Automotive Detailing Extractor | Mytee 80-120 Prep Center S All-In-One Detail Machine |
|---|---|---|---|---|
| Heater (W) | 1,000 | 1,200 | 1,200 | 1,200 |
| Pump (PSI) | 120 | 120 | 120 | 120 |
| Solution tank (gal) | 4 | 5 | 10 | 12 |
| Recovery tank (gal) | 4 | 5 | 10 | 12 |
| Vacuum (CFM / in. water lift) | 100 CFM / 130 in. | 100 CFM / 130 in. | 100 CFM / 130 in. | 100 CFM / 130 in. |
| Cord (ft) | 25 | 25 | 25 | 25 |
| Net weight (lb) | 45 | 65 | 109 | 144 |
| Included tools | 8501 15 ft hose, 4 in. upholstery tool, P590 QD covers, A110 drain hose | 8501 15 ft hose, 8400P 4 in. upholstery tool, Heatguard hose wrap | 8501 15 ft hose, 4 in. upholstery tool, Heatguard hose wrap | 8400P upholstery tool, 25 ft combo hose, 25 ft dry hose, claw, crevice and blower tools |
| Price | From $1,475.00 | From $2,070.00 | From $2,258.00 | $3,701.00 |
| View | View | View | View |
Frequently Asked Questions
What is the Mytee HP90 Stingray used for?
It is a heated automotive detailing extractor built for mobile detailers. It cleans seats, carpet and floor mats with hot water and packs full-size extraction performance into a compact body that fits in a van, truck or storage area.
How does the HP90 protect its vacuum motor from overflow?
An automatic shut-off float stops the vacuum before the recovery tank overflows, protecting the vacuum motor from accidental overfills.
How many power cords does the HP90 need?
One. The pump, vacuum motor and heater all run from a single 25-foot 12/3 power cord, and Mytee lists the amp draw at 20 amps on 110–120V.
How does the HP90 compare to the Mytee Lite 8070?
The HP90 has 5-gallon tanks against the 8070’s 4 gallons, a 1,200-watt heater against 1,000 watts, an automatic shut-off float and locking casters all around. It weighs 65 lb net, against 45 lb for the 8070.
What is the difference between the HP90 and the HP90-SS?
The HP90-SS is the same machine supplied with the stainless steel upholstery tool. Choose Standard or Stainless steel in the Upholstery tool option on this page.
How do I order the HP90 or get help?
Choose your upholstery tool option and add the machine to your cart on this page, or call Twin City Vacuum at 763-535-0770. Our store is at 5415 West Broadway, Crystal, MN 55428.
Questions? Call us at 763-535-0770 or visit us at 5415 West Broadway, Crystal, MN 55428.
| Upholstery tool | Standard, Stainless steel |
|---|
Reviews
There are no reviews yet