Mytee Cord Strain Relief Fitting H220

$5.07

Mytee cord Strain Relief fitting (part# H220) that clamps the power cord at the machine. Fits the Mytee Lite 8070, Focus, HP90, HP120, Tempo, Air Hog, Flood Hog, Hot Turbo and Carpet Shark models (see full list).

The Mytee Strain Relief H220 is the cord strain-relief fitting that clamps a power cord where it enters a Mytee machine. On the Mytee Lite 8070 it holds the 25-foot power cord at the switch plate and is secured with a 1/2-inch electrical lock nut.

Compatible Models for the Mytee Strain Relief H220

H220 is in the current Mytee parts drawing for every model above.

What the cord strain relief Does

A strain relief grips the cord jacket so that a tug on the cord pulls against the fitting, not against the wire connections inside the machine. It also seals the hole the cord passes through and protects the jacket from being cut on the panel edge.

Signs It Needs Replacing

Replace it if it is cracked, if the cord slides freely through it, or if the cord jacket is pulling out of the machine. A loose strain relief is a common cause of intermittent power and damaged internal wiring.

Specifications

  • Part number: H220
  • Description: fitting, strain relief, cord (Mytee parts drawing)
  • Secured with: 1/2-inch electrical lock nut (Mytee Lite 8070)

Tighten the cap until the cord cannot be pulled through by hand, but do not crush the jacket. Browse every numbered part on the Mytee Lite 8070 parts diagrams, or see Mytee’s own listing for part H220 on mytee.com.

Find this part on the Mytee 1700 Focus parts diagrams, Mytee Lite 8070 parts diagrams, Mytee HP90 Stingray parts diagrams, Mytee HP120 Grand Prix parts diagrams, Mytee 80-120 Prep Center S parts diagrams, Mytee S-300 Tempo parts diagrams, Mytee S-300H Tempo Heated parts diagrams, Mytee 2002CS Contractor’s Special parts diagrams, Mytee 7303LX Breeze parts diagrams, Mytee 7000LX Breeze parts diagrams, Mytee Hot Twin Turbo 480-120 Breeze parts diagrams, Mytee Hot Turbo 240-120 Breeze parts diagrams, Mytee Carpet Shark CRB3017 Breeze parts diagrams, and Mytee Carpet Shark CRB3010 Breeze parts diagrams, where you can click it on Mytee’s factory drawing.

Frequently Asked Questions

What does the strain relief do on the Mytee Lite 8070?

It clamps the power cord where it enters the machine so pulls on the cord do not strain the wiring inside.

How do I know if my H220 strain relief needs replacing?

It is cracked, or the cord slides through it.

What models is the Strain Relief (part# H220) compatible with?

It is in the parts drawing for the 1700 Focus, Mytee Lite 8070, HP90, HP120, 80-120, S-300, S-300H, 2002CS, 7303LX Air Hog, 7000LX Flood Hog, both Hot Turbo heaters and both Carpet Shark models.

How do I order the Strain Relief (part# H220) or get help?

You can add the Strain Relief (part# H220) to your cart on this page, or call us at 763-535-0770. Our staff at 5415 West Broadway, Crystal, MN 55428 has been servicing Mytee equipment and can help confirm the right part for your machine.

Questions about the cord strain relief (part# H220)? Call us at 763-535-0770 or visit us at 5415 West Broadway, Crystal, MN 55428.

Reviews

There are no reviews yet

Be the first to review “Mytee Cord Strain Relief Fitting H220”

Your email address will not be published. Required fields are marked *