Find genuine Mytee Lite 8070 pump parts, base parts and solution plumbing for Model 8070 and 8070-SS. Can’t find your part? Call us at 763-535-0770.
Click on any numbered part in the diagram below to go directly to that part’s product page.
32. 10-32 Kep Nut – H2734. 10-32 x 1/2 in Pan Head Screw – H23015. 1/4 in Stainless Flat Washer – H21034. Base – P58535. 13.63 in Axle – H24136. 6 in Wheel – H27937. 12mm External C-Clip – H04238. 1/2 in Axle Cut Washer – H25438. 1/2 in Axle Cut Washer – H25432. 10-32 Kep Nut – H27332. 10-32 Kep Nut – H27340. Flat washer, #10, stainless – H28941. Socket head cap screw, 10-32 x 1/2 in – H38939. Plastite screw, #10 x 1/2 in, stainless – H02942. 2-Position Rocker Switch – E53643. Cord Strain Relief Fitting – H22044. 3-Hole Switch Plate – H31045. Lock nut, 1/2 in, electrical – H2214. 10-32 x 1/2 in Pan Head Screw – H23046. Connecting plate – H31347. 7/8 in Bumper – G06832. 10-32 Kep Nut – H27332. 10-32 Kep Nut – H2734. 10-32 x 1/2 in Pan Head Screw – H23015. 1/4 in Stainless Flat Washer – H21057. 3/8 in MPT x 1/4 in FPT Brass 90 Degree Elbow – B21256. 1/4 in Male Open-Spray Quick Disconnect – B260A58. 120 PSI Demand Pump – C30551. Ferrule, .50 in ID x 1 in – B17449. 3/8 in MPT x 1/4 in Brass Hex Bushing – B10550. 1/4 in Barb x 1/4 in MPT 90 Degree Brass Elbow – B15248. 1/4 in Swivel Barb Adapter with Gasket – B11059. 1000 Watt Heater Assembly – A90154. 1/4 in MPT Brass Check Valve – B11660. 1/4 in FPT 90 Degree Brass Elbow – B20761. 10 in Solution Hose – AH10621. 1/4 in 90 Degree Brass Street Elbow – B10366. 1/4 in Brass Hex Nipple – B10732. 10-32 Kep Nut – H27367. Quick Disconnect Mounting Plate – H48468. Screw, 10-32 x 3/4 in pan head, stainless – H25669. 1/4 in Female Quick Disconnect, FPT – B10260. 1/4 in FPT 90 Degree Brass Elbow – B20753. 14.5 in Solution Hose – AH18466. 1/4 in Brass Hex Nipple – B10761. 10 in Solution Hose – AH10633. 2 in Locking Swivel Caster – H68155. 1/4 in Female Quick Disconnect – B259A52. Solution hose, 1/4 in silicone braided, clear – PH634-1553. 14.5 in Solution Hose – AH18421. 1/4 in 90 Degree Brass Street Elbow – B10362. 1/4 in Brass Tee – B11363. Brass Relief Valve – B20064. 1/4 in Barb x 1/4 in MPT Brass Adapter – B10951. Ferrule, .50 in ID x 1 in – B17465. Solution hose, 1/4 in silicone braided, clear – PH634-1548. 1/4 in Swivel Barb Adapter with Gasket – B11021. 1/4 in 90 Degree Brass Street Elbow – B1034. 10-32 x 1/2 in Pan Head Screw – H2307. 10-32 x 1-1/4 in Pan Head Screw – H22215. 1/4 in Stainless Flat Washer – H2104. 10-32 x 1/2 in Pan Head Screw – H23015. 1/4 in Stainless Flat Washer – H210Find genuine Mytee Lite 8070 base, pump and plumbing replacement parts for Model 8070 and 8070-SS: the P585 base, rear axle, 6-inch wheels and 2-inch locking casters, the switch plate and rocker switches, the cord strain relief, the C305 120 PSI pump, the A901 heater assembly, check and relief valves, quick disconnects, brass fittings and internal solution hoses. The electrical harness and Cuties quick-disconnect covers are listed at the bottom of the table. Twin City Vacuum has been selling and servicing cleaning equipment since 1956. Call 763-535-0770 or stop by 5415 West Broadway, Crystal, MN 55428.
Mytee Lite 8070 Pump Parts and Base Parts List
Frequently Asked Questions
Which pump does the Mytee Lite 8070 use?
The C305, a 120 PSI demand pump. Mytee rates the Mytee Lite at 1.3 GPM.
My Mytee Lite sprays weakly. What should I check?
Start with the solution strainer and filter adapter at the tank outlet, then the quick disconnects (B102, B259A and B260A) and the check valve, before replacing the C305 pump.
Where does the hose connect on the Mytee Lite 8070?
To the B102 female quick disconnect on the QD mounting plate at the front of the base.
Do these base and pump parts fit the 8070-SS?
Yes. The 8070 and 8070-SS share one Mytee parts book.
Why is item 70 listed without a dot?
The G221 bulkhead gasket is in Mytee’s parts list for the 8070 but is not drawn on the diagram. Call us to order it.
This page covers the lower section of the Mytee Lite parts drawing. For the tanks, handle and vacuum motor, or the heater components, go back to the Mytee Lite 8070 parts hub, or see the Mytee Lite 8070 on mytee.com. Questions? Call 763-535-0770.



































