Find genuine Mytee Lite 8070 parts for the Mytee Lite heated carpet and upholstery spotter, Model 8070 and Model 8070-SS. Pick the area of the machine below, click your part on Mytee’s factory drawing, and order it. Can’t find your part? Call us at 763-535-0770.
Which Mytee Lite Do I Have?
Mytee builds the Mytee Lite as the 8070 and the 8070-SS. Mytee’s price list describes the 8070-SS as the same machine supplied with a stainless steel upholstery tool, and both models share one parts book, so every part on these pages fits both. Check the model label on the machine if you are not sure.
Mytee Lite 8070 Parts Diagrams
Tanks, Handle & Vacuum Motor
Recovery and solution tanks, caps and gaskets, filters, the 3-stage vacuum motor, handle, Cuff-Lynx inlet, hose and upholstery tool.
Base, Pump & Plumbing
Base, wheels and casters, switches, the 120 PSI pump, the heater assembly, valves, quick disconnects and solution plumbing.
Heater Assembly
The A901 1,000-watt heater: cast heater body, heating rod and both thermostats.
Mytee Lite 8070 Accessories
The Air Lite upholstery tool, the 15-foot hose combo and the Cuties covers are supplied with the Mytee Lite; the stainless 8400 is an alternative tool.
About Mytee Lite 8070 Parts
Mytee calls the Mytee Lite its best-selling unit, and detailing professionals like it for its lightweight build. Mytee’s product guide gives the 8070 a 4-gallon solution tank and a 4-gallon recovery tank, a single 3-stage vacuum motor rated at 100 CFM and 130 inches of water lift, a 120 PSI diaphragm pump delivering 1.3 GPM, and a 1,000-watt heater reaching up to 210 degrees. It rolls on 6-inch rear wheels with 2-inch locking front casters, runs on a single 25-foot 12/3 power cord, and draws 19 amps at.
Those specifications tell you where Mytee Lite 8070 parts usually come from. Suction problems are almost always a sealing part: the cap gasket, the foam filter, a vacuum motor gasket or a Cuff-Lynx connection. Spray problems start with the solution strainer and the quick disconnects before the pump itself. The machine also ships with a hose combo, a Cuff-Lynx reducer, the Air Lite upholstery tool, a Heatguard hose wrap, the handle with basket and a drain hose, all of which can be replaced on their own.
Shop the Mytee Lite 8070 machine, browse the full Mytee lineup, see parts for every Mytee machine, or read Mytee’s own Mytee Lite 8070 page. Twin City Vacuum has been selling and servicing cleaning equipment since 1956.
Frequently Asked Questions
Which Mytee Lite do I have, the 8070 or the 8070-SS?
Mytee sells the Mytee Lite as the 8070 and as the 8070-SS, which Mytee’s price list describes as the same spotter with a stainless steel tool. Both share one Mytee parts book, so every part on these pages fits both. The model number is on the machine’s label.
What are the most common Mytee Lite 8070 replacement parts?
The parts that wear with use: the 6-inch cap gasket (G031), the foam filter (G022), the vacuum motor gaskets (G004), the Cuff-Lynx connectors (H135V and H122V), the Cuties quick-disconnect covers (P590) and the 8501 hose combo.
Does the Mytee Lite 8070 have a heater?
Yes. Mytee rates its REAL HEAT heater at 1,000 watts and up to 210 degrees. The heater assembly and its thermostats have their own diagram on the Heater Assembly page.
What if my part says Call on the parts list?
Mytee does not sell every screw, washer and nut on its website. Call us at 763-535-0770 with the part number from the list and we will order it for you.
How do I order Mytee Lite 8070 parts or get help?
Open the area of the machine from the cards above, click your part on the diagram or in the table, and add it to your cart. Our staff at 5415 West Broadway, Crystal, MN 55428 can confirm the part against your machine first. Call 763-535-0770.
Looking for a specific part? Use the diagrams above to browse the complete parts list, or call 763-535-0770 and we will find it for you.







